with 4 sided tip for Mighty-Jack
Stylus with chisel tip for Super-Jack
Stylus spring for Micro-Jack and Paleo
Aro tools
Stylus spring for Super-Jack tool
Stylus holder for sharpening. This allows
you to use a grinding wheel without
burning your fingers. 8 foot poly hose
AIR HOSES, FITTINGS AND
FILTERS
Poly hose kit for ME9100
Air filter for all sizes air scribes
Air filter assembly for poly hose
Air hose fittings and sleeves
Female quick disconnect
Male quick disconnects INGERSOL RAND
BUSHINGS AND STYLI
2 IR stylus for the Paleo Tools modified
EP50
2.5 stylus for the Paleo Tools modified
EP50
Spring for EP50 - 2 stylus shown with
spring. Fits Paleo Tools bushing
Long bushing and styli for IR EP50
Short bushing and styli for IR EP50
Paleo Tools bushing conversion for the
EP50 long and short bushings. These
bushings use a 1/8 diameter stylus.
EP50 spring PARTS FOR PALEO TOOLS
ME-9100 AND CHICAGO
PNEUMATIC TOOLS
Muffler for above-shown ME9100 tool
Cylinders for ME9100 and CP air
scribes. Note the heavy wall base on
the ME unit - it will have longer life than
the stock CP 9361 cylinder on the right.
ME9100 Engraving Stylus - works well
on Green River fish fossils
Air valve tor ME9100 or CP type tools
Front end sleeve for ME9100 or CP
type tools
ME9100 or CP type piston
Air valve retainer clips for ME9100 or
CP type tools
ME 1 (short) bushing
2 bushing for ME9100 and CP 9361
type tools
3 chisel stylus and long chisel stylus
bushing
Short chisel bushing with teflon key; 2
chisel stylus for short bushing
ME short bushing and 1.5 stylus -
these are the parts that come with the
ME9100 sold by Paleo Tools.
Stock bushing for CP type airscribes ME9100 front end with 2 bushing (also fits all CP type
scribes); ME9100 3 stylus and 4 stylus
ME9100 front end with short bushing and 2 stylus -
also fits CP type air scribes.
ME9100 front end with 2 bushing and 3 stylus -
also fits CP type air scribes.
ME9100 front ends with 2 bushings and 4 and
3 styli installed
ME9100 front end with long bushing and 3
chisel stylus - also fits CP type airscribes.
ME9100 front end with short chisel bushing (also
fits CP type airscribes); 2 chisel stylus.
ME9100 1.5, 2, 3 and 4 styli
2 and 3 chisel styli
ME9100 and CP 9361 stock stylus
3 and 2 styli for the tri-tip front end
PARTS FOR PALEO TOOLS
ME9100 AND CHICAGO
PNEUMATIC TOOLS CONT.
Tri-tip front end with bushing and
available styli PaleoAro 2 chisel front end assembly
Brass shutoff valve and shutoff seal for
all types of Aro tools
2, 2.5, 3 and 3.5 styli for the Paleo
Tools Paleo Aro tool
2 chisel stylus for the Paleo Tools
Paleo Aro tool
ARO AND PALEO ARO PARTS
Needle set - six tips ground in different
shapes
PIN VISES AND NEEDLES
Double ended pin vise - shown with cushion and
carbide needle installed. Needles sold separately.
Double ended pin vise without cushion. Vise has four
different sized collets. Needles sold separately.
Swivel ended pin vise. Needles sold separately.
Swivel ended pin vise without cushion. Vise has
four different sized collets.
Stock ARO stylus
Pin vise cushion
Stock stylus spring for Aro tools