to be worked
into your theatrical or archi-
tectural applications. With
millions of colors at your
control, any designer will
nd comfort in the
abilities of LEDs and the
ONYX
TM
LED striplight.

100,000 hour lamp life 24 degree beam spread Individually addressable lamps Innite color mixing Energy efcient - cool and quiet operation Low prole and light weight aluminum design On board power supply and power data module No modications to use in both 120V and 240V

environments DMX512 data controls with in and out data ports Unique indexing lamp holders available Supplied with lamps, lenses and mounting options

(trunnion and yoke - 3 lamp units only) with hardware. Custom lengths and lamp congurations available
ONYX
TM

Ordering Information
Description
Model
Lighting & Electronics, Inc.
Market Street Industrial Park
Wappingers Falls, NY 12590
Tel 800-553-1244
Tel 845-297-1244
Fax 845-297-9270

Info@le-us.com


www.le-us.com
ONYX
TM

LED STRIPLIGHT- 3 LAMP FIXED
6530-3F
ONYX
TM
LED STRIPLIGHT- 3 LAMP INDEXING
6530-3I
ONYX
TM
LED STRIPLIGHT- 6 LAMP FIXED
6530-6F
ONYX
TM
LED STRIPLIGHT- 6 LAMP INDEXING
6530-6I
ONYX
TM
LED STRIPLIGHT- 12 LAMP FIXED
6530-12F
ONYX
TM
LED STRIPLIGHT- 12 LAMP INDEXING
6530-12I
Accessories:
Color Kinetics Zapi
Color Kinetics Smart Jack 3
Yoke (Three lamp ONYX
TM
only)
PipeDream
TM
pipe clamps
Get-A-Grip
TM
pipe clamps
Trunnion (pair)
Diffusion lenses
Color Kinetics
Zapi
Color Kinetics
Smart Jack 3
Licensed by Color Kinetics under one or more of the following
patents: US Patent Nos. 6,016,038, 6,150,774, and other patents listed at
http://colorkinetics.com/patents/; other patents pending.Color Kinetics
and the Color Kinetics logo are registered trademarks of Color Kinetics
Incorporated.
le_onyx_brochure.indd 1
10/18/2005 11:04:52 AM The luminaire shall be a UL//C-UL Listed LED striplight with rim mount lamp holders to ac-
cept 24-volt MR-16 LED lamps of 5 watts max. each. The unit shall be wired with one parallel
circuit of 24 volts. The center distance between lamps shall be 4.74 inches. The xture shall
be constructed from an extruded aluminum housing, die-cast aluminum end caps and internal
componants fabricated from aluminum sheetmetal. The cross-sectional dimension of height
and depth shall not exceed 3-3/4 x 5 respectively.
Relamping shall be accomplished from the front of the xture by releasing the latches on the
back of the cover, tilting the cover forward and pulling the lamp(s) straight out from the porce-
lian lamp holder. No tools shall be required for relamping and the prefocused lamp alignment
will not be disturbed.
The luminaire shall be supplied with iColor MR g2 lamps mounted in either a xed or indexing
conguration, power cord with molded edison plug, 5 pin M/F XLR, clear and diffused lenses,
two aluminum single mount trunnion for overhead or oor use, aluminum yoke (3 lamp units
only) and mounting hardware.
The unit shall be supplied with a black & gray powder coat exterior.
The ONYX
TM
is available in
3 light, 6 light and 12 light
congurations. The xture
features an on board power
supply and power data
module along with 5 pin XLR
in and out data ports.
In addition, each xture is
supplied with lamps, clear
and defused lenses, trun-
nion, mounting hardware,
pipe clamps and yoke.
Specication:
The ONYX
TM
LED striplight is a lightweight, compact and customizable MR16 LED striplight
designed for washing large areas with a full range of rich, saturated colors and color chang-
ing effects. ONYX
TM
is ideally suited for cyclorama, special effect or color wash applications
in theatres, TV studios, concert, industrial events and display lighting along with architectural
applications.
Every ONYX
TM
LED Striplight is equipped with the Color
Kinetics iCOLOR MR g2 lamps. These lamps generate a
countless number of saturated colors and color changing
effects. All of this while providing extremely long lamp
life and cool operating temperatures.
In addition, the ONYX
TM
allows for each lamp to have a
unique DMX address. Each lamp can be given a unique
address or can be congured in groups using the
same address.
ONYX
TM
Options:
Two versions of the ONYX
TM
LED Striplight are available.
First, the xed lamp holders are mounted rigidly on the lamp cover.
No positioning adjustments to individual lamps are intended to be made.
In the unique indexing version of the ONYX
TM
, the lamp holders can be rotat-
ed independently along the horizontal plane of the xture. To rotate a lamp,
simply reach into the openings in the cover and grasp the sides of the lamp
holder. The lamp holder can be rotated in 10 degree increments to a total of
40 degrees to either side of center.
Indexing Lamps
Fixed Lamps
Measured on:
White
Beam center:
111 cd
Multipliers:
0.34 Red, 0.47 Green, 0.21 Blue
Dashed line:
Indicates 50% of peak
Candle Power Distribution Source Specications
Optics:
Metallized polycarbonate reectors
Lens:
Tempered clear glass lens
Source:
10 LEDs (4 red, 3 green, 3 blue)
Beam Angle: 24° (at 50% of peak illuminance)
Distribution: Symmetric direct illumination
CCT:
Adjustable 1,00010,000K
CRI:
Not measurable (CIE 13.3-1995)
Illuminance Distribution
Illuminance Distribution Parameters
Units:
Footcandles (top)/Lux (bottom) 10.8 lux = 1 fc
Location:
Bottom of grid, 1/0.3m from surface, light at

perpendicular to surface
Measured on: All, reectance model 50%


Illuminance
Light Output Photometric data is based on test results from an
independent testing lab.

Dimensional Information
le_onyx_brochure.indd 2
10/18/2005 11:04:56 AM