Display Items
Clock (Clock indication) etc. (Audio mode, FADER, BALANCE, etc. indications) Operation status indication Titles, PS names, PTYs, Clock, etc. are displays. Preset channel indication (1 to 6) Disc number indication (1 to 12) SIRIUS indication English Stereo indication Loudness indication : BEQ indication (BEQ:Beat EQ) : Professional mode indication : VSE indication (VSE:Virtual Space Enhancer) : Parametric egualizer indication : STD mode indication (STD:Standard) : DSF indication (DSF:Digital Sound Field) : Graphic egualizer indication : Disc indication : Scan indication : Repeat indication : Random indication Function mode indication · The names of modes being selected, etc. are displayed. : DAB indication · A Digital Radio (DAB) program can be received only in Canada. : Alternative frequency indication : Traffic announcement indication : Traffic programme indication : Programme type indication : Infomation indication : Manual indication LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. DXZ725 9 5. REMOTE CONTROL
Receiver for remote control unit English Operating range: 30° in all directions Signal transmitter Remote control unit
[FUNC] [ [ ],[ ] ] [ ],[ ] [BAND] [ISR] [MUTE] [SCN] [RPT] [DISP] [RDM] Inserting the Batteries
1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
AA (SUM-3, IECR-6/1.5V) Batteries Notes: Using batteries improperly can cause them to explode. Take note of the following points: · When replacing batteries, replace both batteries with new ones. · Do not short-circuit, disassemble or heat batteries. · Do not dispose of batteries into fire or flames. · Dispose of spent batteries properly. Rear cover Rear side 10 DXZ725 Functions of Remote Control Unit Buttons
Mode Button
[FUNC] [BAND] English Radio (DAB) CD CD/MD changer DVD changer TV Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and AUX. Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ [ ],[ ],[ ] ] Increases and decreases volume (in all modes). Moves preset channels up and down. No function. Turns mute on and off. Recalls ISR radio station in memory. Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only). TA on and off(DAB mode) Switches among main display, clock display. Preset scan. When pressed and held for 2 seconds: Auto store. Scan play. Scan play. When pressed and held for 1 second: Disc scan play. Preset scan. When pressed and held for 2 seconds: Auto store. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. Switches between playback and pause. Moves preset channels up and down. No function. [ ] [MUTE] [ISR] [DISP] [SCN] [RPT] AF function on and off. (DAB mode) Repeat play. Repeat play. When pressed and held for 1 second: Disc repeat play. No function. [RDM] PTY standby mode on and off.(DAB mode) Random play. Random play. When pressed and held for 1 second: Disc random play. Switches between TV and VTR. Some of the corresponding buttons on the main unit and remote control unit have different functions. A Digital Radio (DAB) program can be received only in Canada. DXZ725 11 6. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. English Attaching the DCP
1. Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit. Removing the DCP
1. With the MOTORIZED FACE closed, turn off the power. 2. Press the [RELEASE] button to open the DCP.
[RELEASE] button 2. Press the left side C of the DCP carefully to fit it in place. 3. Pull the DCP toward you and remove it. CAUTION
· Be sure to follow the procedures described in the section "Attaching the DCP" when installing the DCP. · The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks. · If the [RELEASE] button is pressed and the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either install it on the unit or put it in its DCP case. · The connector connecting the unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.
Note: · If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. DCP CAUTION
· Always close the MOTORIZED FACE before removing the DCP. · If you remove the DCP with the MOTORIZED FACE open, the sloping console closes immediately. Be careful not to get your fingers caught. 12 DXZ725 7. OPERATIONS
Basic Operations
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Note:Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). English Adjusting the volume
1. Press the front part of the knob to adjust. The knob will pop up. 2. Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.
