COMPLETE DATA LINE SURGE PROTECTION

have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
COMPLETE DATA LINE SURGE PROTECTION
Series
Part Number
Application
Connector
CCP
The CCP Series of data communication line surge protectors will ensure the reliable operation of coaxial or twinaxial based
networked equipment running IBM 3270, AS400, Ethernet, ArcNet, Satellite/Cable/Closed Circuit TV and most other wideband,
communication interfaces.
CCP-2DA (EN)
Ethernet 10BASE 2 (ThinNet)
Coaxial
CCP-2DT (EN)
Ethernet 10BASE 2 (ThinNet) T Tap
Coaxial
CCP-2DA-N (EN) M/F
Ethernet 10BASE 5 (ThickNet)
Coaxial (also avail. F/F)
CCP-CCTV
Closed Circuit TV
Coaxial
CCP-FCT - M/F
Cable TV
Coaxial (also avail. F/F)
CCP-FST - M/F
Satellite TV
Coaxial (also avail. F/F)
DDP
The DDP Series of data communication line protectors will ensure the reliable operation of hubs, bridges, routers, switches and
other networked equipment running 10BASE T & 100 BASE T Ethernet, RS422, RS423, RS232, ArcNet, Token Ring, Analog
Dial Up, CSU/DSU, DDS, ISDN, T1 and most other communication environments.
DDP-H4-
*
See below for
*

