TIR3 Mounted behind
vehicle grille.
TIR3 Series
TIR3 Super-LED
®
Light Modules
®
TIR3 SERIES - Super
-LED
®
LIGHT MODULES
ENGINEERING COMPANY, INC.
Designed &
Manufactured
in the U.S.A.
LEDs Available in red, amber, blue & white
RVR03ZCR, shown
with black flange
and vertical lens.
Route 145, Winthrop Road
Chester, Connecticut 06412-0684
(860) 526-9504 Fax: (860) 526-4078
www.whelen.com
Whelen Engineering reserves the right to
upgrade and improve products without notice.
FEATURES Highly effective TIR3 Super-
LED
®
surface mount module. Tiny size, dozens of applications. Super-LED tough, low current,
vibration and moisture resistant. Stamped aluminum base. Black polycarbonate mounting
flange, standard (single). 10 Scan-Lock flash patterns,
plus steady-burn and synchron-
ization wire for simultaneous or
alternating TIR3 lightheads or
other modules with similar
synchronization capability. Available in four safety colors. Five year warranty.
MODELS
RS*03ZCR: Horizontal mount.
RV*03ZCR: Vertical mount.
OPTIONS
RFLANGEC: Chrome plated poly-
carbonate mounting flange.
RFLANGEA: Cast aluminum brush
guard mounting flange.
RFLANG2B: Black polycarbonate,
dual surface mount flange for two
lightheads.
RFLANG2C: Chrome polycarbonate,
dual surface mount flange for two
lightheads.
RBKT1 - Aluminum Grille mount
bracket for one RS lighthead (not for
use with RV series).
RBKT2 - Aluminum Grille mount
bracket for two RS lightheads (not for
use with RV Series).
TIR3 Series is the tiny three
Super-LED module with a
big attitude. Encapsulated,
waterproof, low current, TIR3
Super-LEDs are tough as nails
so theyll go to work for you
anywhere on your vehicle,
shrugging off moisture
and road vibration.
Perfect for mounting in the
grille, on side mirrors, on
bumpers, over steps, on
motorcycle boxes and fairing,
on ATVs, forklifts and
material-handling vehicles...
wherever high intensity, wide
angle warning is required.
Harley-Davidson
®
Motorcycle
Stainless Steel Mounting
Bracket Kits
(Includes chrome flange)
RBKTHD1: Side windshield
bracket, for use with one RV series.
RBKTHD2: Side (saddle bag)
crash Bar Bracket, for use with
RS Series.
RBKTHD3: Rear (Saddle Bag)
Crash Bar Bracket, for use with two
RS series.
RBKTHD4L: Under radio box
bracket road side, for use with one
RS series.
RBKTHD4R: Under radio box
bracket curb side, for use with one
RS series.
RBKTHD5: Under headlight
bracket, for use with one RS series.
Form# TIR1004
*
Replace asterisks in model number with
LED color desired:
A = Amber; B = Blue; C = Clear/White; R = Red.
RSA03ZCR, with optional
chrome flange
RSB03ZCR with optional black
dual mount flange
Mounted on
vehicle tailgate. Model RBKTHD4L, Harley Under Radio
Box Bracket, for use with One RS TIR3,
Road Side. Model includes RFLANGEC,
shown mounted on motorcycle rear
bumper bracket.
Model RBKTHD4R, Harley Under Radio
Box Bracket, for use with One RS TIR3,
Curb Side. Model includes RFLANGEC.
Dimensions (both): 7-9/16 (192mm) L
x 1-1/16 (27mm) H x 1.5 (39mm) D
Model RBKTHD3
(above)
, TIR3 Harley
Rear (Saddle Bag) Crash Bar Bracket, for
use with Two RS TIR3. Model includes
RFLANGE2C, shown mounted below
motorcycle rear carrier.
Dimensions: 3-3/4 (95mm) L x
3-11/16 (33mm) H x 1-3/4 (44mm) D
TIR3 DIMENSIONS
(With standard black mounting flange)
3-5/8" (91mm)
1-5/16
(34mm)
1-5/16"
(34mm)
FRONT VIEW
SIDE VIEW
TOP VIEW
TIR3 MOUNTING OPTIONS AND DIMENSIONS
®
Route 145, Winthrop Road
Chester, Connecticut 06412-0684
(860) 526-9504 Fax: (860) 526-4078
Internet: www.whelen.com
MADE IN THE U.S.A.
