ions available at customer's request.
BCR/FCR have 48" teflon leads, Type E per MIL 16878/4 16 AWG.
Heavy Duty applications.
Hazardous environment.
Power Transmission.
Signal Telemetry.
ROV applications.
GUIDELINES
Use Dust Caps and keep connectors clean to prevent damage
in storage and service.
Keep o-ring grooves clean and avoid cuts, nicks and tears on
rubber surfaces.
Elastomers can be seriously degraded if exposed to direct
sunlight or high ozone levels for extended periods of time.
Clean plugs and receptacles with soap and fresh water.
Rinse out with alcohol, allowing connector to air dry.
Replace o-rings when re-using connectors.
Un-Terminated versions of CCP available.
NOTE
Also available as inverted series, see following section.
Lubricate mating surfaces with 3M Silicone Spray or equivalent,
DO NOT GREASE! Connectors must be lubricated on a regular basis.
Lubricate o-rings with Dow Corning #111 Valve Lubricant or
Body and engaging nut are 316 Stainless Steel, passivated per
QQ-P-35 Type VI.
All mounting and sealing surfaces require a 32 finish.
Bulkhead connector design open face pressure rated to 5000 PSI.
Contacts gold plated per MIL-G-45204.
24" 22 AWG polyurethane jacketed cable. IE55W-1002/03-CCP, CCP-
IE55-1204/06-CCP, CCP-R/A and CCR are molded on standard
Working voltage - 300 VDC.
Mainly used on small sensor packages.
Type E per MIL16878/4, 24 AWG. IE55W-1002/03-BCR are
IE55-1204/06-BCR are molded on standard 6" Teflon lead,
Tiodized per AMS 2488 TYPE II.
Body and engaging nut are 6AL-4V Titanium. Engaging nut is
Specifications for:
SUBMINIATURE
CONNECTOR
(Bulletin 70 03/06)
R
24" length of 18 AWG SO cable.
equivalent.
R/A and CCR are molded on standard 24" 20 AWG Belden cable.
molded on standard 6" Teflon lead, Type E per MIL 16878/4,
Light duty applications only. METAL SHELL SERIES
©
70 20
Technical Bulletin
rev 0192
2006 Impulse Enterprise, Inc.
1-800-327-0971

IE55 RUBBER MOLDED
IE55-20
STEEL
1.09 DIA
4.35
.50
1.50
.375
O-RING
2-118
3/4-16 UNF-2A
4.50
1.25 HEX
1.60
5.5
MATED
LENGTH
48" TEFLON
LEADS
1.50 DIA
NEOPRENE/
POLYURETHANE
OVERMOLD
OVERMOLD
POLYURETHANE
NEOPRENE/
STAINLESS
STEEL
STEEL
STAINLESS
STAINLESS
~
~
IE55-20-CCR
IE55-20-BCR
IE55-20-CCP
IE55-20-CCP-UT
~
INVERTED AVAILABLE METAL SHELL SERIES
©
70 21
Technical Bulletin
rev 0800
2006 Impulse Enterprise, Inc.
1-800-327-0971

IE55 RUBBER MOLDED
IE55-20
4
IE55-20-CCP-RA
1
2
3
5
4
6
6
8
7
5
4
1
2
3
1
2
3
2
1
3
4
IE55-20 -SCP
IE55-20 -SCR
** Available in high voltage
not to exceed
165 in lbs
10,000
IE55-20-FCR
* Specify number of contacts.
1
2
3
STAINLESS
4.25
1.25
1.75
1.75 1.25
1.50
.50
.375
.740 DIA
48" TEFLON
LEADS
O-RING
2-118
1.50 DIA
NEOPRENE/
POLYURETHANE
OVERMOLD
2.67
MATED 3.67
4X .265 DIA
*
*
STAINLESS
STEEL
STEEL
1#8 / 3#10
8#14
6#10
4#10
3#10
(BCR FACE VIEWS)
CONFIGURATION
CONTACT
DUMMY PLUG FOR
CCP
DUMMY PLUG FOR
BCR, FCR, CCR
FOR BCR
MOUNTING TORQUE
MATED PRESSURE
RATING (psi)
~
(High Voltage)