ta_Sheet.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
SXGA+ Engine SXGA+ Engine
VS-PH40U
Display Engine
ELECTRICAL SPECIFICATIONS
Signal input terminal
Analog RGB: 5BNC (RGBHV) x1
Digital RGB: DVI-D x1
Input scanning frequency
Signal
VGA (640x480) SXGA+ (1400x1050)
resolution
Horizontal
31.5kHz 78kHz
SYNC Width: > 0.5 �s
BP Width: > 1.0 �s
No interlace signals
Vertical
49.5Hz 85Hz
SYNC Width: > 2 Lines
BP Width: > 10 Lines
FP Width: > 1 Line
Pixel clock rate
25 122MHz
Analog RGB video input signal
Video: 0.7VP-P positive / 75 Synchronous: TTL level (positive/negative)
High Level:2.5V-5.0V
Low Level : 0V-0.5V
Sync On Green: Video: 0.7VP-P positive
Synchronous: 0.3VP-P negative
Digital RGB video input signal
TMDS (DVI-D Connector)
Control signal input
RS-232C: D-Sub 9 pins
D-Sub 9 pins x 2 (input, output)
Mitsubishi original control link
Wired remote : F3.5 Jack
IR Receiver
Input board slot
Input board slot for VC-B20KA/KV x 1
Function
Color space control, Digital gradation circuit
Mechanical auto lamp changer unit, Smart lamp
Light source
200W ultra-high pressure mercury lamp
Voltage range
AC 100 240V +/- 10% , 50/ 60Hz +/- 1Hz
Power consumption (100/240V)
295/295 W
Operating current (100/240V)
3.1/2.0 Amp.
Inrush current (100/240V)
30/60 Amp.
Thermal dissipation
253.7k cal/h (1006.7 BTU/h)
OPTICAL SPECIFICATIONS SXGA+ MODE
SXGA MODE
Light output
1300 ANSI Lumen (typ.)
1150 ANSI Lumen (typ.)
Diagonal image size
67 84
67 84
Throwing distance
67:1005.7 +/- 31.4mm
67:1076.5 +/- 33.5mm
(Lens hood top - Screen)
70:1052.6 +/- 32.8mm
70:1126.7 +/- 35.0mm
84:1272.2 +/- 39.4mm
84:1361.5 +/- 42.1mm
Throw ratio (Exit pupil -
0.769 (Nominal)
0.841 (Nominal)
Screen)/Screen width
Exit pupil Lens hood top
41.2mm (Nominal)
41.2mm (Nominal)
Contrast ratio
1600:1 (typ.)
1600:1 (typ.)
Brightness uniformity
85% at 90% image height (typ.)
85% at 90% image height (typ.)
MECHANICAL SPECIFICATIONS
Dimensions
Optical unit
Circuit box
Width
23.6 " (600mm)
8.5" (215mm)
Height
9.0" (230.3mm)
7.2" (184mm)
Depth
13.6 " (344mm)
6.5" (165mm)
Weight
28.6 lbs. (13kg)
7.7 lbs. (3.5kg)
ENVIRONMENTAL SPECIFICATIONS
Temperature and humidity
10�C 40�C 20% 80% non-condensing
condition at operation
Temperature and humidity
-20�C 50�C 20% 80% non-condensing
condition at storage
SAFETY APPROVALS
Safety approvals
UL60950, CSA22.2 No.60950, EN60950, GB 4943
EMC
FCC part 15 Class A; Industry Canada Class A; EN55022 Class A,
EN55024; EN61000-3-2; EN61000-3-3; GB 9254, GB17625.1
OPTIONS
Remote control unit
R-FD10TX
Scaling & video input board
VC-B20KA/KV
Spare lamp unit
S-PH40LA
6 axis adjuster
592 B892-10 Includes optical unit and
electrical chassis Designed for 67" to 84"
screen sizes

200W UHP lamp Lamp changer Smart Lamp and Smart
Colorwheel Digital Color Space Control
Mitsubishi Quality With Proven Reliability
IMAGE PANEL
Type
DLP technology (0.95 DMD 1 chip)
Resolution
SXGA+ Mode:1400 x 1050 pixels
SXGA Mode:1280 x 1024 pixels
6 Axis Adjuster
(Optional)