The volume level is from 0 (minimum) to 33 (maximum). Turning on/off the power
Note: · Be careful about using this unit for a long time without running the engine. If you drain the car's battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [FNC] button. Switching the display
Press the [D] button to select the desired display. Each time you press the [D] button, the display switches in the following order: Main display 2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode. 3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit. Note: · System check The first time this unit is turned on after the wire connections are completed, it must check what equipment is connected. When the power is turned on, "SYSTEM CHCK" and "PUSH POWER" appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, the power is turned off, so press the [FNC] button again. Clock display Main display
Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function's display, then revert back to the preferred display several seconds after the adjustment. When you have entered a title in a CD/MD, it appears in the main display. If you have not entered a title, "D NO-TITLE" or "T NOTITLE" appears in the title display instead. For information on how to enter a title, refer to the subsection "Entering titles" in section "Operations Common to Each Mode ". Selecting a mode
1. Press the [FNC] button to change the operation mode. 2. Each time you press the [FNC] button, the operation mode changes in the following order: Radio mode § DAB mode § SIRIUS mode § CD mode § DVD deck mode § CD changer mode § MD changer mode § DVD changer mode § TV mode § AUX mode § Radio mode...
External equipment not connected with CeNET is not displayed. A Digital Radio (DAB) program can be received only in Canada. The SIRIUS mode can be also switched using the [SAT] button. DXZ725 13 Basic Operations English Setting the Beat EQ
This unit are provided with 5 types of sound tone effects stored in memory. Select the one you prefer.
The factory default setting is "USER CUSTOM". Adjusting the non fader output volume
You can adjust the volume output from the unit's non fader output terminal. 1. Press the [A] button and select "NON-FAD VOL". 2. Turning the [ROTARY] knob clockwise increases the output volume; turning it counterclockwise decreases the output volume.
The factory default setting is "0". (Setting range: ­6 to 6) Each time you press the [BEQ] button, the tone effect changes in the following order: "BASS BOOST" § "IMPACT" § "EXCITE" § "USER CUSTOM" § "TONE BYPASS" § "BASS BOOST" ... · BASS BOOST : bass emphasized · IMPACT : bass and treble emphasized · EXCITE : bass and treble emphasized mid de-emphasized · USER CUSTOM : user custom · TONE BYPASS : no sound effect 3. When the adjustment is complete, press the [A] button several times until the function mode is reached. Adjusting the bass
The bass gain, bass F (center frequency) and bass Q can be adjusted as follows. 1. Press the [A] button and select "BASS ". 2. Press the [a] or [d] button and select from "BASS " § "BASS " § "BASS " § "BASS ". 3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain, the F (center frequency) and the Q. BASS GAIN : ­6 to 8 (The factory default setting is "0") BASS F : 50Hz/80Hz/120Hz (The factory default setting is "50") BASS Q : 1/1.25/1.5/2 (The factory default setting is "1") 4. When the adjustment is complete, press the [A] button several times until the function mode is reached. Adjusting the tone
Press the [A] button and select the item to adjust. Each time you press the [A] button, the item changes in the following order: qWhen "BASS BOOST" is set "NON-FAD VOL" § "BASS BOOST" § "BALANCE" § "FADER" § Last function mode. qWhen "IMPACT" is set "NON-FAD VOL" § "IMPACT" § "BALANCE" § "FADER" § Last function mode. qWhen "EXCITE" is set "NON-FAD VOL" § "EXCITE" § "BALANCE" § "FADER" § Last function mode. qWhen "USER CUSTOM" is set "NON-FAD VOL" § "BASS " § "MID " § "TREB" § "BALANCE" § "FADER" § Last function mode. qWhen "TONE BYPASS" is set "NON-FAD VOL" § "BALANCE" § "FADER" § Last function mode.
