=-1 color=blue>
« back to results for ""
Below is a cache of http://www.preformed.com/artsfest/files/literature/PLPCOYLGstSS8-08.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
COYOTE
COYOTE
�
SPLICE TRAYS AND
LITE-GRIP
�
ACCESSORIES Short Trays and Closures
Short Splice
Trays &
Closures
COYOTE RUNT
COYOTE
Expanded RUNT
COYOTE
In-Line RUNT
COYOTE Terminal
(Single Chamber) COYOTE Terminal
(Dual Chamber)
2
6.5"x17"
COYOTE Dome
COYOTE PUP
3 Trays
36 Max
Splice count
6 Trays
72 Max
Splice count
4 Trays
48 Max
Splice count
4 Trays
48 Max
Splice count
8 Trays
96 Max
Splice count
2
6 Trays
72 Max
Splice count
6 Trays
72 Max
Splice count
Low Profile Tray
1
(12 splice count)
Cat. # 80807701
(w/ splice blocks)
or 8001130
(blank)
2 Trays
24 Max
Splice count
4 Trays
48 Max
Splice count
3 Trays
36 Max
Splice count
3 Trays
36 Max
Splice count
6 Trays
72 Max
Splice count
2
4 Trays
48 Max
Splice count
4 Trays
48 Max
Splice count
Standard Tray
(12 splice count)
Cat. # 80806033
(w/ splice block) or
80806182 (blank)
1 Tray
72 Max
Splice count
2 Trays
144 Max
Splice count
2 Trays
144 Max
Splice count
2 Trays
144 Max
Splice count
4 Trays
288 Max
Splice count
2
3 Trays
216 Max
Splice count
2 Trays
144 Max
Splice count
Ribbon Tray
(72 splice count)
Cat. # 80807114
(w/ splice block) or
80808160 (blank)
1 Tray
40 Max
Splice count
3
2 Trays
80 Max
Splice count
3
2 Trays
80 Max
Splice count
3
2 Trays
80 Max
Splice count
3
4 Trays
160 Max
Splice count
2,3
3 Trays
120 Max
Splice count
3
2 Trays
80 Max
Splice count
3
LITE-GRIP
�

Short Tray
3
(40 splice count)
Cat. # LGSTS16
(Single Fusion)
1 Tray
144 Max
Splice count
4
2 Trays
216 Max
Splice count
4
2 Trays
288 Max
Splice count
2 Trays
288 Max
Splice count
4 Trays
576 Max
Splice count
2
3 Trays
432 Max
Splice count
2 Trays
288 Max
Splice count
LITE-GRIP
Short Tray
(144 splice count)
Cat. # LGSTR144
(Mass Fusion/
Ribbon)
1
24 count Low Profile Tray (Cat. # 8003468) is available for COYOTE In-Line, COYOTE Terminal (Single Chamber), & COYOTE Terminal (Dual Chamber) closures. Tray Conversion Kit
(Cat. # 8003757) is required to use this tray in these closures.
2
The maximum splice count for the COYOTE Terminal (Dual Chamber) requires trays to be installed in both chambers of the closure.
3
Each tray (Cat. # LGSTS16) is provided with splice blocks to support 16 single fusion splices. Splice Block Kit (Cat. # LGSBS8-5) is required for each tray to achieve maximum
splice count.
4
Capacity may be limited by the maximum cable size through the entry ports. PN: 80061055
6 Trays - 1296 Max
PN: 80061056
6 Trays - 1296 Max
PN: 80061057
9 Trays - 1944 Max
PN: 80061055
6 Trays - 480 Max
1
PN: 80061056
6 Trays - 480 Max
1
PN: 80061057
9 Trays - 720 Max
1
PN: 80061055
6 Trays - 864 Max
PN: 80061056
6 Trays - 864 Max
PN: 80061057
9 Trays - 1296 Max
PN: 80061055
9 Trays - 324 Max
PN: 80061056
9 Trays - 324 Max
PN: 80061057
14 Trays - 504 Max
PN: 80061055
12 Trays - 432 Max
PN: 80061056
12 Trays - 432 Max
PN: 80061057
18 Trays - 648 Max
Long Trays and Closures
Long Splice
Trays &
Closures
6.5"x22"
COYOTE Dome
9.5"x28"
COYOTE Dome
6.5"x22"
COYOTE
8.5"x22"
COYOTE
6.5"x22"
COYOTE
Splice Case
8"x28"
COYOTE
Splice Case
9.5"x28"
COYOTE
Splice Case

6 Trays
216 Max
Splice count
6 Trays
216 Max
Splice count
11 Trays
396 Max
Splice count
6 Trays
216 Max
Splice count
9 Trays
324 Max
Splice count
13 Trays
468 Max
Splice count
Low Profile Tray
(36 splice count)
Cat. # 8001127
(w/ plastic splice
blocks)
or
80807769
(blank)
4 Trays
144 Max
Splice count
4 Trays
144 Max
Splice count
8 Trays
288 Max
Splice count
5 Trays
180 Max
Splice count
7 Trays
252 Max
Splice count
10 Trays
360 Max
Splice count
Standard Tray
(36 splice count)
Cat. # 80805514
(w/ elastomer splice
block),
80805110
(w/ rigid slots),
or
80805509
(blank)