Whelen Engineering
reserves the right
to upgrade and
improve products
without notice.
© 2004 Whelen Engineering Company, Inc.
Form No.11499E-1004
ENGINEERING COMPANY, INC.
Model RBKT1, aluminum
mounting bracket
(lighthead purchased
separately).
1-3/8"
(35mm)
1-7/16"
(36mm)
1-3/8"
(35mm)
4-1/16
(103mm)
1-5/8"
(41mm)
RFLANGEA Top View
RFLANGEA
Side View
RFLANGEA Front View
3-3/4"
(95mm)
15/16"
(24mm)
2-3/16"
(55.4mm)
3-3/4"
(95mm)
15/16"
(24mm)
RBKT1 Front View
RBKT1 Top View
Model RBKT1
Side View
2-3/16"
(55.4mm)
7-1/2"
(191mm)
7-1/2"
(191mm)
15/16
(24mm)
15/16"
(24mm)
RBKT2 Front View
RBKT2 Top View
RBKT2
Side View
3-3/16
(81mm)
2-1/2"
(64mm)
5/8"
(16mm)
3-9/16"
(91mm)
1/4"
(6mm)
RFLANG2*
Side View
RFLANG2* Front View
RFLANG2B (Black)
C Chrome
RFLANG2
(
)
RFLANG2* Top View
Model RFLANGEA
cast aluminum brush guard
mounting flange
(lighthead purchased
separately).
Model RFLANG2* polycarbonate
mounting flange in chrome (above) or black
polycarbonate (shown on opposite side,
dual lightheads purchased separately).
SPECIFICATIONS
390mA @ 13.6 VDC
FLASH PATTERNS
Scan-Lock -
TIR3 lightheads have a special set of flash patterns, with each
pattern available in two modes; Phase 1 and Phase 2. The patterns are
changed with the WHT/VIO wire. All lightheads configured to display the
Phase 1 mode of a given pattern will flash simultaneously. Any lightheads con-
figured to display the Phase 2 mode of a pattern, will alternate with any Phase
1 lightheads with the same pattern.
Sync -
Two lightheads (or more) can be synchronized, (configure both light-
heads to display the same Phase 1 or Phase 2 pattern in the same simulta-
neous or alternating mode).
Model RBKTHD2
(above)
, TIR3 Harley Side (Saddle
Bag) Crash Bar Bracket, for use with Two RS TIR3.
Model includes RFLANGE2C, shown mounted on
motorcycle low side saddle bumper bars.
Dimensions: 3-11/16 (93mm) L x
3 (77mm) H x 5/8 (16mm) D.
Model RBKTHD5,
Under Harley Headlight
Bracket, for use with one
RS TIR3. Model includes
RFLANGEC and is shown
mounted below motorcy-
cle front headlight.
Dimensions:
2-1/2 (64mm) L x
2-1/4 (57mm) H x
1-5/16 (33mm) D
TIR3 OPTIONAL STAINLESS STEEL MOUNTS for HARLEY-DAVIDSON
®
MOTORCYCLES
Ten TIR3 Scan-Lock Flash Patterns, Plus Steady Burn
PATTERN
MODE
SignalAlert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 1
SignalAlert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 2
CometFlash
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 1
CometFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 2
DoubleFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 1
DoubleFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 2
SingleFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 1
SingleFlash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 2
ComAlert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 1
ComAlert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phase 2
Steady . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . steady-burn
Model RBKTHD1,
(right)
TIR3 Harley Side Windshield
Mounting Bracket Kit, for use
with one RV TIR3 lighthead.
Model includes RFLANGEC,
shown mounted on motor-
cycle windshield.
Dimensions:
7-5/8 (194mm) L x
1-1/4 (33mm) H x
5/8 (16mm) D
Model RBKT2,
dual aluminum mounting
bracket (lightheads
purchased separately).
Harley-Davidson
®
is a registered trademark of H-D Michigan, Inc.