>
This is not the International Symbol for Surge Protection... But it should be! 124 South Street Franklin, KY 42134
Telephone 1-800-621-4419 Fax: 270-598-8797
Email: parts@chimneytower.com
This is not the International Symbol
for Surge Protection...
But it should be!



191126
Rev2


CCTV - HEAD END PROTECTION
MAIN & SUB-PANEL PROTECTION
MAIN & SUB-PANEL PROTECTION
NEW
PAGE 1
PAGE 10
NEW
CCTV - HEAD END PROTECTION
NEW
NEW
DTG/DTGX/DTGXL Series
Commercial Service Entrance & Sub Panel Surge Protection Available in 12 voltage/wiring configurations RFI/EMI noise attenuation Options include NEMA 4X or flush enclosure, audible alarm,
dry contacts and surge counter
DTK-D75 Series
Commercial Sub Panel Surge Protector Available in 4 voltage/wiring configurations Excellent RFI/EMI noise attenuation Options include flush enclosure, audible alarm, dry contacts and surge counter
DTK-D50 Series
Commercial Equipment Surge Protector Available in 4 voltage/wiring configurations Excellent RFI/EMI noise attenuation Options include flush enclosure, audible alarm, dry contacts and surge counter
DTK-120/240HD Series
120/240 Volt Residential Service Entrance Surge Protector Available for surface or flush mount panels Super tight clamping Standard weatherproof enclosure and dual diagnostic lights Optional audible alarm (HD3)
DTK-120/240SA
120/240 Volt Residential Service Entrance Surge Arrester Designed for meter base or panel installation Excellent RFI/EMI noise attenuation Unique ground quality diagnostic circuit
DTK-120/240/480 CM Series
Secondary Surge Arrester Economical protection for pumps, motors and HVAC condensers Available for single phase and three phase (specify suffix 3CM) Diagnostic indicator confirms ground presence, unit function and power on
DTK-DRP16
Digital Recorder Battery Back-up Surge Protector Complete AC Power, Phone, Network Data Lines & Video protection for
Digital Video Recorders Battery back-up provides up to 20 minutes back-up power Can be rack mounted with optional kit DTK-DRP-MBK Reduces non-billable service calls
DTK-RM16NM
Rack Mountable Video Surge Protection Provides protection for 16 cameras in 1 unit Single point ground. 2.8V clamping
DTK-RMAC9
Rack Mountable Power Surge Protection Provides nine protected outlets One button emergency shutdown Multiple diagnostics show system status at a glance
DTK-BU450
Heavy Duty Surge Protector with Battery Backup Ideal unit for multiplexers, VCRs or monitors Surge protection for power, telephone/modem, and (optional) CAT5 Keeps an average CCTV system or PC up and running for 15 - 20 minutes
DTK-LVLP-D Series
RS485 / 422 Data Surge Protector for Pan/Tilt/Zoom Camera Installation 8 pair protection is perfect for multiple camera usage Protects matrix controllers or DVR from induced surges on data lines Compact size allows multiple installations, options include plug-in and Din-Rail mounting
DTK-TPV Series
Twisted Pair Video Surge Protection Ideal protection for twisted pair video transceivers at head end equipment Available in 2 and 4 pair (4, 8 wires) models No signal degradation
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003 VOICE SURGE PROTECTION
VOICE SURGE PROTECTION
FIRE ALARMS SYSTEM PROTECTION
PAGE 3
PAGE 8
FIRE ALARMS SYSTEM PROTECTION
NEW
NEW
NEW
NEW
NEW
DTK-FPK
Surge Protection Kit for Fire Alarm Panels Complete protection for power and two dialers Contains (1 each) DTK-120HW and (2 each) DTK-MRJ31XSCP-WP (See pg. 8) DTK-MRJ provides sneak current protection
DTK-120HW
Hardwire 120 Volt Surge Protector Recommended by major alarm panel manufacturers Diagnostic indicator confirms ground presence, unit function and power on UL1449 dedicated AC circuit meets standards for all alarm panels
DTK-LVLP Series
Universal Low Voltage Surge Protector Ideal protection for Off Premise or At Risk circuits Available in 1 - 8 pair (2 - 16 wire) configurations Screw terminals accept 22 - 16 awg or 14 - 10 awg (please specify) Provides over-voltage protection (
specify 6, 14, 30, 50, 75, 95 or 130 volt) and
(
optional
) fused units
DTK-2MLP Series
Modular 2 Stage Low Voltage Surge Protector Perfect for applications requiring multiple termination of control, data and signal wires Unique diagnostic indicator shows need for unit replacement 8 voltage levels available Order with DTK-MB-10 hardwire base
DTK-LVLP-F
SLC Loop Protector for Fire-Lite & Notifier Panels Ideal data protection for panel-to-panel communication circuit Use ensures UL compliance on communication circuit Small footprint & terminal strip connection makes for easy installation