Pressing the [BEQ] button for 1 second or longer while in "USER CUSTOM" sets flat, and displays a "BEQ FLAT" message. Note: · When the separately-sold digital sound processor (DPH910) is used, the bass and treble tone adjustments cannot be made. To adjust the tone, refer to the section "DSP Operations". Adjusting the MID
The MID gain, MID F (center frequency) and MID Q can be adjusted as follows. 1. Press the [A] button and select "MID ". 2. Press the [a] or [d] button and select from "MID " § "MID " § "MID " § "MID ". 3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain, the F (center frequency) and the Q. MID GAIN : ­6 to 6 (The factory default setting is "0") 14 DXZ725 Basic Operations English 700Hz/1KHz/2KHz (The factory default setting is "1k") MID Q : 1.5/2 (The factory default setting is "2") 4. When the adfustment is complete, press the [A] button several times until the function mode is reached. MID F : Adjusting the Beat EQ
1. Press the [BEQ] button and select the Beat EQ mode (1 to 3) to adjust. 2. Press the [A] button and select "BASS BOOST or IMPACT or EXCITE". 3. Turning the [ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the ­ direction.
When BASS BOOST is selected, you can adjust the bass in the range of ­3 to 3. When IMPACT and EXCITE is selected, you can adjust the bass and treble in the range of ­3 to 3. Adjusting the TREBLE
The treble gain and treble F (center frequency) can be adjusted as follows. 1. Press the [A] button and select "TREB ". 2. Press the [a] or [d] button and select from "TREB " § "TREB " § "TREB ". 3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and adjust the gain and the F (center frequency). TREB GAIN : ­6 to 6 (The factory default setting is "0") TREB F : 8KHz/12KHz (The Factory default setting is "12K") 4. When the adjustment is complete, press the [A] button several times until the function mode is reached. 4. When the adjustment is complete, press the [A] button several times until the function mode is reached. Turning on/off the loudness
The loudness effect emphasizes the bass to create a natural sound tone. When you are listening to music at a low volume, it is recommended to use the loudness effect. 1. Press and hold the [A] button for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, "LD" lights in the display. 2. Press and hold the [A] button for 1 second or longer to turn off the loudness effect. "LD" goes off in the display. Note: · When using a sold separately digital sound processor (DPH910), a feature called auto loudness is selected. This function is different from the loudness effect. For further details on the auto loudness feature, refer to the subsection "Output adjustment of auto loudness, subwoofer and playback band" in section "DSP Operations". Adjusting the balance
1. Press the [A] button and select "BALANCE". 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.
The factory default setting is "0". (Adjustment range: L13 to R13) 3. When the adjustment is complete, press the [A] button several times until the function mode is reached. Adjusting the fader
1. Press the [A] button and select "FADER". 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.
The factory default setting is "0". (Adjustment range: F12 to R12) 3. When the adjustment is complete, press the [A] button several times until the function mode is reached.
DXZ725 15 Radio Operations
English
FM reception
® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. Seek tuning
1. Press the [BND] button and select the desired band (FM or AM).
If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. Changing the reception area
This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. qSetting the reception area 1. Press the [BND] button and select the desired radio band (FM or AM). 2. While pressing the [D] button, each time you press and hold the number "6" of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA.
Any station preset memories are lost when the reception area is changed. 2. Press the [a] or [d] button to automatically seek a station. When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies. Manual tuning
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (FM or AM).
If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Listening to the radio
1. Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.
PS: Programme service name A Digital Radio (DAB) program can be received only in Canada. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 § FM2 § FM3 § AM § FM1... 3. Press the [a] or [d] button to tune in the desired station. 2. Tune into a station. qQuick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. qStep tuning: Press the [a] or [d] button to manually tune in a station. Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station.
Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. 16 DXZ725 Radio Operations Manual memory
1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. CD Operations
English
Loading a CD
1. Press the [Q] button. The MOTORIZED FACE opens. CAUTION
Be careful not to get your fingers caught when opening and closing the MOTORIZED FACE. 2. Insert a CD into the center of the insertion slot with the label side facing up. The CD plays automatically after loading. Notes: · Never insert foreign objects into the CD insertion slot. · If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. or mark and · Discs not bearing the CD-ROMs cannot be played by this unit. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the centre of the insertion slot. 3. After loading a CD, the MOTORIZED FACE closes automatically. Notes: · Note that MOTORIZED FACE closes immediately after a CD is inserted into CD insertion slot. · If no CD is loaded in the MOTORIZED FACE, it closes after 30 seconds. Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press and hold the [SC] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [SC] button. 2. When a desired station is tuned in, press the [SC] button again to continue receiving that station. Note: · Be careful not to press and hold the [SC] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. Listening to a CD already inserted
Press the [FNC] button to select the CD mode. Play starts automatically. If no CD is loaded in the unit, "NO DISC" appears in the display. Instant station recall (ISR)
Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes. qISR memory 1. Select the station that you wish to store in ISR memory. 2. Press and hold the [ I ] button for 2 seconds or longer. qRecalling a station with ISR In any mode, press the [ I ] button to turn on the radio function and tune the selected radio station. "ISR" appears in the display. Press the [ I ] button again to return to the previous mode. Pausing play
1. Press the [ ] button to pause play. "PAUSE" appears in the display. 2. To resume CD play, press the [ again. ] button DXZ725 17 CD Operations English Ejecting a CD
1. Press the [Q] button. The MOTORIZED FACE opens and a CD ejects. "EJECT" appears in the display. Scan play
The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled.
The scan play is useful when you want to select a desired track. CAUTION
Be careful not to get your fingers caught when opening and closing the MOTORIZED FACE. 2. Remove the CD and press the [Q] button to close the MOTORIZED FACE. Notes: · Be sure to close the MOTORIZED FACE after removing the CD. · The MOTORIZED FACE closes automatically 30 seconds after removing the CD.
If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload) 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. Note: · If you force a CD into before auto reloading, this can damage the CD. 1. Press the [SC] button to start scan play. "SCN" lights in the display. 2. To cancel the scan play, press the [SC] button again. "SCN" goes off from the display and the current track continues to play. Repeat play
The repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RP] button. "RPT" lights in the display and the current track is repeated. 2. To cancel the repeat play, press the [RP] button again. "RPT" goes off from the display and normal play resumes. Random play
The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RD] button. "RDM" lights in the display, an individual track is selected randomly and play begins. 2. To cancel the random play, press the [RD] button again. "RDM" goes off and normal play resumes. Selecting a track
qTrack-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. qTrack-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. Fast-forward/fast-backward
qFast-forward Press and hold the [d] button for 1 second or longer. qFast-backward Press and hold the [a] button for 1 second or longer. Top function
The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc. 18 DXZ725 Operations Common to Each Mode
English
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows. Mode CD mode TV mode CD changer mode DCZ625 connected CDC1255z connected Number of titles 50 titles 15 titles Number of titles 100 titles 50 titles 5. Press and hold the [ ] button for 2 seconds or longer to clear the title and cancel title input mode. Turning the external output adjustment display on/off
When not using the external output, you can turn off the "NON-FADER" display.
The factory default setting is "ON". Even if the level adjustment display is set to "OFF", signals can be output from the external output. 1. Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV). 2. Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title. 3. Press the [D] button and display the main. 4. Press the [T] button. "TTL" appears in the display and the cursor position flashes. 5. Press the [a] or [d] button to move the cursor. 6. Press the [D] button to select a character. Each time you press the [D] button, the character changes in the following order: Capital letters § Numbers § Symbols § Umlaut § Capital letters... 7. Turn the [ROTARY] knob to select the desired character. Turning the [ROTARY] knob clockwise moves the cursor to the next character; turning it counterclockwise moves the cursor to the previous character. 8. Repeat steps 5 to 7 to enter up to 10 characters for the title. 9. Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode. 1. Press and hold [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "NONFADER". 3. Turn the [ROTARY] knob clockwise to set "ON" or counterclockwise to set "OFF". q ON: When you press the [A] button, the "NONFAD VOL" item is displayed.
The output level can be adjusted. q OFF: Even when you press [A] button, the "NONFAD VOL" item is not displayed.
