color=black>Yahoo! is not affiliated with the authors of this page or responsible for its content.
IR DAY&NIGHT VANDAL RESISTANT DOME CAMERA
SCC-B9374
operating instructions
IR DAY&NIGHT VANDAL
RESISTANT DOME CAMERA
imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
ENG
FRA
SPA
JAP
01-SCC_B9374_NA-ENG.indd 1
2008-01-28 2:27:52 safety precautions
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS
INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates that dangerous voltage consisting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
If this power supply is used at 240V ac, a suitable plug adapter should be used.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.

Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion,

fire, electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may

cause abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. Insecure connection may

cause fire.
5. When installing the camera, fasten it securely and firmly. A falling camera may cause

personal injury.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or

containers filled with water on top of the camera.

Doing so may cause personal injury due to fire, electric shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations.

Doing so may cause fire or electric shock.
8. If any unusual smells or smoke come from the unit, stop using the product.

In such case, immediately disconnect the power source and contact the service

center. Continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center.

Never disassemble or modify this product in any way. (SAMSUNG is not liable for

problems caused by unauthorized modifications or attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product.

Doing so may cause fire or electric shock. 01-SCC_B9374_NA-ENG.indd 2
2008-01-28 2:27:52 CAUTION
1. Do not drop objects on the product or apply strong shock to it.
Keep away from a location subject to excessive vibration or magnetic interference.
2. Do not install in a location subject to high temperature (over 122°F, 50°C), low
temperature (below 14°F, -10°C), or high humidity. Doing so may cause fire or
electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power
and then move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning.
Neglecting to do so may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun,
as this may damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any
time.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian interference-Causing Equipment
Regulations of ICES-003.
01-SCC_B9374_NA-ENG.indd 3
2008-01-28 2:27:53 important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.

Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,

or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus.
13. Unplug this apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus
01-SCC_B9374_NA-ENG.indd 4
2008-01-28 2:27:53 _01
contents

FEATURES
02
02
Features
THINGS TO KEEP IN MIND
DURING INSTALLATION
AND USE
02
02
Things to keep in mind during installation and
use
CAMERA ASSEMBLY &
MOUNT
05
05
Camera assembly & mount
TROUBLESHOOTING
06
06
Troubleshooting
SPECIFICATIONS
07
07
Specifications
contents
DIMENSIONS &
CABLE CONNECTION
03
03
Dimensions & cable connection
03
Auto iris lens & dip switch settings
04
3-Axis gimbal adjustments
01-SCC_B9374_NA-ENG.indd 1
2008-01-28 2:27:53 02_
features

SONY 1/3 Super HAD Color CCD
Resolution: 540TVL (Color) , 570TVL (B/W)

Day/Night Filter Change and Vari-Focal Aspherical DC
Auto Iris 3.8~9.5mm F1.2 Lens Built-in
Color & B/W Auto Switchable by photocell and sensitivity

DIP Switch control of Day & Night time delay, Flickerless, BLC and White
Balance
DC Iris Control Level Volume Built-in
CDS Auto Switching IR-LED Control (18pcs LEDs)
True 3-Axis Gimbal Bracket (2-Pan, 2-Tilt)
Vandal Resistant & Waterproof Outdoor Installation (IP-66)
AC24V / DC12V Dual Voltage Available
things to keep in mind during
installation and use
Do not disassemble the camera on your own.

Always be careful when handling the camera. Do not strike the camera by your
fists or shake it. Please be careful not to be careless when storing and operat-
ing it.

Do not place or operate the camera in any wet environment such as rain or
wet surfaces.

Do not clean the camera with rough sandpaper. Please always use a dry cloth
when cleaning it.

Put the camera in a cool area free from direct sunlight. Otherwise, the camera
may be damaged.











features
01-SCC_B9374_NA-ENG.indd 2
2008-01-28 2:27:53 _03
ENG
dimensions & cable connection
dimensions & cable connection
AUTO IRIS LENS & DIP SWITCH SETTINGS
No.
Function
Dip Switch Setting
ON
OFF
1
Time Delay
2~3sec.
4~5sec.
2
Flickerless
OFF
ON
3
BLC
ON
OFF
4
ATW/AWC
ATW
AWC
01-SCC_B9374_NA-ENG.indd 3
2008-01-28 2:27:55 04_ dimensions & cable connection
3-AXIS GIMBAL ADJUSTMENTS
01-SCC_B9374_NA-ENG.indd 4
2008-01-28 2:27:56 _05
ENG
camera assembly & mount
1. Dome Base Mounting
- Remove the protecting sheet from the rubber bottom and attach it on the base housing.
- Fix the base housing with the supplied 4pcs of screws(No. 8-32 UNC) on the ceiling or wall.
2