Help for Webmasters « back to results for ""
Below is a cache of http://www.oil.gov.iq/tender/dura-3615.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
MIDLAND REFINERIES CO. ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELLOW:- REQ.NO. DESCRIPTION QTY. MIDLAND REFINERIES CO. ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED
BELLOW:-
REQ.NO.
DESCRIPTION

QTY.
PRICE/ ID
DINAR
BID
BOND/$
3615/2008
FIRE FIGHTING VEHICLE

6 NOS
150000

18000
:
NOTE
1. THE REQ. TO BE SOLD IN IRAQI DINAR, UN RETURNABLE.
2. PRICES (OFFERS) TO BE SUBMITTED IN US DOLLAR CIP BAGHDAD (DAURA
REFINERY).
3. CLOSED (TECHNICAL & COMMERICAL OFFERS TO BE SUBMITTED SEPARATELY).
4. THE OFFERS MUST BE SUBMITTED BY (DHL) & ALL THE OFFERS THAT SEND BY
E-MAIL WILL BE REFUSED.
5. ALL DOCUMENTS (PROFILE) MUST BE SUBMITTED BEFORE PURCHASING THE
REQ. OR ENCLOSE WITH THE TECHNICAL OFFER OTHER WISE THE OFFER WILL
BE REFUESED.
6. TERMS OF PAYMENT IS L/C TO BE PAID 100% AFTER THE RECEIPT OF GOODS IN
BAGHDAD COMPLETE AND AS ORDER.
7. AN UNCONDITIONAL PERFORMANCE BOND OF 5% OF TOTAL AMOUNT OF THE L/C
TO BE SUBMITTED BEFORE OPENING OF THE L/C IN FAVOUR OF (MIDLAND
REFINERIES CO.) TO BE REALEASED AFTER THE RECEIPT OF GOODS COMPLETE
AND AS ORDERED.
8. 1% OF TOTAL VALUE DELAY PENALTY SHOULD BE APPLIED FOR EACH WEEK
DELAY.
9. 3% FROM TOTAL VALUE OF THE PURCHASE ORDER FOR IRAQI COMPANIES
ALSO INCASE THE PAYMENT OF PAYABLE IN IRAQI DINAR TO BE DEDUCTED AS
TAXES & NOT RELEASE UNLESS WE GET APPROVAL ISSUED FROM OUR TAXES
OFFICE.
10. 0.002 FROM TOTAL VALUE OF L/C TO BE DEDUCTED AS STAMP CHAGE.
11. THE BID BOND SHOULD BE SUBMITTED AS MENTIONED ABOVE EN CLOSE WITH
A TECHNICAL OFFER AS LETTER OF GUARANTEE OR CERTIFIED HEQUE OR
BANK GUARANTEE ISSUED FROM ANY IRAQI BANK RELEASED IMMEDIATELY IN
CASE THE REQUEST IN NOT AWARDED TO THE COMPANY.
12. CLOSING DATE IS- /9/2008 TILL (12:00) O, CLOCK (NOON).

D.Y. AL-KASHAB
G.MANAGER




















REQ NO. : 3615 / 2008
FIRE FIGHTING VEHICLE
SERVICE AND SUPPLEMENTRAY FIRE FIGHTING
VEHICLE QTY:6

A-VEHICLE SPECIFICATION
The vehicle to be up to date model
1.
single cabinet for three men (1driver + 2 seats )
2.
loading capacity 2 tons (min)
3.
4-stroke diesel engine of (4) or (6) cylinder. Direct injection fuel
system
4.
power :120-160 HP
5.
drive: 4 WD DUAL REAR WHEEL /TOWING HOCK AT REAR
6.
tyre : 700 R 15 OR 750 R 16
7.
cooling :tropical water cooled
8.
steering :hydraulic power steering
9.
exhausting : exhaust with spark arrester
10.
transmission : manual with 5 speed
11.
battery : 12 V 90 AH


B-VEHICLE ACCESSORIES
1.
spare tyre with wheel
2.
hydraulic jack and standard tool set kit
3.
first aid kit
4.
spare part catalogue and shop manual for operating and
maintenance
C-
HYDRAULIC CRANE SPESIFICATION