3 Trays
432 Max
Splice count
2 Trays
288 Max
Splice count
4 Trays
576 Max
Splice count
2 Trays
288 Max
Splice count
5 Trays
720 Max
Splice count
6 Trays
864 Max
Splice count
Ribbon Tray
(144 splice count)
Cat. # 80805515
(w/ elastomer splice
blocks),
80805146
(w/ rigid slots)
, or
80805510
(blank)

3 Trays
240 Max
Splice count
1
Not Applicable
5 Trays
400 Max
Splice count
1
2 Trays
160 Max
Splice count
1
5 Trays
400 Max
Splice count
1
6 Trays
480 Max
Splice count
1
LITE-GRIP
�

Long Tray
1
(80 splice count)
Cat. # LGSTS40
(Single Fusion)
3 Trays
648 Max
Splice count
Not Applicable
5 Trays
1,080 Max
Splice count
2 Trays
432 Max
Splice count
5 Trays
1,080 Max
Splice count
6 Trays
1,296 Max
Splice count
LITE-GRIP
Long Tray
(216 splice count)
Cat. # LGSTR216
(Mass Fusion/
Ribbon)
1
Each tray (Cat. # LGSTS40) is provided with splice blocks to support 40 single fusion splices. Splice Block Kit (Cat. # LGSBS8-5) is required for each tray to achieve
maximum splice count.

Maximum splice capacities are calculated by multiplying the maximum tray quantity per closure by the maximum splice capacity per splice tray. Achieving the maximum splice
capacity for each closure may require adjustments to the volume of fiber stored within the fiber organizers. Contact a PLP representative to discuss the details of achieving the
maximum capacities for your installation. World Headquarters
660 Beta Drive
Cleveland, Ohio 44143
Mailing Address:
P.O. Box 91129
Cleveland, Ohio 44101
Telephone: 440.461.5200
Fax: 440.442.8816
Web Site: www.preformed.com
E-mail: inquiries@preformed.com
� 2008 Preformed Line Products
Printed in U.S.A.
CO-SS-1038-1
08-08-3M
Description
The COYOTE
�
Splice Tray with LITE-GRIP Technology
introduces a whole new concept in fiber optic splice
tray design. LITE-GRIP Technology is designed to
improve fiber management within the confines of the
splice tray by providing a superior method for securing
splice protectors, restraining fiber cable entering the
splice tray and organizing fiber. The unique component
design makes installation and adjustment easier
to manage, thus minimizing the potential for fiber
damage while reducing labor time and cost. In addition,
COYOTE Splice Trays with LITE-GRIP Technology are
specifically engineered to meet the challenging space
requirements of the next generation fiber networks by
permitting large bend radii in a small package.
LITE-GRIP Splice Trays Kits LITE-GRIP Retention Sleeves to secure fiber entering
the splice tray and allow for quick installation /
removal to adjust fiber position LITE-GRIP Retention Sleeves are designed to grip
buffer tubes, pigtails or transport tubing without over
compression during installation and eliminate the
need for tie wraps, reducing installation time Available in blue, orange or green colors in single or
multi hole designs LITE-GRIP Splice Blocks increase splice density
within LITE-GRIP Splice Trays LITE-GRIP Splice Blocks are produced with an
advanced grip material designed to prevent splice
movement during handling or vibration LITE-GRIP Splice Blocks are available to accept
single fusion, ribbon or mechanical splice protectors
and can be easily installed or removed LITE-GRIP Splice Blocks for Ribbon are sized
to accept PLC splitter components. Consult
you PLP representative for more details See the Splice Tray Capacity Tables for specific
LITE-GRIP Splice Tray part numbers All LITE-GRIP Splice Tray Kits are provided with
(2) 6 hole Retention Sleeves and (2) 1 Hole
Retention Sleeves The following quantities of LITE-GRIP Splice Blocks
are provided in each Splice Tray Kit:
- LGSTS16 (2) Splice Blocks to support up to
16 Single Fusion Splices
- LGSTS40 (5) Splice Blocks to support up to
40 Single Fusion Splices
- LGSTR144 (4) Splice Blocks to support up to
12 Mass Fusion Splices
- LGSTR216 (6) Splice Blocks to support up to
18 Mass Fusion Splices
LITE-GRIP Ribbon Managers Organizes ribbon fiber bundles within fiber
storage compartments Sized to accept a maximum of (12) 12 fiber ribbons Produced with a soft material to prevent compression
of ribbon fiber upon installation Available in two colors blue and orange
Express Fiber Storage Ring for
LITE-GRIP Splice Trays Snaps into either LITE-GRIP Splice Tray
(long or short) Designed to provide a protected area when your
application requires fiber from within the same buffer
tube to be expressed Provides the ability to splice and express fibers on a
single tray Allows you to take full advantage of every fiber within
your cable if your application requires Eliminates the need for a second tray to store
expressed raw fiber and isolates the expressed fiber
to prevent damage
PLP
�
Fiber Optic Products
LITE-GRIP
�
Technology Accessories
LITE-GRIP Accessories
Catalog
Number
Description
LGRS6-25B
6 Hole LITE-GRIP Retention
Sleeves (BLUE) 25 pcs
LGRS6-25OR
6