RJ11 & RJ45 - 4 Ports
DDP-H8-
*
See below for
*

RJ11 & RJ45 - 8 Ports
DDP-H12-
*
See below for
* RJ11 & RJ45 - 12 Ports
DDP-25-
*
See below for
*
RJ21
MTJ
The MTJ Series of data communication line protectors for RJ45 and RJ11 interfaces will ensure the reliable operation of Local
and Wide Area Networks. We offer protection for LAN interface technologies such as Ethernet 10BASE T & 100BASE T, CDDI,
100VG-AnyLan and ATM155. For WAN and Telco applications we offer protection for environments including ISDN, T1, FT1,
DDS, analog dial up modems, faxes and more.
MTJ-02
*
/RJ11
See below for
* RJ11 (2 Wire)
MTJ-04
*
/RJ11
See below for
* RJ11 (4 Wire)
MTJ-06
*
/RJ11
See below for
* RJ11 (6 Wire)
MTJ-04
*
/RJ45
See below for
* RJ45 (4 Wire)
MTJ-08
*
/RJ45
See below for
* RJ45 (8 Wire)
PCH
The Category 5 PCH Series 24-Port Protected Patch Panel helps ensure the reliable operation of networked equipment using
100BASE T, ATM155, CDDI and other 100Mhz applications where system availability is absolutely critical.
PCH12-C5
Rack Mount - 100BASE T, ATM155, CDDI& 100mHz
CAT5 110/RJ45 - 12 Ports
PCH24-C5
Rack Mount - 100BASE T, ATM155, CDDI& 100mHz
CAT5 110/RJ45 - 24 Ports
PCH48-C5
Rack Mount - 100BASE T, ATM155, CDDI& 100mHz
CAT5 110/RJ45 - 48 Ports
RAK
The RAK Series of Rack Mount and Wall Mount Standoff protectors will ensure the reliable operation of networked equipment
connected to 10BASE T & 100BASE T Ethernet, ATM155, CDDI, 100VG-AnyLan, RS422, RS232, Token Ring, Lease Line, ISDN,
T1, DDS, Dial-Up and most other communication interfaces.
RAK16-
*
Rack Mount - See below for
* RJ11 & RJ45 - 16 Port
RAK16-
*
/SO
Rack Mount - See below for
* RJ11 & RJ45 - 16 Port w/so
RAK32-
*
/SO
Rack Mount - See below for
* RJ11 & RJ45 - 32 Port w/so
SIP
The SIP Series of Subminiature D Interface Protectors will ensure the reliable operation of parallel and serial devices such as
printers and external modems, point-of-sale terminals, mainframes, dumb terminals and most other devices using subminiature
D or Centronics connectors, which are sensitive to destructive transient energies. Standard applications include Ethernet, Token
Ring, RS232, RS422 and LAN/WAN interfaces. Special applications can be accommodated through our Custom Products Group.
DB9-RS232
RS232 (also available for RS422 & Token Ring)
DB9
DB15-RS232
RS232 (also available for RS422 & Ethernet AUI)
DB15
DB25-RS232
RS232 (also available for RS422 & Parallel)
DB25 (RS232 also available in 4 & 8 wire)
DB25M/-RJ45-
*
DB25 Adapter - See below for
* DB25 Male to RJ45 Adapter
DB25F/R-RJ45-
*
DB25 Adapter - See below for
* DB25 Female to RJ45 Adapter
TSP
The TSP Series of Terminal Strip Protectors will ensure the reliable operation of networked equipment connected to Token Ring,
RS422, RS232, Short Haul Modems, Muxes, DDS, Analog Dial Up, ISDN, T1 and most other communication interfaces.
TSP-2B-
*
See below for
* Hard-Wire (2 Wire)
Also available in 4,6,8, 10 and 32 Wire
Additional
The USB Protector has been designed to address the protection needs of Universal Serial Bus ports. The compact, easy-to-install
Products
design offers plug and play capability while advanced, silicon avalanche diode technology provides protection from surge
energies, electrostatic discharge and noise components. These fully shielded, high-speed, high energy, self-resetting devices
offer mission-critical reliability in the protection of workstations, printers, scanners, digital telco equipment, and a host of other
peripherals using either type A or type B connectivity. The PCMCIA and CATV products incorporate a ground pin for
convenient use on AC outlets instead of the traditional green ground wire on other lines.
USB-A
Universal Serial Bus
Type A
USB-B
Universal Serial Bus
Type B
CATV
Cable TV
Coaxial using AC outlet ground
PCMCIA
Laptop Modem Protector
RJ11 using AC outlet ground
2641 Townsgate Road, Suite 600, Westlake Village, CA 91361-2726
(805) 379-3155 (800) 877-3735 FAX (805) 379-4551 www.cylix.com
SPECIFICATIONS
*
Protectors are available for RS232, RS422, RS423, RS485, RS530, Ethernet, ArcNet, Token Ring, Analog and
Digital Telco and most other applications (see series specification sheet or ask one of our staff for details.)
PLEASE NOTE: In addition to protection for standard applications, Cylix offers custom
products and engineering services to address unique application problems.
COMPLETE DATA LINE
SURGE PROTECTION APPLICATIONS
WHY DO YOU NEED DATA LINE SURGE PROTECTION?
As new technologies drive more sophisticated applications into the marketplace, it is clear that protecting data and telecommunication equipment
through the use of Data Line Surge Protectors (DLSPs) is now more important than ever.
DLSPs are, in essence, high speed, self resetting switches designed to balance communication lines with chassis (earth) ground in the event the lines
become over energized.
WHERE DO SURGE ENERGIES COME FROM?
Destructive surge energies occur as a result of ground potential differences. Some typical examples are nearby lightning strikes, ESD (electrostatic
discharge), EMI (electro magnetic interference), RFI (radio frequency interference), and induced over-voltages caused by copy machines, fluorescent
lighting and even AC power protectors.
Example: A power line surge is clamped by the AC power protector to chassis (earth) ground. The surge energy seeks earth ground through any
and all paths. The data cable is a path. The surge energy seeks earth ground through the data cable, damaging or destroying motherboards,
modems, serial ports, parallel ports, network interface cards and any other LAN equipment in its path.
THE CYLIX DATA LINE SURGE PROTECTION DIFFERENCE
Since 1984, The Cylix Corporation has been dedicated exclusively to the development of effective data line surge protection. This dedication has
resulted in the industry's most comprehensive family of data line surge protection products and the positioning of Cylix as the gold standard in
today's communication protection marketplace.
All Cylix products are manufactured in the USA and tested in-house to meet or exceed UL 497 specifications.
Easy-to-install, in-line surge protection products are designed to protect data and telecommunication lines for virtually any type of network or
system including Ethernet, ArcNet, Token Ring, RS232, RS422, Satellite, CATV, CCTV, DDS, T1 AND ISDN applications.
Our custom products group specializes in tailor made devices to address unique protection problems for non-standard, mission-critical environments.
Our Circle of Protection Product Warranty and Guarantee includes a Limited Lifetime Warranty, Five Year Replacement Warranty and
$25,000 Connected Equipment Guarantee.
TYPICAL STAND-ALONE OFFICE ENVIRONMENT USING CYLIX DATA LINE
SURGE PROTECTORS TO INSURE INVESTMENT AND GUARANTEE PRODUCTIVITY.
CYLIX DATA LINE SURGE PROTECTORS SAFEGUARDING A POINT OF SALE NETWORK
WITH LOCAL AND CORPORATE DATABASE SYNCHRONIZATION VIA SATELLITE.
This product should be used as secondary surge protection at the
equipment level, behind a primary protection environment.
MAJOR UNIVERSITY DEPLOYMENT OF CYLIX DATA LINE
SURGE PROTECTION DEVICES IN CROSS CAMPUS INSTALLATION.