1.
mounted at the rear of driver cabinet
2.
the two outriggers are automatic hydraulically operated by
hydraulic pump
3.
boom length 6 m max (out reach)
4.
boom lifting capacity at max out reach 500 KG
5.
the boom provided by lifting hock
6.
the turntable ability 180 DG to prevent turn above driver
cabinet
7.
provided by control panel fixed in box and suitable place and
consist of :
control lever for hydraulically operated for horizontal
movement of left outrigger
control lever for hydraulically operated for horizontal
movement of right outrigger
control lever for hydraulically operated for vertical
movement of left outrigger control lever for hydraulically operated for vertical
movement of right outrigger
main electrical power (on) button
signal light illuminates when the left outrigger are in
their position (fully extended)
signal light illuminates when the right outrigger are in
their position (fully extended)
Automatic leveling device with clinometer of center
point
Push button for signal horn

8.
provided by portable control panel in box and 15 m cable
consist of:
push button for signal horn
control lever for hydraulically elevating and lowering of
boom
control lever for hydraulically raising and lowering the
second boom
control lever for hydraulically rotation movement

9.
the crane provided with limit switches for each movement to
operate the crane in safe condition
10.

one project light on hydraulic crane

D-CAB AND BODY
Body is open lick pick-up and with slid able sides of 500 mm
high

E-PAINTING

Cab and body are painted red

F-ACCESSORES AND EQUPMENTS WHICH IS FIXED













IN CAB :
for each one
1.
two projection light
2.
two red emergency flashing beam light
3.
one electronic two ton siren
4.
two portable dry powder fire extinguisher size 12 kg
5.
five fire men helmet with face protection shield
G-EXTRA ACCESSORES ARE NOT FIXED
for each one
1.
ten overall service suit (one piece)
2.
ten fire fighter protective jackets (orange)
3.
two set of small compact vehicle washing machine
working by 220 v motor
4.
two air compressor (150 psi ) for vehicle tyers working
by 12 v motor
5.
two heavy duty tool box 250 piece
6.
two electric power (220 v) decanting pump with
immersion tube of 70 cm
7.
one set of blow man ( air blower ) with 1" flexible air
hose length 25 m and face mask .the blower working
by 12 v motor/ anther one same specification working
by 220 v
8.
twenty roller fire (flame proof ) blanket stored in
suitable wall case
9.
two portable water shower made of flexible hoses and
nozzles working by fire water , fixed in suitable bag
(box)
10.
one electrically operated mobile greaser suitable to
containing 10-12 kg of bluk grease complete with
hose , lubricator , control valve
11.
two compact design electric generator 220 v and 2
KVA with projection light portable with 15 m cable
12.
two compressed air breathing apparatus
13.
two set of two speed impact drill 220 v with concrete
drill bit set
14.
two angle grander input 2300 w with set of grinder
disk
15.
one reciprocating saw hilti stork rate 1200-2600
strokes/min
16.
ten safety portable and rechargeable searchlight with
recharging unit
17.
two 220 AC to DC electric welding machine with
accessories






H-TO SEND SPARE PARTS LIST FOR THE
HYDRAULIC CRANE AND TO BE INCLUDING
THE FOLLOWING ITEMS :
for each one

1. main hydraulic pump 2
2.
o-ring and washer for main boom 3 set
3.
o-ring for piston of the main boom 3 set
4.
o-ring for each stage (up to boom movement) 3 set
5.
o-ring for the complete set for each piston of the
riggers 3 set
6.
complete pump assembly 1
7.
complete set of filters for each
(gas,oil,hydraulic,air) system ( 10 pieces for
each)
8.
belts for main engine and hydraulic system (three
set each)

I-

SPARE PART LIST FOR CHASSIS
for each one
1.
starter 1
2.
alternator 1
3.
alternator belt 5
4.
master cylinder clutch 1
5.
master cylinder clutch kit 2
6.
master cylinder clutch brake 1
7.
disk clutch 3
8.
release bering clutch 3
9.
set of nozzle 2 set
10.
solenoid valve of the injection pump 2
11.
starter solenoid 1
12.
gasket cylinder head 6
13.
set of relags & fuses 2
14.
generator 24 v 2
15.
switch for control panel 2 set
16.
warning light cema 5