ll years on parts
Hi-glow Fiber Logs & Embers
1400 Degree Ceramic Glass
Tuscany Rheostat and Snap Disc
The rheostat and snap disc features
allow you to adjust your optional
variable fans to the speed you favor.
The temperature sensing
snap disc automatically
turn your fans on and
off when
your Blaze
King ®
is being
used.
The superior design and engineering
embodied in the Tuscany produces a
supremely clean burning and attractive
direct vent appliance. It is suited to
even the most difficult installations,
including high altitude applications.

With a simple installation of approved
venting, you can safely burn either liquid
propane or natural gas. The sliding
aeration adjustment can even be done
while the unit is hot, making fine tuning
a snap! Approved for use in any home,
including mobile home applications.
Refer to Owners & Operators Manual
Prior To Installation. This appliance
must be properly connected to a
venting system in accordance with
manufacturers installation instructions.
Fan Assembly
This is a fan assembly. There are
many types used, but all essentially do
the same thing, help to move hot air
around your home. Blaze King ® gas
appliance fans are covered for
a full five years, parts
Gas Valve
This is a gas
valve. It regulates
the gas flow to your
appliance. When you
purchase a Blaze King ®
gas appliance, the valve &
labor are both covered for a full
5 years.
Thermocouple or
Thermopile
This is a thermo-
couple or thermo-
pile. Gas units
have one or both.
When the flame from
the pilot makes
contact with this
essential part, gas continues to flow
through the valve. The full-five year
warranty from Blaze King ® covers
the little parts as well!
Snorkel
When installing the
Tuscany rear vent,
a minimum 14
Simpson DuraVent®
or Selkirk Direct-
Temp snorkel must
be used. For detailed
installation instruc-
tions, please refer
to the Owners &
Operators Manual.
Blaze King
®
Industries
www.blazeking.com Tuscany
2'' min. to
combustibles
min. to
combustibles
4 19

3
/
4 min. to
combustibles
29
1
/
4 29
11 Clearances And Specifications
Blaze King
®
Industries
www.blazeking.com
Your Authorized Dealer:
Performance
Natural Propane

Gas
Gas
27,000 27,000
Max. Input btu/hr
21,800 22,100
Max. Output btu/hr
81%
82%
Steady State Efficiency
18,000 18,000
Min. Input btu/hr
The Blaze King Tuscany is listed and cer-
tified for installation in the U.S.A. and
Canada under the following standards:
ANSI Z21.88b-1999/CSA 2.33b-M99
Vented Gas Fireplace Heater CAN/CGA-
2.17-M91 Gas Fired Appliances for Use
at High Altitude; CSA-P.4.1-02. This
appliance may be installed in a manufac-
tured home (U.S.A. only). Mobile home
installations (USA and CANADA) must
be done in accordance with the manufac-
turers instructions and the manufactured
home construction and safety standard,
Title 24 CFR, Part 3280 or Standard for
Installations in Mobile Homes, CAN/CSA
Z240 MH. This appliance is for use only
with the type(s) of gas indicated on the
rating plate. Research and development
laboratory tested for steady state efficiency
(NG 81% and LP 82%).
Specifications
27
1
/
2
/699mm width
(at
legs)
29/737mm height
24/610mm depth
4x6/102x153mm flue
diameter
265# / 121 kg
shipping weight
Clearance to Combustibles
4/100mm rear
10
1
/
2
/266mm side
2/50mm corner
Alcove
A. 11/275mm
side wall to unit side
B. 4/100mm
back wall to unit back
C. 14/700mm
wall to vent center
D. 2/50mm
corner to side wall
46/1150mm min.
alcove
height
NOTICE: Improper installation of your gas appliance or failure to operate it accord-
ing to the guidelines detailed in the owners manual, may negate your warranty
and endanger your home or family. Contact local building or fire officials about
restrictions and installation requirements in your area. Photos and illustrations are
for descriptive purposes only. Changes dictated by the manufacturers continuing
design improvement programs may not be shown. These products are covered by
one or more patents in the United States, Canadian and other countries. All Blaze
King® Industries products are manufactured under license agreement from: Blaze
King® Industries, 146 A Street Walla Walla, WA. 99362 and in Canada by Valley
Comfort Systems Inc. 1290 Commercial Way, Penticton BC V2A3H5. Design and
specifications subject to change without notice.
08/06 CP72138 2.5M
Canadian P.4 Efficiencies
Model %
6003T - Top Vent
56.3%
6003T - Rear Vent
62.8%