dth=100% bgcolor=ccccff> « back to results for ""
Below is a cache of http://www.atisystem.com/pdfs/rtu.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Alarm Remote Terminal Unit Acoustic Technology, Inc. 30 Jeffries Street East Boston, MA 02128 tel (617) 567-4969 fax (617) 569-2964
www.atisystem.com EMAIL: sales@atisystem.com
Acoustic Technology, Inc.
This flexible and versatile unit is configurable for many standard
interfacing and control applications (custom control and monitoring
applications are available, consult factory with you specific
requirements). It can easily be field upgraded to provide any of the
standard listed options.
Alarm Remote Terminal Unit
Standard Equipment
Includes a NEMA4 cabinet, a RTU Controller Board, ON/OFF circuit
breaker, intrusion switch and a temperature compensated battery
charger. The RTU Controller Board is equipped with (8)
10amp/250VAC relay outputs, (8) optically isolated inputs, (4)
configurable analog data inputs, tone generator, local push buttons
for testing, Light Emitting Diodes (LEDs) for local status monitoring,
automatic gain control for consist live PA output volume, one RS-232
serial port, one RS-485 port and a universal FSK/DTMF radio interface.
Antenna equipment sold separately since the radio output power
and antenna type are tailored for individual site requirements.
Batteries not included. Requires two 12 VDC, 30 AH batteries.
Recommended Battery Manufacturer and Part Number:
Power Sonic PS12180-NB
Model # RTU
Standard Features
Local and remote control
and status monitoring
All Printed Circuit Boards
(PC boards) are conformal
coated to prevent damage
and insure proper operation
in harsh environments
A radio is used to receive
and transmit FSK data
signals (Other connection
medias are available, consult
factory for details).
All communication
transmissions include a
security method to prevent
unauthorized system
activations
Temperature compensated
battery charger insures that
the batteries are always
charged to full capacity
7 Configurations Available** **Configuration Options
1. Hardwired Alarm Push Button Unit (RTU-PBU-H)
Includes a Hardwire Monitor Pushbutton Board that supervises and monitors up
to 16 directly connected remote Push Buttons. The ATI system is configurable to
play either a total alarm tone and message or area specific alarm tone and
message when a Push Button is pressed at a remote location. Pushbutton
stations are sold separately. Refer to the attached Hardwire Push Button Station
Chart to order.
Hardwired Push Button Stations
(includes a Weather resistant Box that holds
momentary Button(s). Each Button includes a end-of-the-line resistor for supervision.)
:
Model #
Description
HPB1**
One Button Station - Contains 1 momentary Button
HPB2**
Two Button Station - Contains 2 momentary Buttons
HPB3**
Three Buttton Station - Contains 3 momentary Buttons
** Specify Push Button Color. W = White, R = Red, Y = Yellow
** Specify Push Button Name. Limited to 8 letters per button.
2. Wireless Alarm Push Button Unit (RTU-PBU-W
)
Includes a Wireless Push Button Receiver. This receiver can communicate and
supervise up to 16 Wireless Push Button Stations. The ATI system is
configurable to play either a total alarm tone and message or area specific
alarm tone and message when a Push Button is pressed at a remote location.
The Wireless Push Button Stations are sold separately; refer to the attached
Wireless Push Button Station Chart to order.
Wireless Push Button Stations (
Wireless Push Buttons sold separately.)
:
Model #
Description
WPB1
One Button Station - Weather resistant Box that holds 1
momentary Button.
WPB2
Two Button Station - Weather resistant box that holds 2
momentary Buttons
For Electrically Classified Areas:
WPB1 EXP
One Button Station
Same as WPB1 with Explosive Proof Battery Enclosure
WPB2 EXP
Two Button Station
Same as WPB2 with Explosive Proof Battery Enclosure
Three Button
Hardwire
Push Button Station
One Button
Explosive Proof Station
Configuration Options Acoustic Technology, Inc. 30 Jeffries Street East Boston, MA 02128 tel (617) 567-4969 fax (617) 569-2964
www.atisystem.com EMAIL: sales@atisystem.com
Acoustic Technology, Inc.
**Configuration Options
3. Fire Panel Interface Unit (RTU-FCP)
The option allows interfaces to a Fire Central Panel (FCP) and transmits
status information to the ATI Central Control Station. This status
information may be used to activate alarm tones and messages.
4. Radio Re-Broadcast Unit (RTU-BROD)
The Radio Re-Broadcast option will re-broadcast emergency alarm
messages on a second Radio Frequency.
5. Traffic Light Control Unit (RTU-TR)
Programmed to control and operate a Traffic Light in response to specific
emergencies. Useful in preventing traffic from entering a specific area
where the emergency condition exists.
6. Gate Control Unit (RTU-GATE)
Programmed to control and supervise remote access gates. Useful in
preventing and reporting unauthorized access to a secure area.
7. PA Interface Unit (RTU-PA)
A switch balanced 600 ohms adjustable audio output provides an
interface to an existing In-Plant Paging System. A common application is
to interface to a Gaitronics "GTC" Page Party Phone System. This unit
allows for remote activations of alarm tones, live PA and pre-recorded
messages through the interfaced PA system.
1. Strobe Output Option (-STR)
Controls a string of Strobe Lights of up to 10 amps of
total current draw. Refer to the Strobe Selection
Chart to order the Strobes separately.
2. Solar Power Option (-SP)
Includes solar panels, regulator, 30 feet of power
cable and solar panel mounting bracket(s). Batteries
must be upgraded to 75 AH. Available in 55W, 75W or
100W Solar Panels. Useful when it is impossible or
uneconomical to obtain AC power to run the remotely
located unit.
3. Antenna Surge Protection Option (-ASP)
Used in high lightning areas to protect the Radio's
antenna input. Rated for 50,000 amps IEC.
1. Trunked Radio System Upgrade (-T)
Replaces the standard conventional radio with an 800
or 900 MHz trunk radio that interfaces with an existing
Trunking System.
2. NEMA 4X Enclosure Upgrade (-4X)
Replaces the standard enclosure with a NEMA4X
Stainless Steel enclosure.
Options
Upgrades Specifications
NEMA4 Enclosure
Second
Radio
for Radio
ReBroadcast
Primary
Radio
Controller
Board
ON/OFF
Circuit
Breaker
Temperature
Compensated
Battery
Charger
Wireless
Push
Button
Receiver
Hardwired
Push Button
Monitoring
Board
Reserved for
Batteries
Terminal Strip for
Easywire of AC Input,
Hardwired Push
Buttons and Audio
Output to Speakers
Controller Section
Program Storage
256K Flash memory/100yrs data retention
Addressing
Dip switches for easy address selection
Local Activation
Six pushbuttons for local
testing and activation
Radio Interface
Universal radio interface
and power connectors
Expansion ports
RS485, RS232 and
a second 1600 watt Amplifier
Other Ports
Interface Port for up to
two Digital message Boards
Other Features
Build in AGC circuit, tone generator,
and adjustable audio gain
Active Power without Radio
<100 milliamperes
Standby Power
<4 milliamperes
General
Operating Temperature
-30 C to +85 C
Humidity
0% to 95% Non - Condensing
Standby Operation w/out AC
72 hours
Alarm Operation w/out AC
30 minute duration
Weight
96 lbs
Cabinet
H 30 in. x W 24 in. x D 12 in.
Electrical
AC Input Voltage
120VAC / 240VAC 50-60 Hz
Operating Current
1.5 At 120VAC and 0.8 At 240VAC
Communications
Communications
FSK (Preferred) or DTMF
Radio Output Power
1 - 25 Watt