k> Below is a cache of http://dodssp.daps.dla.mil/dodiss/dec1_02.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Index of Specifications and Standards DEPARTMENT OF DEFENSE INDEX OF
SPECIFICATIONS AND STANDARDS



DODISS NOTICE



1 DEC 2002 / FOR PERIOD 15 NOV 2002 TO 30 NOV 2002 / VOL. 22/ NO. 02




ATTENTION

The DODISS NOTICE is published on the 1
st
and 15
th
of each month by the DODSSP. A
Portable Document Format (PDF) version is posted within two business days of publication
to our web site DODISS Notice page at:


http://dodssp.daps.mil/dodiss.htm



If you rely on the DoDISS Notice to keep you informed of the latest changes and or new
Standardization documents index in the DoDISS then we encourage you to register for
your Assist Online account (there is no charge for this). Once you have your account you
can take advantage of the Assist Alert Service. Simply establish your Assist Alert Portal
profile, for more information visit our Assist web site at:

http://astimage.daps.dla.mil










NOTE

We are currently adding to our database additional information and documents related
to International Standardization Documents. These documents listed in this notice have
either an indicator of N (new), or M (modified).
N indicates that this is a new document that has been entered to our database.
M indicates that a modification has taken place to our database. This could be a
revision to a document, a new amendment, a revised amendment or administrative
information.
ACTIVE SECTION
DODISS NOTICE
Last Action
DOCUMENT NUMBER
DOCUMENT TITLE
Distribution
FSC/Area
MCA
Prep. Acty
Date
M QPL-781-15
TERMINAL, WIRE ROPE, SWAGING
A
1560

GS5
20-NOV-02
M QPL-8878-10
TURNBUCKLES, POSITIVE SAFETYING
A
1560

GS5
20-NOV-02
M MIL-DTL-7567C
PARACHUTES, PERSONNEL, DETAIL MANUFACTURING INSTRUCTIONS FOR[CUST: GL AS 11]
A
1670

GL
30-OCT-02
M QPL-17901-35
BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED
A
3130

SH
22-NOV-02
M QPL-18375-7
WIRE, ROPE, FLEXIBLE, CORROSION-RESISTING, NONMAGNETIC, FOR AIRCRAFT CONTROL
A
4010

GS5
20-NOV-02
M QPL-83420-12
WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL
A
4010

GS5
20-NOV-02
M QPL-15581-34
LIFE PRESERVERS, CO2, INFLATABLE, POUCH TYPE
A
4220

SH
22-NOV-02
N
SAE-J24714
FLUID SYSTEMS-CONNECTOR TUBES-GENERAL SPECIFICATION AND PART STANDARD[CUST: AV SH 71]
[REVIEW: 99 AS CC FSS]
A
4810

SH
15-OCT-02
M A-A-2307A
FILE, HAND (AMERICAN PATTERN), ALUMINUM
A
5110
#
FSS
08-OCT-02
M A-A-2308A
FILE, HAND (AMERICAN PATTERN), BANDSAW BLUNT
A
5110
#
FSS
08-OCT-02
M A-A-2309A
FILE, HAND (AMERICAN PATTERN), CANTSAW
A
5110
#
FSS
08-OCT-02
M A-A-2310A
FILE, HAND (AMERICAN PATTERN), CROSSCUT
A
5110
#
FSS
08-OCT-02
M A-A-2311A
FILE, HAND (AMERICAN PATTERN), FLAT
A
5110
#
FSS
08-OCT-02
M A-A-2312A
FILE, HAND (AMERICAN PATTERN), HALF ROUND
A
5110
#
FSS
08-OCT-02
M A-A-2313A
FILE, HAND (AMERICAN PATTERN), REGULAR
A
5110
#
FSS
08-OCT-02
M A-A-2314A
FILE, HAND (AMERICAN PATTERN), KNIFE
A
5110
#
FSS
08-OCT-02
M A-A-3179A
SQUARES, MACHINISTS' COMBINATION
A
5210
#
FSS
17-SEP-02
M MS9952A(1) NOT 3
WASHER, CUP, LOCK - EXPANDER NUT CRES, AMS 5846[CUST: 11 IS]
A
5310

