simplifying gain and frequency setup
procedure.
The new discrete circuit topology is optimized for
improved signal to noise ratio and tempco, while
maintaining form, fit and function backward
compatibility with previous versions.
Schaevitz
®
Sensors
FEATURES Small OEM Form Factor Low Cost Six DIP Switch Selectable Gains 20-Turn Zero and Span Pots 100% Zero Suppression Card-Edge or Screw Termination Master / Slave Capability
APPLICATIONS Position Feedback System Test & Measurement High Density Dimensional
Gaging
LVDT Voltage Module
The LVM-110 Module
s p e c i f i c a t i o n s
Power Supply Requirements:
Voltage
±15 Vdc. ±10% (for ±10 Vdc output)
±12 to ±15Vdc. ±10% (for ±5 Vdc. Output)
Current
30mA. (max)
Transducer Excitation:
Voltage
3.0 V-rms. ± 10%
Current
20 mA
(min LVDT Input impedance 150 )
Frequency
2.5, 5, 8 & 10 kHz
Position Signal:
±10, ±5, 0 to 10 and 0 to 5 Vdc
(5 mA max current)
Required Signal for ± 10Vdc Output
Minimum
100 mV rms.
Maximum
5.6 V rms.
Frequency Response
250 Hz (-3db)
Linearity
.05%
Tempco
< .02%/° F
Zero Suppression
± 6 Vdc
Output Impedance
<1
Noise and Ripple
15 mV rms
Stability
.05% of FSO
(after 15 min. warm-up)
www.msisensors.com
Tel: 1-757-766-1500
North America Toll Free: 1-800-745-8008
Fax: 1-757-766-4297
RevA 1/3/06
- 1 - Schaevitz
®
Sensors
LVDT Voltage Module


- 2 -
www.msisensors.com
Tel: 1-757-766-1500
North America Toll Free: 1-800-745-8008
Fax: 1-757-766-4297
w i r i n g d i a g r a m