e codes or wherever depend-
able alarms are required. The colored light strobe candela can be
selected either low or high by a switch located on the front housing.
The colored light is available in Amber, Blue, Green and Red. The
light output candela ratings vary depending on the lens color.
In those instances where two or more AMSECO horns and/or
strobes are connected and requires a synchronized code 3 temporal
pattern and/or a synchronized strobe flash, all
Select
-A-
Strobe
models can be synchronized when used in conjunction with
AMSECO UL listed Sync module SMD10-3A to meet the latest code.
Features
� Available colored lights: amber, blue, green, red
� Selectable candela output: Low, Medium, High
� NFPA/ANSI compliant
� UL listed for Ceiling/Wall Mounting under UL 1638
� Designed for use in non-sleeping areas
� Screw terminal capacity up to 12 AWG
� Polarized strobes with wide operating voltage range using filtered
DC or unfiltered FWR input voltage
� Minimum one flash per second (1Hz)
� All models mount to 4" X 4" X 1-" back box or Single Gang Box
� Synchronization requires an AMSECO SMD10-3A (daisy chain)
Sync Module
� Available in red or white housing
Ordering Information
STA
TE O
F CALIFORNIA
STATE FIRE MARSHALL
L I S T I NG
S E R V I C E
C
US
Ceiling/Wall Mount
Patent Pending
The colored visual alarm indicating appliance shall be AMSECO model CSL24C or equivalent device. The Strobe shall be listed under UL
1971 and UL 1638 Standard for signaling devices and shall be approved for fire protective and emergency services. The reflective mirror shall
be of the same color as the lens of amber, blue, green, or red. For outdoor applications and in UL NEMA 4X rated or UL Haz Dust Tight condi-
tions use AMSECO UL/ULC ESH-1229 polycarbonate cover. The candela output shall be field selectable, having three settings of High,
Medium or Low light intensity output. The signaling Strobe shall operate on 24VDC from a non-coded regulated DC supply or full-wave recti-
fied, unfiltered supply. The signaling strobe shall be designed to produce a signal flash of one flash per second with continuously applied mini-
mum voltage. The Strobe shall be capable of CEILING and WALL mounting to a variety of back boxes using the AMSECO SPC-1 retrofit back
plate. When strobe synchronization is required, the Strobe shall be compatible with the AMSECO SMD10-3A (daisy chain) or other source of
AMSECO sync protocol.
Engineering Specifications
Model Number
CSL24C-AW
CSL24C-BW
CSL24C-GW
CSL24C-RW
CSL24C-WW
CSL24C-AR
CSL24C-BR
CSL24C-GR
CSL24C-RR
CSL24C-WR
Input
Voltage
Strobe
Candela
Sync
Module
Mounting
Type
Light
Output
Housing
Color
Colored
Light
Flash Rate
(Times/min)
Temperature
Operating
Range
32�F ~ 120�F
(0�C ~ 49�C)
White
Red
Regulated 24V
DC/FWR
SMD10-3A
Wall or
Ceiling
Mount
Low
Mid or
High
60
Amber
Blue
Green
Red
White
Amber
Blue
Green
Red
White
30 / 54 / 76
16 / 29 / 41
32 / 57 / 80
14 / 25 / 35
30 / 54 / 76
30 / 54 / 76
16 / 29 / 41
32 / 57 / 80
14 / 25 / 35
30 / 54 / 76
CORPORATE OFFICE & WAREHOUSE
2081 Craig Road
St. Louis, Missouri 63146
(800) 325-3936
Fax: (800) 768-8377
Local: (314) 878-4321
www.amseco-kai.com / info@amseco-kai.com CSL24C 10/2004
*Due to continuous development of our product line, specifications are subject to change without notice.
Light Output Dispersion
Mounting Options
SPC-1 Universal Retrofit Plate: designed for mounting to a variety of back boxes.
RBX-1 Back Box Skirt: for surface mount installations.
Dimensions: Inches (mm)
Front View
Side View
Back View
Strobe Selectable Candela Output
F.A.C.P.
Signal
Circuit
INPUT
H
H
OUTPUT
WIRING 1
Control
Panel
To Next
Device
or
End-of-Line
Resistor
SYNC MODULE

SMD10-3A
WIRING 2
Wiring Diagram for using the Sync Module (SMD10-3A)
Wiring Diagrams
6-7/8 (174)
1-13/32 (35)
2-25/32 (70)
3-3/8 (85.7)
3-3/8 (85.7)
4" Square
outlet box
1 1/2" Deep
Select-A-Switch
Select either Low, Mid or High
and replace cap on front of unit.
Example : Amber Colored light
4 Square
Back Box
RBX-1
Back
Box Skirt
RBX-1
Single Gang
Back Box
SPC-1
RBX-1
SPC-1
Double Gang
Back Box
RBX-1
SPC-1
Octagon
Back Box
4 Square
Back Box
CSL24W
Light Output on Axis (cd)
Low Mid High
30
16
32
14
30
76
41
80
35
76
Amber
Blue
Green
Red
White
54
29
57
25
54
Low
Mid
High
Regulated
24V DC
Regulated
24V FWR
116
172
234
162
236
294
Max. RMS Operating
Current (mArms)
Strobe
Light ONLY
Specification