e
joined to the next length of casing normally.
51150251

Splice Kit, Female

2.75 QC Casing
Splice kits include a male or female coupling, self-tap-
ping screws, and vinyl tape. You will need a hacksaw,
drill, and screwdriver.
1. Cut off damaged casing. Remove burrs.
2. Slide the coupling onto the end of the casing. Align
grooves inside the coupling with casing grooves
inside the casing.
3. Drill holes in the casing using the pre-drilled holes on
the splice coupling as a guide.
4. Insert the self-tapping screws into the pre-drilled
holes and screw them into the casing.
5. Seal the joint with vinyl tape.
The casing section now has a good QC end and can be
joined to the next length of casing normally. 51150350

Splice Kit, Male

3.34 QC Casing
Splice kits include a male or female coupling, self-tap-
ping screws, and vinyl tape. You will need a hacksaw,
drill, and screwdriver.
1. Cut off damaged casing. Remove burrs.
2. Slide the coupling onto the end of the casing. Align
grooves inside the coupling with casing grooves
inside the casing.
3. Drill holes in the casing using the pre-drilled holes on
the splice coupling as a guide.
4. Insert the self-tapping screws into the pre-drilled
holes and screw them into the casing.
5. Seal the joint with vinyl tape.
6. The casing section now has a good QC end and can
be joined to the next length of casing normally.
51150351

Splice Kit, Female

3.34 QC Casing
Splice kits include a male or female coupling, self-tap-
ping screws, and vinyl tape. You will need a hacksaw,
drill, and screwdriver.
1. Cut off damaged casing. Remove burrs.
2. Slide the coupling onto the end of the casing. Align
grooves inside the coupling with casing grooves
inside the casing.
3. Drill holes in the casing using the pre-drilled holes on
the splice coupling as a guide.
4. Insert the self-tapping screws into the pre-drilled
holes and screw them into the casing.
5. Seal the joint with vinyl tape.
6. The casing section now has a good QC end and can
be joined to the next length of casing normally.