g brackets can be base or wall mounted.
Two brackets are supplied for each reflector. Reflectors can
be mounted individually or joined together to form a
continuous row. When mounted in a row, one bracket
supports adjacent reflectors for minimum spacing.
Reflector aiming is adjustable and is fixed in position by
rotation locking screws at each mounting bracket. When
mounted in a continuous row, joiner screws lock reflectors
together allowing all in the row to be aimed together.
Standard:
UL listed or CSA certified for damp locations.
(Style 151 smooth painted model with gasketed lens
recommended for damp location use; see Outdoor Section.)
Electrical:
Use 90°C wire for supply connections. 5' (1.5m) wire leads
exit center of reflector. 90° connector and 4' (1.2m) of flexible
metal conduit are provided. Connector can be reversed in
field from front of reflector to back.
Remote electronic HPF thermally protected class P ballast.
Aluminum ballast enclosure includes 7/8" diameter entries and
a knockout for an accessory fuse.
Maximum wire length
between electronic ballast and fixture is 12' for two-lamp
reflectors and 15' for one-lamp reflectors.
Optional electronic dimming ballast; compatible dimmer
switch required (by others). Consult sales representative for
compatibility and specifications.
Maximum wire length
between dimming ballast and fixture is 1' for two-lamp
reflectors and 4' for 1-lamp reflectors.
For complete ballast specifications, see Accessories Section.
C Aluminum L-shaped
mounting brackets
D Rotation locking screw
E
Joiner/alignment screw
F
Flexible metal conduit
with 90° connector
G Ceiling
H Remote ballast in
aluminum enclosure
J
Architectural cove
(for design guidance, see
Applications Section) Compact and flexible - effective indirect cove lighting for
malls, offices, lobbies, conference rooms and corridors Adjustable - all reflectors in a row join and aim together;
rotation locking screws secure position Create rows of any length - modules from 2 to 10 Durable - all parts are aluminum or stainless steel
Style F301
1:8 Scale
Cove
Remote Ballast
Lamp
Luminaire
Length
Length
1 x 2'
24-1/2" (622mm)
1 x 3'
36-1/2" (927mm)
1 x 4'
48-1/2" (1231mm)
1 x 5'
60-3/8" (1533mm)
2 x 3'
73" (1854mm)
2 x 4'
97" (2464mm)
2 x 5'
120-3/4" (3067mm)
Lighting the Ceiling
Small concealed, remote
Two parabolic reflector
sections drive light
across the ceiling from
one edge. An elliptical
section shields the lamp
from normal viewing
angles and redirects its
light to a parabola.
Glare is minimized and
asymmetry of the beam
is maximized resulting
in high beam efficiency
and superior surface
uniformity.
1x32W
T8
1000
Cd
Note: Finish interior of cove matte white for best results. The external shapes of the asymmetric reflectors are trademarks of
elliptipar.
Certain products illustrated may be covered by applicable patents and patents pending.
For a list of patents, see Contents pages. These specifications supersede all prior
publications and are subject to change without notice. © 2007
elliptipar.
elliptipar
114 Boston Post Road, West Haven, Connecticut 06516, USA
Voice 203.931.4455 Fax 203.931.4464

www.elliptipar.com
To Order
To form a Catalog Number
Project:
Type:
elliptipar
C
18.1
Style 301
Note: To order by overall row length, enter ROW CODE in
place of Lamp Code below (see Row Charts on page
C-18.2). Row Code specifies a row complete with all
necessary reflectors, brackets and remote ballasts
A
=
Lamp Code (to specify individual units)
Lamp Wattage (see chart below)
Reflector Configuration, specify 1, 2 or 3
(see chart below)
Example:
A232 = two 32W T8 lamps in nominal 8' reflector;
one 2-lamp ballast
Reflector Configuration
Accessories
S = L-shaped brackets for wall or base mounting
301 = Small concealed, remote ballast
Lamp
Source
4
5
8
7
2
1
F = Linear fluorescent
Mounting
F301 - A225 - S - 00 - 1 - 000
Small concealed fluorescent unit consisting of one nominal 6'
reflector for use with two 25W T8 lamps. Remote 120V
electronic 2-lamp ballast. L-shaped mounting brackets. UL.
Finish
00 = Bright anodized reflector; mill finish brackets and
ballast enclosure
Option
(see Accessories Section for specifications)
00 = No options
0E = Remote emergency battery pack. Consult factory if
dimming is also required.
0Y = Modified to comply with New York City code
XX = For modification not listed, include detailed
description. Consult factory prior to specification.
Standard
0 = UL, Underwriters Laboratories
J = CSA, Canadian Standards Association
Style
Example
S
3 0 1
3
F
0 0
1
2
3
-
-
-
-
-
1
2
3
4
5
6
7
8
2-Lamp
Ballast
2-Lamp Reflector
1-Lamp Reflector
1-Lamp Reflector
1-Lamp
Ballast
1-Lamp Reflector
2-Lamp
Ballast
AFK000X
= Ballast
fuse kit
0 = UL
J = CSA
Order separately. See Accessories Section for specifications.
Lamp Wattage
Lamp Length
Lamp Number
T8 Fluorescent
17
2'
F17T8
25
3'
F25T8
32
4'
F32T8
40
5'
F40T8
For complete lamp and ballast information, see Accessories Section.
T8 lamps by others.
