Paging
LMR is a complete system of cables, connectors, in-
stallation tools and accessories- everything you need to
make your job simple and successful.
Where can LMR
®
cables be used?
Times LMR cables can be used virtually anywhere high
performance coaxial cables are used, including: Internal component and equipment wiring Inter/intra cabinet jumpers Base station and antenna jumpers Tower and pole feeder runs In-building runs, including riser runs and
air-handling plenums Rooftop installations
What sizes of
LMR
®
cable are available?
A full range of LMR cables are available from LMR-100
(0.100") all the way up to LMR-1700-DB (1
1
/
4
"). Because
LMR cables are so flexible, it's possible to eliminate
jumpers entirely in many feeder cable applications. The
elimination of jumper cables provides reduced cost, better
reliability and lower cost- or may even allow the use of a
smaller size feeder cable, while achieving the same loss
as for a larger corrugated feeder.
What are the advantages of LMR
®
?
Times LMR cables have RF performance comparable
to traditional corrugated copper cables, but unlike
corrugated cables they are highly flexible, non-kinking,
and offer unsurpassed ease and speed of connector
installation. Compared to RG type braided cables, LMR
cables offer far lower loss and better RF shielding. These
features make LMR cables the best choice for any wireless
application.
What makes LMR
®
cable
different than corrugated cables?
Design features of Times LMR cable include:
1) Polyethylene Foam Dielectric Closed cell Dry nitrogen gas injected- no moisture to degrade
performance High velocity Low loss
2) High Performance Flexible Shielding System Multi-laminar aluminum composite tape bonded to
the dielectric (800) TMS-COAX www.timesmicrowave.com
5
TIMES

MICROWAVE SYSTEMS
Provides >90dB isolation shielding
(180dB cross talk)
Bonded construction ensures 100% effective
shielding
Acts as a second moisture barrier Outer Braid of tinned copper:
Provides positive means for grounding and
connector attachment
3) Polyethylene Outer Jacket Heavy duty UV, sunlight and weather resistant,
20 to 40 year life
How does LMR
®
cable compare to
RG type braided cable or 9913?
LMR cables have lower loss and far better shielding
than comparably sized braided cables. Polyethylene
jacket, closed cell foam poly dielectric and bonded tape
conductor all contribute to the superior weather resis-
tance of LMR cables compared to braided cables and
9913.
Is there only one type of
LMR
®
cable, or are there options?
Included in this catalog are the many different types of
LMR cables which are available, so you can always be
certain that there is an LMR cable just right for your par-
ticular application. Besides standard LMR cable, Times
offers:
LMR-FR: Fire retardant cable for installation in build-
ing vertical risers or where fire retardancy is critical, both
UL and CSA listed (CMR/CATVR).
LMR-LLPL: Low loss plenum rated cables for use
in virtually any in-building application, including air handling
plenums and spaces where maximum fire retardancy and
low smoke generation are required. LMR-LLPL cables
are the most rugged and easiest to install plenum rated
cables available, especially for difficult installs in older
buildings. Cables are both UL and CSA listed (CMP/
CATVP).
LMR-DB: Watertight cables with an inert flooding
compound injected in the braid to completely eliminate
the possibility of any water migration- with a 10 year
warranty! The DB feature is optional on sizes 600 and
smaller, and standard on sizes 900 and larger.
LMR Ultraflex: Stranded center conductor and
thermoplastic rubber jacket for maximum flexibility.
LMR-MA: Unbonded tape conductor for ease of
removal for special applications.
LMR-PVC: Polyvinylchloride outer jacket for
enhanced flexibility.
LMR-lite: Lightweight version of the standard LMR
cable. Aluminum braid is used instead of tinned copper
braid to offer a lighter weight cable.
FBT: Similar to LMR-LLPL, but with a fluoropolymer
(FEP) outer jacket for high temperature performance up
to 150oC (302oF).
T-COM: The ultimate in low loss, high performance
coax with a triple shielding system pioneered by Times to
achieve enhanced shielding and low passive intermod
(-155dB).
LMR-75: These are 75 Ohm versions of the standard
LMR cable for unsurpassed performance in broadband
video and specialized RF applications.
T-RAD: 50 Ohm leaky feeder cable for RF coverage
up to 2.5GHz. For use in buildings, mines, tunnels or any
enclosed area. Flexible, non-kinking low cost design. (800) TMS-COAX www.timesmicrowave.com
6
TIMES

