b Name:





P.O.:
The LITErig has been developed to meet the needs of facilities like ballrooms, meeting rooms, banquet facilities; any area
where the ability to install and remove lighting equipment quickly, with a minimum of time and effort is desirable.

The system is designed to efficiently hang a full lighting system in venues equipped with UniStrut channel track systems. Em-
ploying a unique quick-release mechanism, the hanger will carry 1.25", schedule 40 pipe batten, four lighting instruments, the
SCRimmer Stik, and includes a safety cable assembly.

Built to demanding specifications and constructed of .125" strap steel, 1.5" wide, the hangers are rugged and strong. The cast iron
and steel parts of the quick-set and release system called the Track Tamer is engineered to withstand long, hard use.

The Track Tamer, with its' exclusive 1/4-turn lock, allows an entire assembly to be easily handled and installed or struck by one
person. The entire unit, excluding the luminaries, weighs about eighteen pounds. This modular hanging system is a simple, neat,
and very fast method of deploying and relocating a complete lighting system.
Features


Modular System Components

Easy, Quick-Release System

Durable, Rugged Construction
LITErig
Description
Order Information:
LITErig System Components:
Track Tamer Hanger Scrimmer Stik:
r
2x1200, circuits / watts
Safety Cable Assembly
r
PAR 56 Fixtures
r
4x600, circuits / watts
Aluminum Pipe Batten
Options:
r
Black
r
Vertical Stik Mounting
r
White
r
Horizontal Stik Mounting
r
Custom


Performance Controls






LITErig
a. Track Tamer, Hanger assembly
High strength cast iron handle. Steel screw. Welded
Unistrut nut. .125"Strap steel, 3/8"Bolts and Nuts.
b. 4' Aluminum pipe batten
1.25" Diameter, .140" wall.
c. SCRimmer Stik
Portable dimmer unit rated at 2400 watts total.
Carries either four or two dimmers. Four dimmer units
rated at 600 watts each dimmer, two at 1200 watts
each. Remote and Local digital control. USITT DMX
512 protocol.
d. Safety cable assembly
Closed steel hook, 1/8" wire rope, 3/8" eye bolt.
Note: Shown below is a typical application for the LITErig including some commonly used luminaries. The entire
unit, without the luminaries weighs 18.2 pounds. With the PAR 56 units, each at approximately nine pounds, the com-
plete unit weighs less than 60 pounds.
Horizontal Stik Mounting
System Components:



Specifications subject to change without notice. Specification applicable to standard products only. ©1998

Electronics Diversified, Inc. All rights reserved. Printed in U.S.A.









P156 0703
1675 N. W. Cornelius Pass Rd., Hillsboro, Oregon 97124 U.S.A.1-800-547-2690 or visit our Web Site: www.edionline.com