ary Power Outlet Panels
Earth Mount Pedestal, Unmetered Devices
FEATURES
í UL Listed
í Suitable for use as temporary
service as described in the 2002
National Electrical Code (NEC)
section 527.3
í Suitable for use as RV power supply
as described in the 2002 NEC
section 551-71,81,46.C
í Rainproof NEMA Type 3R
enclosure
í Powder coated, G90
galvanized steel
í Gray paint standard, other colors
available for orders over 75 pieces
í Pre-wired receptacles with
copper conductors
í Copper bus bars
í Loop feed lugs available on pedestal
devices only
í Lifetime warranty on Siemens
installed circuit breakers
í Impact resistant, thermoplastic
receptacles
í Surface mount, pedestal earth
mount, pedestal pad mount, and
back-to-back devices available
í Metered (ring and ringless styles)
and unmetered devices available
í Surface metered devices available in
top and bottom feed
í Stainless steel enclosure option
í Water, cable, and telephone options
available on pedestal devices
í Lighted option available on
all devices
í Non-stock items have 3 week
lead times
Online Selection & Application Guide available at:
www.sea.siemens.com/reselec.product/pop
Base of device
is to be buried in the ground Siemens Energy & Automation, Inc.
1-800-964-4114
3333 Old Milton Parkway
www.sea.siemens.com/reselec
Alpharetta, GA 30005
ˆ2002 Siemens Energy & Automation, Inc. All Rights Reserved.
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective companies. Specifications are subject to change
without notice.
Earth Mount Pedestal, Unmetered Devices
Dimensions (in inches)
STANDARD
LIGHTED
9.50
6.13
19.25
GRADE
64.30
9.50
6.13
19.25
71.50
GRADE
24.00
24.00 Catalog Numbering System
1
2
3
4
5
6
7
8
9
10
P
RECEPTACLE
RECEPTACLE
RECEPTACLE
METER
U= Unmetered
RT= Metered
Ringless
Type
(Meter at
top)
T= Metered
Ring Type
(Meter at
top)
RB= Metered
Ringless
Type
(Meter at
bottom)
B= Metered
Ring Type
(Meter at
bottom)
TYPE
S= Surface
P= Pedestal
(Earth
Mount)
M= Pedestal
(Pad
Mount)
2B= Pedestal
(Back-To--
Back, Earth
Mount)
2M=Pedestal
(Back-To-
Back, Pad
Mount)
X
Cable and
Telephone
L
Lighted
W
Water
K
Extra 1-Pole
Circuit
Breaker.
Provisions
RECEPTACLE CONFIGURATIONS
1
14 50R
125/250V
50A
1F
Designates GFCI Circuit
Breaker Protection
2
14 30R
125/250V
30A
2F
Designates GFCI Circuit
Breaker Protection
3
TT30R
125V
30A
3F
Designates GFCI Circuit
Breaker Protection
4
L6 30R
250V
30A
4F
Designates GFCI Circuit
Breaker Protection
5
6 20R
250V
20A
5F
Designates GFCI Circuit
Breaker Protection
6
L5 20R
125V
20A
7
5 20R2GFCI 125V
20A
8
5 20R2
125V
20A
8F
Designates GFCI Circuit
Breaker Protection
9
L5 30R
125V
30A
Up to three receptacles
may be ordered
for a total of
125 amps maximum
Required fields.
For use on pedestal devices.
All lighted devices require at least one QF120
circuit breaker.
Devices with only 1 or 2 outlets, or with 3 outlets
totaling less than 100 amps, have provisions for an
additional 1-pole circuit breaker.
EXAMPLE: Catalog No. P1F38FTPXL
Given specifications:
í 50A, 125/250V receptacle with GFCI circuit breaker
í 30A, 125V receptacle with a standard circuit breaker
í 20A, 125V receptacle with GFCI circuit breaker
í Ring type meter at the top
í Pedestal mount device
í Cable and telephone provisions
í Light option
Step 1
Start with the power receptacle product line prefix identifier: (P)
Step 2
Choose the first receptacle and its circuit breaker type: (1F)
Step 3
Choose the second receptacle and its circuit breaker type: (3)
Step 4
Choose the third receptacle and its circuit breaker type: (8F)
Step 5
Choose the utility grade meter type: (T)
Step 6
Choose the device mounting type: (P)
Step 7
We have a variety of options you can add to your panel, including cable and telephone,
and water. Add cable and telephone option here: (X)
Step 8
Add the light option here: (L)