The output level cannot be adjusted. 4. Press [T] button to return to the previous mode. Hi / Lo dimmer control
You can adjust the reduced illumination level of the dimmer.
The factory default setting is "ON". Clearing titles
1. Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title. 2. Press the [D] button and display the main. 3. Press the [T] button. "TTL" appears in the display and the display switches to the title input display. 4. Press the [BND] button. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "DIMMER". 3. Turn the [ROTARY] knob clockwise to "ON" or counterclockwise to "OFF". 4. Press the [T] button to return to the previous mode. DXZ725 19 Operations Common to Each Mode English Setting the method for Ttitle scroll
Set how to scroll in CD-TEXT or MD.
The factory default setting is "ON". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button and select "AUTO SCROLL". 3. Turn the [ROTARY] knob clockwise or counterclockwise and select "ON" or "OFF". q ON: To scroll automatically. q OFF: To scroll just 1 time when the title was changed or the title key was pressed. 4. Press the [T] button to return the previous mode. 2. Press the [a] or [d] button and select "AUX SENS". 3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from "SENS HIGH", "SENS MID" or "SENS LOW". 4. Press the [T] button to return to the previous mode. Setting the clock
1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "CLOCK". 3. Press the [ ] button. 4. Press the [a] or [d] button to select the hour or the minute. 5. Turn the [ROTARY] knob clockwise or counterclockwise to set the correct time.
The clock is displayed in 12-hour format. Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display ON or OFF.
The factory default setting is "ON". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "MESSAGE". 3. Turn the [ROTARY] knob clockwise or counterclockwise to set the message display ON or OFF. 4. Press the [T] button to return to the previous mode. 6. Press the [ ] button to store the time into memory. 7. Press the [T] button to return to the previous mode. Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
The factory default setting is "ON". AUX function
This system has an external input jack so you can listen to sounds and music from external devices connected to this unit. Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.
The factory default setting is "SENS MID". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button and select "AUTO SS". 20 DXZ725 Operations Common to Each Mode English 3. Turn the [ROTARY] knob clockwise or counterclockwise to select "AUTO SS ON" or "AUTO SS OFF". 4. Press the [T] button to return to the previous mode.
The following illustration presents one of the patterns which are shown when the screen saver function is turned on. Triggered audio mute for cellular telepones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility. DXZ725 21 8. OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
CD/MD changer functions
When an optional CD/MD changer is connected through the CeNET cable, this unit controls all CD/MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press the [FNC] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play.
If "NO MAGAZINE" appears in the display, insert the magazine into the CD changer. "DISC CHECK" appears in the display while the player loads (checks) the magazine. If "NO DISC" appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. If "NO DISC" appears in the display, load MDs into the MD changer. English Switching disc titles and track titles(MD)
This unit can display disc titles and track titles already entered on MDs. Titles up to 128 characters long can be displayed by scrolling the titles.
Titles cannot be entered for MDs with this unit. 1. Press the [D] button to display the title. The disc title or track title is displayed. 2. Each time you press and hold the [D] button for 1 second or longer, the display toggles between the disc title and the track title. q Scrolling titles When a title is longer than 11 characters, you can scroll through it with the following operation. 1. Display the MD title (disc or track). 2. Press the [T] button. The display scrolls through the title. CAUTION
CD-ROM discs cannot be played in the CD changer. Selecting a CD
Each [DIRECT] button corresponds to a disc loaded into the magazine. qSelecting a disc from 1 to 6 Press the corresponding [DIRECT] button (1 to 6) to select the desired disc. qSelecting a disc from 7 to 12 (only when a 12 disc CD changer is used.) Press and hold the [DIRECT] button (1 to 6) for 1 second or longer to select the desired disc.