IS
18-NOV-02
N
ASTM-E1307
SHELTER PANELS, FLAT, SURFACE PREPARATION AND STRUCTURAL ADHESIVE BONDING OF PRECURED,
NONMETALLIC COMPOSITE FACINGS TO STRUCTURAL CORE FOR[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1555
SANDWICH PANEL REPAIR, STRUCTURAL PASTE ADHESIVE FOR[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1556
HONEYCOMB SANDWICH PANEL REPAIR, EPOXY RESIN SYSTEM FOR COMPOSITE SKIN[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1730
FOAM, RIGID, FOR USE IN STRUCTURAL SANDWICH PANEL CORES[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1749
WALL, RIGID, RELOCATABLE SHELTERS[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1793
ALLOY, ALUMINUM, FOR BONDING IN FOAM AND BEAM TYPE TRANSPORTABLE SHELTERS, PREPARATION
OF[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1794
FOAM CORED SANDWICH PANELS (200 DEG F ELEVATED HUMIDITY SERVICE), TYPE II PANELS,
ADHESIVE FOR BONDING[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1800
FOAM, BONDING, CORED SANDWICH PANELS (160 DEG. F ELEVATED HUMIDITY SERVICE), TYPE I
PANELS, ADHESIVE FOR[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1801
FACINGS, ALUMINUM, IN FOAM AND BEAM TYPE SHELTERS, ADHESIVE BONDING OF[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1826
ALLOYS, ALUMINUM, TO BE ADHESIVELY BONDED, LOW VOLATILE ORGANIC COMPOUND (VOC)
CORROSION-INHIBITING ADHESIVE PRIMER FOR[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1851
WALL RELOCATABLE STRUCTURES, DURABLE RIGID, ELECTROMAGETIC SHIELDING EFFECTIVENESS
OF[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1974
SHELTER, ELECTRICAL, EQUIPMENT S-250/G[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1975
SHELTER, ELECTRICAL, EQUIPMENT S-280/G[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1976
SHELTER, TACTICAL, NONEXPANDABLE[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1977
SHELTER, TACTICAL, EXPANDABLE, ONE-SIDE[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E1978
SHELTER, TACTICAL, EXPANDABLE, TWO-SIDE[CUST: GL]
A
5411

GL
21-JUN-02
N
ASTM-E2004
CLEAVAGE, FACING, OF SANDWICH PANELS[CUST: GL]
A
5411

GL
21-JUN-02
M QPL-39005-63
RESISTORS, FIXED, WIRE-WOUND (ACCURATE), NONESTABLISHED RELIABILITY, ESTABLISHED
RELIABILITY, GENERAL SPECIFICATION FOR
A
5905

CR
29-NOV-02
M MIL-PRF-39003J
CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY,
GENERAL SPECIFICATION FOR[CUST: CR EC 11 CC] [REVIEW: 19 99 AS MC OS SH]
A
5910

CC
18-NOV-02
M MIL-PRF-39022/11C(2)
CAPACITORS, FIXED, METALLIZED PLASTIC DIELECTRIC, DIRECT-CURRENT, HERMETICALLY SEALED,
STYLES CHR20, CHR21, CHR22, CHR23, CHR24, CHR25[CUST: CR EC CC]
A
5910

CC
15-NOV-02
M MIL-PRF-83421/1B(1)
CAPACITORS, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN
METAL CASES, ESTABLISHED RELIABILITY STYLES CRH01, CRH02, CRH03, CRH04, CRH05, CRH06,
CRH07, CRH08, CRH09, AND CRH00[CUST: CR EC 11 CC NA] [REVIEW: 19 AR AS MC OS SH]
A
5910

CC
15-NOV-02
M MIL-PRF-83421/6B(2)
CAPACITORS, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN
METAL CASES, ESTABLISHED RELIABILITY, STYLES CRH31, CRH32, CRH33, CRH34, AND CRH35[CUST:
CR EC 11 CC] [REVIEW: 19 AR AS MC OS SH]
A
5910

CC
15-NOV-02
M QPL-19978-66
CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC), DIELECTRIC (HERMETICALLY SEALED IN
METAL, CERAMIC, OR GLASS CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, GENERAL
SPECIFICATION FOR
A
5910

CC
29-NOV-02
M QPL-49137-32
CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED
AND METAL CASE WITH PLASTIC END FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
A
5910

CR
27-NOV-02
M QPL-49470-11
CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND
TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
A
5910

CR
19-NOV-02
M QPL-55681-113
CAPACITOR, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND
NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
A
5910

CR
13-NOV-02
M MIL-DTL-15743/1B
SWITCH, ROTARY, ENCLOSED, SUBMER