REV. 8/07
6
Voltage
/Ballast
Electronic
1 = 120V
2 = 277V
3 = 347V (Canada)
Dimming*
T = 120V
V = 277V
*
Consult sales representative for dimming 5' lamps (lamp codes
Ax40) and for Reflector Configuration 3. Availability for wattages
and voltages varies with ballast manufacturer and control type -
see
www.elliptipar.com for additional dimming specifications
and limitations. 6/04
elliptipar
Note: Enter row code in place of Lamp Code described on
page C-18.1.
R
=
Row Code
Lamp Combination*
A = All nominal 3' lamps
B = All nominal 4' lamps
C = All nominal 5' lamps
D = Nominal 3' and 4' lamps
F = Nominal 3' and 5' lamps
G = Nominal 4' and 5' lamps
Nominal Row Length in feet, between 3' and 50' **
Row Code
3
Lighting the Ceiling
Small concealed, remote
C
18.2
Style 301
To order by Row Code - T8 lamps
When the Style 301 small concealed T8 fluorescent is run
continuously in
straight coves, elliptipar offers the option of
specifying and ordering the entire row as one catalog number.
Ordering by row eliminates the need to calculate length, type
and quantity of reflectors.
Steps to specify Row Code:
1. Determine clear inside length of cove.
2. Round up to nearest foot and find the nominal row length
in chart.
3. Determine what lengths/wattages of lamps will be used and
select the corresponding lamp combination codes.
Example: If only 3' and 4' lamps are to be used on the
project, specify row codes ending with
A, B and/or D only.
4. If for a given nominal row length a preferred lamp
combination is not listed, select the next shorter row that is
available in the desired lamp combination.
5. Once the nominal row length and lamp combination has
been found in the chart, note the actual overall row length
(last column).
6. Consider the unlighted length at each end of the row.
(Subtract the overall row length from the clear inside length,
and divide the remainder by two.) It is generally
recommended that the unlighted length at each end be
between 6" and 12".
7. Enter the four character Row Code in place of the Lamp
Code described on page C-18.1. The remainder of the
catalog number is formed as shown on page C-18.1.
*
Not all lamp combinations are available for each nominal row length
(see chart)
**
Nominal row lengths over 50' can be formed by combining shorter
row lengths. (Example: a nominal 60' row can be ordered as two
nominal 30' rows.)
F301 - R15D - S - 00 - 2 - 000
Nominal 15' long row of Style 301 small concealed T8
fluorescent using only 3' (25W) and 4' (32W) lamps. Row
includes one nominal 8' 2x32W reflector, one nominal 6'
2x25W reflector, mounting brackets and remote 277V
electronic ballasts. Overall row length is 14' 2-1/2".
Example
Features Time saving - simplifies specification and ordering One catalog number - includes all necessary reflectors,
brackets and remote ballasts to install row Economical use of 3- and 4-lamp ballasts (when
available) Assured fit - all you need is the clear inside length of
the cove
T8 Fluorescent
Nominal Row
Length (feet)
Lamp
Combination
Nominal 3' Reflector
(1 x F25T8 lamp)
Nominal 4' Reflector
(1 x F32T8 lamp)
Nominal 5' Reflector
(1 x F40T8 lamp)
Nominal 6' Reflector
(2 x F25T8 lamps)
Nominal 8' Reflector
(2 x F32T8 lamps)
Nominal 10' Reflector
(2 x F40T8 lamps)
Overall
Row
Length
04
A
1
3' 1-7/8"
05
B
1
4' 1-7/8"
06
C
1
5' 1-3/4"
07
A
1
6' 2-3/8"
08
D
1
1
7' 2-1/2"
09
B
1
8' 2-3/8"
09
F
1
1
8' 2-3/8"
10
A
1
1
9' 3"
10
G
1
1
9' 2-3/8"
11
C
1
10' 2-1/8"
11
D
1
1
10' 3"
12
D
1
1
11' 3"
12
F
1
1
11' 2-7/8"
13
A
2
12' 3-1/2"
13
B
1
1
12' 3"
14
D
1
1
1
13' 3-5/8"
14
F
1
1
13' 2-3/4"
14
G
1
1
13' 2-7/8"
15
D
1
1
14' 3-1/2"
15
F
1
1
1
14' 3-1/2"
15
G
1
1
14' 2-3/4"
16
C
1
1
15' 2-5/8"
16
D
1
1
1
15' 3-5/8"
17
B
2
16' 3-1/2"
17
F
1
1
16' 3-1/4"
18
D
1
1
1
17' 4-1/8"
18
F
1
2
17' 4"
18
G
1
1
1
17' 3-1/2"
19
A
3
18' 4-5/8"
19
D
1
1
1
18' 4-1/8"
19
F
1
1
1
18' 3-1/4"
19
G
1
1
18' 3-1/4"
20
D
1
2
19' 4-1/8"
20
F
1
1
1
19' 3-7/8"
20
G
1
1
1
19' 3-1/4" The external shapes of the asymmetric reflectors are trademarks of
elliptipar.
Certain products illustrated may be covered by applicable patents and patents pending.
For a list of patents, see Contents pages. These specifications supersede all prior
publications and are subject to change without notice. © 2007
elliptipar.
elliptipar
114 Boston Post Road, West Haven, Connecticut 06516, USA
Voice 203.931.4455 Fax 203.931.4464

www.elliptipar.com
Project:
Type:
elliptipar
C
18.3
Style 301
Lighting the Ceiling
Small concealed
6/04
To order by Row Code - T8 lamps
Nominal Row
Length (feet)
Lamp
Combination
No