If a CD is not loaded in a slot of magazine, pressing the [DIRECT] button corresponding to its disc number is invalid. Pausing play
1. Press the [ ] button to pause play. "PAUSE" appears in the display. 2. To resume play, press the [ ] button again. Displaying CD titles
This unit can display title data for CD-text CDs and user titles input with this unit. 1. Press the [D] button to display the title. 2. Each time you press and hold the [D] button for 1 second or longer, the title display changes in the following order: User title (disc) § CD-text title (disc) § Artist name § CD-text title (track) § user title (disc)... Note: · If the CD playing is not a CD-text CD or no user title has been input, "NO-TITLE" appears in the display. q Scrolling a CD-text title When a CD-text title is longer than 11 characters, you can scroll the display as follows. 1. Display the CD-text title (disc or track). 2. Press the [T] button. The title scrolls. Selecting an MD
Each [DIRECT] button corresponds to an MD loaded into the MD changer. Press the corresponding [DIRECT] button (1 to 6) to select the desired disc.
If an MD is not loaded in a slot of MD changer, pressing the [DIRECT] button corresponding to its disc number is invalid. 22 DXZ725 CD/MD Changer Operations English Selecting a track
qTrack-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. qTrack-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. Scan play
Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled.
The scan play is useful when you want to select a desired track. 1. Press the [SC] button to start track scanning. "SCN" lights in the display. 2. To cancel the scan play, press the [SC] button again. "SCN" goes off from the display and the current track continues to play. Disc scan play Fast-forward/fast-backward
qFast-forward Press and hold the [d] button for 1 second or longer. qFast-backward Press and hold the [a] button for 1 second or longer. Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD (MD) changer. This function continues automatically until it is cancelled.
Disc scan play is useful when you want to select a desired CD (MD). Top function(CD)
The top function plays from the first track (track No. 1) of the disc. qWhen playing a disc 1 to 6 Press the [DIRECT] button (1 to 6) with the same number as the CD playing. qWhen playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press and hold for 1 second or longer the [DIRECT] button (1 to 6) with the same number as the CD playing.
If a CD is not loaded in a slot of magazine, pressing the [DIRECT] button corresponding to its disc number is invalid. 1. Press and hold the [SC] button for 1 second or longer. "DISC" and "SCN" light in the display and disc scan play starts. 2. To cancel disc scan play, press the [SC] button again. "DISC" and "SCN" go off from the display and the current track continues to play. Repeat play
Repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RP] button. "RPT" lights in the display and the current track is repeated. 2. To cancel repeat play, press the [RP] button again. "RPT" goes off from the display and normal play resumes. Top function(MD)
The top function plays from the first track (track No. 1) of the disc. Press the [DIRECT] button (1 to 6) with the same number as the MD playing.
If an MD is not loaded in a slot of MD changer, pressing the [DIRECT] button corresponding to its disc number is invalid. Disc repeat play
After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [RP] button for 1 second or longer. "DISC" and "RPT" light in the display and disc repeat play starts. 2. To cancel disc repeat play, press and hold the [RP] button again. "DISC" and "RPT" go off from the display and normal play resumes on the current track.
DXZ725 23 CD/MD Changer Operations TV Operations
TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. English Random play
Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RD] button. "RDM" lights in the display and random play begins. 2. To cancel random play, press the [RD] button again. "RDM" goes off from the display and normal play resumes. Watching a TV
1. Press the [FNC] button and select the TV mode. 2. Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2. 3. Press the [a] or [d] button to tune in the desired TV station. Disc random play
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press and hold the [RD] button for 1 second or longer. "DISC" and "RDM" light in the display and disc random play starts. 2. To cancel disc random play, press and hold the [RD] button again. "DISC" and "RDM" go off from the display and normal play resumes from the current track. Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [RD] button to select VTR. 2. To return to the TV broadcast, press the [RD] button. Tuning
There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning. Seek tuning
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. 2. Press the [a] or [d] button to automatically seek a station. Press the [d] button to automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down. 24 DXZ725 TV Operations English Manual tuning
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (TV1 or TV2).
