LUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com
Fluke. Keeping your world
up and running.
ToolPaks magnet is used with the
universal hanger and is strong enough to
securely hold you meter.
Two hook-and-loop straps are used with
the universal hanger and can be wrapped
around a pipe or beam.
Now you can hang your meter almost anywhere with
the new Fluke ToolPak
TM
accessories kit. Designed to
work exclusively with the new Fluke 80 Series IV,
ToolPak includes a universal hanger, a magnet, and
9-inch (43 cm) and 17-inch (23 cm) hook-and-loop
hanger straps.
The universal hanger is designed to fit into the
special module on the back of the new Fluke 87-IV
and 89-IV meters. The universal hanger allows you to
hang your meter on a nail, hook or other object. You
can add a piece of rope, flexible wire or cable to hang
the meter in almost any position.
The 9-inch (43 cm) and 17-inch (23 cm) hook-and-
loop straps are used with Flukes universal hanger to
wrap around and connect to a pipe, beam or any other
convenient support structure.
And finally, the special magnet accessory is designed
to connect to either of the straps. The strong magnet
accessory will attach to an electrical panel, a metal
doorjamb or any other ferrous-type metal.
With the universal hanger, two hook-and-loop straps
and the magnet, ToolPak solves almost any hanging
and positioning problem you may face with your new
80 Series IV meter. Call your local Fluke distributor and
ask for the TookPak accessory kit.
©1998 Fluke Corporation. All rights reserved. C0208UEN 12/98 Rev A
1
Hanger inserts
into slot with tab
extension facing
out, for proper use.
2
3
Hanger inserts into slot
tab extension facing out,
for proper use. 1
2
3
LockPak
TM
for Fluke 80 Series IV
Digital Multimeters
Dont let your meter walk away.
Ordering Information
Model LPAK80-4:
Includes the LockPak
accessory
Need technical assistance? Call:
1-800-44-FLUKE
Toll-free in the U.S.
(905) 890-7600 in Canada
(425) 356-5500 other countries
For more information to be sent to
you by fax, call 1-800-FLUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com
Fluke. Keeping your world
up and running.
LockPak is a security accessory that
lets you lock a Fluke 80 Series IV meter
in place.
The LockPak accessory easily fits into the back of the meter, once the rubber
probe holder is removed.
Now you can take long-term, unattended measurements
without the fear of your meter being borrowed.
LockPak is a new security accessory that fits into the
back of a Fluke 87-IV or Fluke 89-IV. When combined
with a cable and padlock, the meter is secured in place
to reduce the threat of theft or loss.
Made of polycarbonate, LockPak is very durable and
should last for years.
LockPak is designed for use similar to lockout, tagout
procedures, and is especially useful for long term,
unattended logging situations with the Fluke 89-IV
digital multimeter.
So dont let your new Fluke meter walk away. Be sure
to purchase a Fluke LockPak accessory.