DTK-120S15A
120 Volt Critical Load Surge Protector Series / Hybrid circuit design meets government and military specs Multiple diagnostic indicators monitor protection status, ground
presence, ground fault and fuse status User replaceable fusing means less downtime Excellent RFI/EMI filtering improves equipment performance
DTK-SNAP-LITE Series
Modular Phone Line Surge Protector Unique multi-function diagnostic LED shows protection status, continuity
and line usage Provides over voltage protection and self-resetting fusing One pair design allows break-out of multiple voltages on one block The new Industry Standard for protection versatility and
ease of installation
DTK-MT25
RJ21X to RJ21X 25 pair Surge Protector Perfect for large telephone systems and building-to-building wire runs Provides over voltage protection (specify 6, 14, 30, 50, 75, 95, 130 volt)
and self-resetting fusing (SCP suffix)
DTK-3GTP
KSU/PBX System with Chassis Ground Termination - 3 Outlet Surge Protection Chassis ground lug speeds installation and eliminates ground loops Diagnostic LED indicates unit function and ground presence Also available without ground lug when chassis ground is not required
DTK-MRJ Series
Modular Station Set Surge Protector Protection for two line systems and individual equipment Available in RJ11, RJ14, RJ45 and RJ31X Provides over voltage protection (specify 6, 14, 30, 50, 75, 95, 130 volt)
and self-resetting fusing (SCP suffix) and (optional) non-fused units
DTK-P Series
Parallel Punch Down / Hard Wire Surge Protector Lowest cost per pair for solid-state surge protection Flying leads provide connection versatility Can be configured in combinations of 1- 25 pairs
and 6, 14, 30, 50, 75, 95, 130 volt clamping level
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003 CCTV / CCTP - CAMERA PROTECTION
CCTV / CCTP - CAMERA PROTECTION
DATA LINE SURGE PROTECTION
DATA LINE SURGE PROTECTION
PAGE 9
PAGE 2
N E W
N E W
N E W
N E W
N E W
N E W
N E W
N E W
N E W
N E W
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003
Telephone: 800-621-4419 Fax: 270-598-8797 E-mail orders: parts@chimneytower.com DITEK 2003
DTK-DP4P-TPV
PTZ Camera Surge Protector for Twisted Pair Video Provides protection for power, video and four data conductors for PTZ cameras Single point grounding improves protection and speeds installation Complete protection with one device that mounts easily at pole base
DTK-PVP-TPV
Fixed Camera Surge Protector for Twisted Pair Video Provides protection for power and video conductors to fixed cameras Single point grounding improves protection and speeds installation Complete protection with one device that mounts easily at pole base
DTK-DP4P
PTZ and Dome Motorized Camera Surge Protector Provides protection for power, video and four data conductors for PTZ cameras Single point grounding improves protection and speeds installation Complete protection with one device that mounts easily at pole base
DTK-PVP
Fixed Camera Surge Protector Provides protection for power and video conductors to fixed cameras Single point grounding improves protection and speeds installation Complete protection with one device that mounts easily at pole base
DTK-iBNC
Inline Video Surge Protector Designed for camera locations where no ground is available for surge protection Utilizes unique dissipation technology Fast and easy installation
DTK-VSP-BNC-A
Single Line CCTV Surge Protector Provides protection for analog or digital video line Recommended for small installations where power is already protected Single and dual line models available
DTK-RMC5
19 Rackmount Surge Protector for CAT 5 Data / UTP Lines Perfect unit for new installations 12 port, 110 block In, RJ45 Out - EIA / TIA 568 Eliminates need for separate patch panel Hot-Swap modules allow service without system downtime
DTK-RM16C5
19 Rackmount Surge Protector for CAT 5 Data / OSP Lines Ideal unit for retro-fit applications 16 port, RJ45 In & Out - EIA / TIA 568 Eliminates need for separate patch panel Hot-Swap modules eliminate system shut down for service
DTK-MRJ-45 Series for Data
Modular Surge Protector for High Speed Data Ideal for P.O.S. and finished office (GP version) environments Available for CAT 5 or DSL Plug and play RJ45 jack speeds installation GP option allows ground reference from a standard electric receptacle
DTK-VSP-NH
Coaxial Cable Surge Protector Designed specifically for Broadband, multi-media cable installations Environmentally resistant housing for indoor or outdo