olor=black height=1 colspan=2>

Yes No N/A
FAU Cost Containment Guidelines
January 2007
Division 11 Equipment
1 of 2
Division 11 - Equipment
11130 Audio-Visual Equipment
Has the A/E met with the users, the FAU Facilities Planning Project Manager, and
the FAU Information Resource Management (IRM)/Learning Resources
Department, identified and incorporated the infrastructure (conduits, electric and
data outlets, pull boxes, etc.) for audio-visual equipment (including projectors,
controllers, monitors, televisions, consoles, podiums, etc.)? Have locations for the
equipment been incorporated into the construction documents?
(Specific drawing sheet #/specification page #_______________)
11160 - Loading Dock Equipment
1.
If the projects program requires a loading dock, have the following items been
discussed with the FAU Facilities Planning Project Manager and the users and
specified and shown in the contract documents as required?
(Specific drawing sheet #/specification page #_______________)
2.
Dock levelers.
(Specific drawing sheet #/specification page #_______________)
3.
Adjustable dock ramps.
(Specific drawing sheet #/specification page #_______________)
4.
Portable ramps, bridges, and platforms.
(Specific drawing sheet #/specification page #_______________)
5.
Seals and shelters.
(Specific drawing sheet #/specification page #_______________)
6.
Dock bumpers.
(Specific drawing sheet #/specification page #_______________)
7.
Have provisions been made to adequately light the interior of truck trailers with
dock lights?
(Specific drawing sheet #/specification page #_______________)
11600 - Fume Hood and Exhaust Systems Installations
1.
OSHA regulates and sets standards for Ventilation and Exhaust systems under
Sub-part G - Occupational Health And Environmental Control. 1910.93 Air
Contaminants. Have employees' exposure to materials listed in these standards
been limited as specified? (FAU is responsible for establishing and enforcing
administrative controls as needed to achieve OSHA compliance.)
(Specific drawing sheet #/specification page #_______________)
2.
A significant amount of technical information must be prepared and submitted to
the Owner during Conceptual Schematics, Advanced Schematics, and Design
Development in accordance with the FAU Professional Services Guide. Has the
A/E reviewed the requirements?
(Specific drawing sheet #/specification page #_______________)
3.
The design and installation of exhaust systems (including hoods, ducts, air mover,
and discharge outlet) shall comply with the American National Standard Institute









Yes No N/A
FAU Cost Containment Guidelines
January 2007
Division 11 Equipment
2 of 2
(ANSI) Z9.2-1971 Fundamentals Governing the Design and Operation of Local
Exhaust Systems, the manual, Industrial Ventilation, published by the American
Conference of Governmental Industrial Hygienists 1970; NFPA-91, Blower and
Exhaust Systems; NFPA-45, Laboratory Systems; and the latest American
Society of Heating, Refrigerating and Air Conditioning Engineers' (ASHRAE)
Handbooks. Has the airflow and pressure loss data provided by the manufacturer
of any air cleaning device been included in the design calculations?
(Specific drawing sheet #/specification page #_______________)
4.
Has the "Fire Protection Handbook" current edition as used by the State Fire
Marshal's Office as regulating the design and installation of blower and exhaust
systems, been referenced?
(Specific drawing sheet #/specification page #_______________)
5.
Are hoods used for perchloric acid specified to have identifying signage on the
face of the hood by either the manufacturer's label and/or an appropriate warning
sign indicating: FOR PERCHLORIC ACID ONLY?
(Specific drawing sheet #/specification page #______________)
6.
Has the AE specified the appropriate material for fume hood exhaust piping?
Galvanized steel is to be used only with the written approval of FAU
Environmental Health and Safety Dept. and FAU Engineering & Utilities Dept.
(Specific drawing sheet #/specification page #_______________)
11860 - Waste Handling Equipment
Trash Disposal and Recycling
1.
Has construction debris collection and disposal been discussed with the FAU
Facilities Planning Project Manager and have any special considerations, such as
recycling and separating types of waste, been specified?
(Specific drawing sheet #/specification page #_______________)
2.
Has the finished projects waste handling and disposal needs been discussed with
the FAU Facilities Planning Project Manager and FAU Physical Plant to determine
if waste holding areas within the building are required, if a dumpster area is
required, or if it may be shared with adjacent buildings?
(Specific drawing sheet #/specification page #_______________)
3.
Have areas for recycling bins been provided for in the projects design and has an
area to store recyclables in the building been provided?
(Specific drawing sheet #/specification page #_______________)
4.
Have provisions been made for recycling collection of glass, paper, plastics,
corrugated cardboard, and metals?
(Specific drawing sheet #/specification page #_______________)








End of Division 11 Equipment.