EC-2 Installation Guide
EC-2 Installation Guide
Page 1
EC-2 Installation Guide
Product Modification Warning ............................................................................................ 3
FCC Information ................................................................................................................... 3
Important Safety Information .............................................................................................. 4
Warranty Information .......................................................................................................... 4
Caution and Warning Symbols ............................................................................................ 6
Introduction
How to Use this Guide ......................................................................................................... 7
Planning the Installation ...................................................................................................... 7
Unpacking the EC-2 Fixture ...................................................................................... 8
Saving the Shipping Materials ..................................................................................... 8
Identifying EC-2 Components .................................................................................... 8
Circuit Breaker Protection ................................................................................................... 9
DMX 512 Data Cable Specification ..................................................................................... 9
Wire Routing ......................................................................................................................... 9
EC-2 Fixture Installation
Permanent Mounting ......................................................................................................... 10
Securing the Fixture to the Prepared Foundation .................................................... 11
Setting/Changing the Fixture Voltage ............................................................................... 11
EC-2 Wiring Instructions ................................................................................................. 13
Connecting Power Wiring in Standalone Installation .............................................. 13
DMX 512 Data Wiring in a Standalone Installation ................................................. 14
Linking Fixtures ................................................................................................................ 15
Connecting Power Wiring in a Linked Installation ................................................... 15
DMX 512 Data Wiring in a Linked Installation ......................................................... 16
Terminating the Data Link .......................................................................................... 18
Testing EC-2 Installation
Before Powering Up ........................................................................................................... 19
Check Main Power Wiring .......................................................................................... 19
Check DMX 512 Data Wiring ..................................................................................... 19
Check DMX 512 Network Wiring .............................................................................. 19
Powering Up Fixture .......................................................................................................... 20
Installation Checklist .......................................................................................................... 20 Page 2
EC-2 Installation Guide
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45104
Manufacturers name:
High End Systems, Inc.
Manufacturers address:
2
105 Gracy Farms Lane
Austin, Texas 78758 USA
Distributors name:
High End Systems, Inc.
Distributors address:
2
105 Gracy Farms Lane
Austin, Texas 78758 USA
Declares that the product
Product Name:
EC-2
Product Number:
EC-2
Product Options:
All
conforms to the following EEC directives:
73/23/EEC, as amended by 93/68/EEC
89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
Equipment referred to in this declaration of conformity was first manufactured in compliance with the fol-
lowing standards in 2000:
Safety:
EN 60598-1 : 1997
EN 60598-2-17 ; 1989
A1-A3 : 1993
EMC:
EN 55022, 1987 Class A ITE
EN61000-4-2: 1995 Level 2/3 (2/3kV)
EN61000-4-3: 1995 Level 2 (3V/m)
ENV50204:1996: Level 2 (3V/m)
EN61000-4-4: 1995 Level 2 (1/.5kV)
EN61000-4-5: 1995 Level 3 (2/1kV)
EN61000-4-6: 1996 Level 2 (3Vrms)
EN61000-4-11:1994
IEC 1000-3-2/EN 61000-3-2
USA, Sunday, January 07, 2001
Kenneth Stuart Hansen, Compliance Engineer EC-2 Installation Guide
Page 3
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements of
United States and International safety regulations. Modifications to the product could
affect safety and render the product non-compliant to relevant safety standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences des
règlements internationaux de sécurité. Toute modification du produit peut entraîner sa
non conformité aux normes de sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der U.S.
Amerikanischen und internationalen Sicherheitsvorschriften. Abänderungen dieses
Produktes können dessen Sicherheit beeinträchtigen und unter Umständen gegen die
diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i requisiti
delle normative di sicurezza statunitensi ed internazionali. Qualsiasi modifica al prodotto
potrebbe pregiudicare la sicurezza e rendere il prodotto non conforme agli standard di
sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los
requisitos de las reglamentaciones de seguridad de los Estados Unidos e internacionales.
Las modificaciones al producto podrían afectar la seguridad y dejar al producto fuera de
conformidad con las normas de seguridad relevantes.
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense. Page 4
EC-2 Installation Guide
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock, exposure to
excessive ultraviolet (UV) radiation, and injury to persons are found in Appendix B of the
EC-2 User Manual that was shipped with your fixture.
Please read all instructions prior to assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
Les instructions se rapportant à la protection permanente contre les incendies,
lélectrocution, lexposition à un rayonnement ultraviolet (UV) excessif et aux blessures
corporelles se trouvent dans lAnnexe B.
Veuillez lire toutes les instructions avant dassembler, de monter ou dutiliser cet
équipement.
Wichtige Sicherheitshinweise
Sicherheitsanleitungen zum Schutz gegen Feuer, elektrischen Schlag, übermäßige UV-
Strahlung und Verletzung von Personen finden Sie in Anhang B.
Vor der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts alle
Anleitungen sorgfältig durchlesen.
Informazioni Importanti Di Sicurezza
Le istruzioni sulla protezione da incendi, folgorazione, esposizione eccessiva a raggi
ultravioletti (UV) e infortuni sono contenute nellappendice B.
Si prega di leggere tutte le istruzioni prima di assemblare, montare e azionare
lapparecchiatura.
Informacion Importante De Seguridad
En el Apéndice B se encuentran instrucciones sobre p