OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330
CUSTOMER SERVICE 800.786.5266
www.tolco.com
163
www.tolco.com
Revision 10/24/2007
Size Range 1/8", 3/16" and 1/4" pre-stretched cable. 3/8" thru 1
1 4
"
hanger rod bolt or fastener.
Material Carbon Steel
Function Cable attachment for sway bracing. Attaches sway brace to
structure or to hanger. To be used with 7 x 19 strand core pre-stretched
galvanized aircraft cable.
Features Cable easily slides into oversized front arch opening.
Breakaway hex nuts assure verification of proper installation. Will mount
to any surface angle.
Approvals Included in our Seismic Restraints Catalog approved by the
State of California Office of Statewide Health Planning and Development
(
OSHPD). For additional load, spacing and placement information relating
to OSHPD projects, please refer to the TOLCO Seismic Restraint System
Guidelines.
Finish Electro-Galvanized
Order By Figure number, cable size and mounting hole size.
Note Order 990H for hanger rod, bolt or fastener hole size 1" thru 1
1 4
".
Fig. 990 - Cable Sway Brace Attachment
Dimensions Weights
Cable


Maximum Design

Diameter A
B Load
Lbs.
1/8" 4
5 16
2
975*
3/16"
5
2
1 4
2050*
1/4"
5
2
5 8
3150*
* Maximum load rating controlled by cable breaking strength.
Component of State of
California OSHPD Approved
Seismic Restraints System