If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" lights in the display and manual tuning is now available. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). 2. Press and hold the [SC] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. 1. Press the [SC] button. 2. When the desired station is found, press the [SC] button again to remain tuned to that station. Note: · Do not press and hold the [SC] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory. 2. Tune into a station. qQuick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. qStep tuning: Press the [a] or [d] button to manually tune in a station. Recalling a preset station
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). 2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "TV DIVER". 3. Turn the [ROTARY] knob clockwise to set to "ON" or counterclockwise to set to "OFF". q ON: Sets reception emphasizing the visual. q OFF: Sets the diver setting to OFF. 4. Press the [T] button to return to the previous mode. Manual memory
1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. Auto store
Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. DXZ725 25 DSP Operations
English
DSP control function If the DSP (DPH910), sold separately, is connected to this unit using the CeNET cable, all the functions of the DSP can be controlled. ] button returns to the ad6. Pressing the [ justment selection display. 7. Press the [T] button to return to the previous mode. DSF functions
There are 2 modes available in DPH910, STD mode and professional mode. Choose one of them and adjust the sound field and the sound quality.
STD mode: Standard mode Selecting the easy mode or the professional mode
The factory default setting is "STD". qFunctions common to each mode: Auto loudness, etc. qStandard mode: Adjustment using the graphic equalizer function and the DSF function. qProfessional mode: Adjustment using the VSE function and the parametric equalizer function.
When the STD mode is selected, adjustment for the professional mode cannot be made. On the contrary, when the professional mode is selected, adjustment for the STD mode cannot be made. For details on functions of each mode, refer to the owner's manual supplied with the DPH910. Hereafter the graphic equalizer is referred to as a G.EQ, the space equalizer referred to as VSE and the parametric equalizer referred to as P.EQ. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "AC-P SEL". 3. Turn the [ROTARY] knob clockwise or counterclockwise to set the mode to "STD" or "PRO". 4. Press the [T] button to return to the previous mode. Entering titles
You can give a title to the user memory of the DSF, G.EQ, VSE and P.EQ that you have adjusted yourself. 1. Press the [A] button to select the adjustment mode in which you want to give a title. 2. Press the [BND] button to select "USR". "USR" will be displayed in the function mode indication. 3. Press one of the [DIRECT] buttons to select the user memory to which you want to give a title. 4. Press the [T] button. 5. Press the [a] or [d] button to move the cursor. 6. Press the [D] button to select the character fonts. There are capital letters, small letters, numbers, symbols and umlaut available for the character. 7. Turn the [ROTARY] knob clockwise or counterclockwise to select the character you want to input. 8. Repeat steps 5 to 7 to input the title. 9. Press and hold the [ ] button for 2 seconds or longer to put the title into memory. The title input mode is cancelled. Operations common to each mode
Output adjustment of auto loudness, subwoofer and playback band
1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "SOUND". 3. Press the [ ] button. 4. Press the [a] or [d] button to select the adjustment item. There are "A-LD LEVEL", "WOOFER OUT", "WOOFER LPF", "HPF" and "TEST TONE" available for the adjustment items.
For details on each adjustment item, refer to the owner's manual supplied with the DPH910. 5. Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. 26 DXZ725 DSP Operations English STD mode/G.EQ operations
Note: · The adjustment made in standard mode is not reflected in the adjustment in professional mode. On the contrary, the adjustment made in professional mode is not reflected in the adjustment in easy mode. 4. Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. The adjustment range is from ­6 to 6. 5. Repeat steps 3 to 4 to complete the adjustment and press the [T] button. 6. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the edited contents.
You can give a title to the user memory. For the inputting method of titles, refer to the subsection "Entering titles" in section "Operations common to each mode". G.EQ effect ON/OFF
While the "G.EQ" indication is lit in the display, the G.EQ effect is set to "ON".
The factory default setting is "ON". 1. Press the [A] button and select "G.EQ". While "G.EQ" is selected, "G.EQ" blinks in the display. 2. Press the [D] button. "G.EQ" in the display lit or unlit.
