EDM 52911
PXI/cPCI PROGRAMMABLE
DC POWER SUPPLY
Model 52911
Features :
1-Slot, 3U PXI card
Dual lsolated outputs; o-30VDC/2A/30W
per output
Programmable current limit
Includes over voltage, over current,
short circuit protection
On-board isolation and remote sense
relays
14 Bit read back of output voltage and
current
Outputs maybe connected in parallel or
series
16 bit DLLs provided
Chromaas Model PXI200 Programmable
power supplies are the industrys first
embedded power supplies packaged on
standard single-slot 3U PXI card formats.
The advantages of using embedded PXI
power supplies over conventional rack-
and-stack power sources include;
significantly faster execution speeds for
great ATE throughput, size and weight
reductions, and greater modularity
thereby reducing spares and
maintenance costs and increasing
system up-time.
POWER LEVELS
The PXI200 provides two independent
and isolated 30W channels each
programmable from 0-30VDC to a
maximum of 2 amps. The instruments
include programmable current limit to
protect critical UUTs from excessive
current as well as built in isolation and
remote sense relays. For greater power
or voltage applications channels maybe
used in series or in parallel using an
optional front panel mounted adapter
module also available.
INPUT POWER
To avoid excess power draw from the PXI
backplane, the PXI200 draws input power
(+48VDC) via front panel connections.
This approach not only minimizes power
required from the backplane but also
maintains complete isolation between
backplane logic and power conversion
circuitry for noise immunity. For
applications where +48VDC is not
available, Chroma provides an optional
AC-DC adapter which allows the
instrument to be operate from
115VAC/220VAC mains.
COMPLIANT TO PXI AND cPCI
STANDARDS
The PXI200 power supply cards comply
with the latest PXI Revision 1.0
specifications of the PXI System Alliance
(PXISA) as well as the CompactPCI
specifications as defined by the PCI
Industrial Computer Manufacturing Group
(PICMG). Thus, the PXI200 maybe be
used in either PXI or CompactPCI
mainframes.
CONCLUSION
If you have selected PXI or cPCI for your
next generation of ATE, considering
taking full advantage of its benefits by
eliminating antiquated rack-and-stack
chassis and replacing them with
embedded power supplies. The end
result will be a more fully integrated
system which is fast, elegant and cost
effective. 52911
PXI/cPCI PROGRAMMABLE DC POWER SUPPL
Y
CHROMA ATE INC.
No 43, Wu-chuan Road, Wu-ku
Industry Park,Wu-ku, Taipei Hsien,
Taiwan
Tel: +886-2-2298-3855
Fax: +886-2-2298-3596
U.S.A.
7 Chrysler Irvine CA 92618
Tel: +1-949-421-0355
Fax: +1-949-421-0353
Toll Free: 1-800-478-2026
EUROPE
Max Planckstraat 4 6716 BE
Ede, The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
CHINA
8F, No4, Nanyou Tian An Industrial Estate,
Shenzhen, China
PC: 518052
Tel: +86-755-664-4598
Fax: +86-755-641-9620
Order Information
52911: PXI/cPCI Programmable Power Supply
S P E C I F I C AT I O N S
PXI52901-2002-01
All specifications are subject to change without notice.
Systems Alliance
Dimensions
3U PXI (single slot)
Output Voltage
Channel #1
0-30VDC, 2 Amp, 30W
Channel #2
0-30VDC, 2 Amp, 30W
Voltage Accuracy
0.5% of programmed value +/- 50mV
Voltage setting resolution
12 Bits
Fault Protection

Over-voltage

Over-temperature

Short Circuit
PARD (20MHz)
<200mV PK-PK (<50mV PK- PK with noise reduction adapter)
Line Regulation
0.1% (Low line to high line)
Load Regulation
0.1% (10% to 90% load change)
Current Limit Accy
0.5% +/- 50mA (12 Bits Resolution)
Read back Voltage and Current
0.2% of Reading
Input
DC Input
Isolated +48VDC (dual)
AC Input (w/ Adapter 52911-1)
115V or 220VAC/ 50Hz or 60 Hz
Software API

VISA compatible via National Instrument's VISA 2.5 or above

20 Windows DLL's API
PCI Data Bus
PCI V2.2 compliant, 33MHz, 32 Bits
Operating Temperature
0-40 deg C (ambient air)
Operating Humidity
10% ~ 90 % relative
Storage Temperature
0
~ 70
ISOLATION
Channel to Channel
500V
Channel to Chassis
500V
S tandards

PXISA PXI 1.0

PICMG 2.0 R3.0 CompactPCI