MICROWAVE SYSTEMS
LMR
®
discussion
What about connectors and
installation tools?
Times offers a complete line of connectors for all its
cables. A wide variety of connector interfaces is offered
for almost every application: N MUHF F BNC 716DIN LC TNC SMA HN UHF
QDS (quick disconnect) Reverse polarity QMA
Special connectors are available, and Times is always
adding new ones. Times also offers a complete line of cable
prep and connector installation tools, so you never will be
frustrated by not having the right tools- Times is your one-
stop source.
Do all Times connectors
require soldering?
An extensive line of solder-pin type connectors is
offered. However, Times has become the recognized
industry leader in developing simplified connectors
especially suited for field applications offering more non-
solder type connectors than any other cable
manufacturers. The Times well-known line of EZ non-
solder connectors has become renowned in the industry.
With center pin contacts made from silver or gold plated
beryllium-copper, EZ connectors are the preferred choice
for quick and reliable field installations.
How can I get cable and tower
installation accessories that
work with LMR
®
cable?
Easy- Times furnishes a complete line of site installation
hardware and accessories- everything you need to get
you from the antenna to the equipment: Ground kits: Perfectly sized to each LMR cable,
with never a chance of the ground strap being too tight
(crushed cable), or too loose (poor grounding). Hangers: Snap-in, butterfly Hoisting grips Weatherproofing kits: Tape and cold shrink Tie wraps Mounting hardware Entry ports and hardware
Does anyone else
make a cable like LMR
®
?
Some have tried, but no one can match Times LMR
when it comes to what's important to the customer. Some
don't even offer anything but cable, while Times offers: The most complete line of cable, connectors
(including EZ), tools and accessories The biggest range of sizes The most cable type options The most extensive distribution network Unsurpassed technical support The assurance that comes from knowing you are
dealing with the industry leader, and The only company with its phone number
printed on every foot of cable we make. You never
have to guess who to call if you have a question or
need help solving a problem, because everything is
supplied by Times.
What about price?
In most cases Times LMR cables and connectors will
save you money compared to corrugated cable. By
combining the lower purchase cost with the ease and speed
of installation, excellent savings are achieved. LMR cables
also offer significant performance advantages compared
to RG type cables at comparable prices. (800) TMS-COAX www.timesmicrowave.com
7
TIMES

MICROWAVE SYSTEMS
How about jumpers
and cable assemblies?
Times manufactures high quality LMR cable
assemblies and Flextech jumpers- 100% factory tested
before shipment for insertion loss and VSWR. Many
of Times' LMR distributors also supply LMR cable
assemblies and provide excellent service, especially
for quick delivery requirements.
Where are LMR
®
cables made?
Times LMR cables are manufactured in our ISO
certified Wallingford, Connecticut plant, where we have
been making high quality coaxial cable for over 60 years.
What about availability?
Times LMR cables, connectors and accessories are
stocked by our vast network of national, regional and
international distributors worldwide, so you are never far
from a convenient source.
How can I get started
using LMR
®
cables?
Easy- just call our friendly Sales Department at either
1-800-TMS-COAX (1-800-867-2629) or 203-949-
8400 and you can also visit our comprehensive web
site at
www.timesmicrowave.com
for product and
technical information or to request other Times
literature.
I'm new at this and
might need help with the
connectors or accessories
Times has put together a CD-ROM with full "how-to"
videos of many of the most popular EZ connectors as
well as ground kits and other accessories. It also includes
all our catalogs and a convenient Loss Calculator. We'd
be glad to send you one to help you do the job right, so
just call us or e-mail us and we'll get one right out to you.
And if you ever need help on a job, just call us- our phone
number is right on the cable.