When "G.EQ" is unlit, the G.EQ effect is set to OFF. Note: · If the G.EQ effect is set to OFF, the adjustment made in "G.EQ operations" is not reflected in the music source. STD mode/DSF operations
DSF effect ON/OFF
When the "DSF" indication is lit in the display, the DSP effect is set to "ON".
The factory default setting is "ON". 1. Press the [A] button and select "DSF". 2. Press the [D] button. "DSF" in the display lit or unlit.
When "DSF" is unlit, the DSF effect is set to OFF. Note: · If the DSF effect is set to OFF, the adjustment made in "DSF operations" is not reflected in the music source. Selecting a G.EQ menu
1. Press the [A] button and select "G.EQ". 2. Press the [BND] button to select "BASC" (basic). "BASC" is displayed in the function mode indication. 3. Press one of the [DIRECT] buttons and select the desired G.EQ menu.
To select the user memory, press the [BND] button to select "USR" and press one of the [DIRECT] buttons. Setting the listening position menu
1. Press the [A] button and select "DSF". 2. Press the [a] or [d] button to set the listening position type. There are FULL SEAT, FRONT-R, FRONT-L, FRONT (only front seats), REAR (only rear seats) and PASS available for the listening position types.
The factory default setting is "FULL SEAT". Editing/storing a G.EQ menu (User memory)
1. Select a G.EQ menu which you want to edit on the basis of. 2. Press and hold the [T] button for 1 second or longer. 3. Press the [a] or [d] button to select the frequency to be adjusted. There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz, 3kHz and 12kHz available for the adjustment frequency.
For details on each adjustment item, refer to the owner's manual supplied with the DPH910. Making fine adjustment of the listening position
1. Upon completion of setting the listening posi] button. tion, press the [ 2. Press the [a] or [d] button to select "BALANCE" or "FADER". The selected item blinks. 3. Turn the [ROTARY] knob clockwise or counterclockwise to adjust the balance and the fader. 4. Press the [ mode. ] button to return to the DSF DXZ725 27 DSP Operations English Selecting a sound field menu
1. Press the [A] button and select "DSF". "DSF" blinks in the display. 2. Press the [BND] button to select "BSC1" (basic-1) or "BSC2" (basic-2). "BSC1" or "BSC2" is displayed in the function mode indication in the display. 3. Press one of the [DIRECT] buttons and select the desired sound field menu.
To select the user memory, press the [BND] button to select "USR" and press one of the [DIRECT] buttons. VSE effect ON/OFF
While the "VSE" indication is lit in the display, the VSE effect is set to "ON".
The factory default setting is "ON". 1. Press the [A] button and select "VSE". 2. Press the [D] button. "VSE" in the display lit or unlit.
When "VSE" is unlit, the VSE effect is set to OFF. Note: · If the VSE effect is set to OFF, the adjustment made in "VSE operations" is not reflected in the music source. Editing/storing a sound field menu (User memory)
1. Select a sound field menu which you want to edit on the basis of. 2. Press and hold the [T] button for 1 second or longer. 3. Press the [a] or [d] button to select the item to be adjusted. There are "EFFECT", "DELAY", "REAR MIX", "REV.TIME" or "ROOM SIZE" and "HIGH" or "LIVENESS" available for the items to be adjusted.
For details on each adjustment item, refer to the owner's manual supplied with the DPH910. Selecting an VSE menu
1. Press the [A] button and select "VSE". 2. Press the [BND] button to select "BASC" (basic). "BASC" is displayed in the function mode indication in the display. 3. Press one of the [DIRECT] buttons and select the desired VSE menu.
To select the user memory, press the [BND] button to select "USR" and press one of the [DIRECT] buttons. Editing/storing an VSE menu (User memory)
1. Select an VSE menu which you want to edit on the basis of. 2. Press and hold the [T] button for 1 second or longer. 3. Press the [a] or [d] button to select the item to be adjusted. There are "DIFFUSE", "CAR WIDTH" and "CAR LENG" available for the items to be adjusted.
For details on each adjustment item, refer to the owner's manual supplied with