Table of Contents 1. Arrangement of controls . . . . . .2

Webmasters « back to results for ""
Below is a cache of http://www.beckerautosound.com/pdf_guides/om6806.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Table of Contents 1. Arrangement of controls . . . . . . . . . . . . 2
Table of Contents
1. Arrangement of controls . . . . . . . . . . . . 2
2. Display - Overview . . . . . . . . . . . . . . . . . 3
3. General operation . . . . . . . . . . . . . . . . . 4
3.1. Switching on/ off . . . . . . . . . . . . . . . . . . . 4
3.2. Adjusting the volume . . . . . . . . . . . . . . . . 4
3.3. Sound settings . . . . . . . . . . . . . . . . . . . . 4
Bass (BASS) . . . . . . . . . . . . . . . . . . . . . . 4
Treble (TREB). . . . . . . . . . . . . . . . . . . . . . 4
Balance Volume distribution
left/right (BAL) . . . . . . . . . . . . . . . . . . . . . 4
Linear adjustment (LINEAR) . . . . . . . . . . . . 5
Switching mute function on/off (MUTE) . . . 5
4. Radio operation . . . . . . . . . . . . . . . . . . . 6
4.1. FM operation . . . . . . . . . . . . . . . . . . . . . . 6
4.1.1. Switching on FM modes . . . . . . . . . . 6
Station search FM (FM1, FM2). . . . . . . . . . 6
Scan search FM (SC) . . . . . . . . . . . . . . . . 6
Manual frequency tuning FM (MAN) . . . . . . 6
Requesting/storing FM stations . . . . . . . . . 7
4.1.2. BEST FM (Best Station) function. . . . . 7
4.1.3. FM autostore (AS) . . . . . . . . . . . . . . . 7
4.1.4. RBDS functions. . . . . . . . . . . . . . . . . 8
Programme type ID (PTY) . . . . . . . . . . . . . 8
Programme type scan search (PTY). . . . . . 8
4.2. AM operation . . . . . . . . . . . . . . . . . . . . . 9
4.2.1. Switching on AM modes . . . . . . . . . . 9
AM station search . . . . . . . . . . . . . . . . . . 9
Scan search AM (SC) . . . . . . . . . . . . . . . . 9
Manual frequency tuning AM (MAN) . . . . . 10
Requesting/storing AM stations . . . . . . . . 10
4.2.2. AM autostore (AS) . . . . . . . . . . . . . . 10
5. CD operation . . . . . . . . . . . . . . . . . . . 11
Notes on compact discs (CD) . . . . . . . . . . 11
5.1. Selecting CD function . . . . . . . . . . . . . . . 11
5.2. Inserting/ Ejecting CDs . . . . . . . . . . . . . . 11
Skipping tracks forwards/backwards . . . . 12
Scan function (SC). . . . . . . . . . . . . . . . . . 12
Fast forward/rewind . . . . . . . . . . . . . . . . 12
Displaying relative time . . . . . . . . . . . . . . 12
Random Play (RP) . . . . . . . . . . . . . . . . . . 13
5.3. Temperature Protection Circuit . . . . . . . . 13
6. User menu . . . . . . . . . . . . . . . . . . . . . 14
6.1. Calling up/exiting the user menu. . . . . . . 14
User memory (USER) . . . . . . . . . . . . . . . . 14
Setting Mono/Stereo . . . . . . . . . . . . . . . . 14
Setting the DRIVER . . . . . . . . . . . . . . . . . 15
Telephone mute characteristics . . . . . . . . 15 
1. Arrangement of controls
11
3
4
6
7
8
9
5
2
1
10
12
 %VVERKIQIRX SJ GSRXVSPW
Volume control on / off switch
CD eject button (
1
)
Mute button (
7
)
Sound button (
2
)
Sub-menu selection button (
3
)
CD button (
4
)
FM radio button (
6
)
AM radio button (
5
)
Manual frequency setting button (
9
)
Right rotary control/push button
Multifunction buttons
Display
1
2
3
4
5
6
7
8
9
10
11
12 2. Display - Overview

 (MWTPE]  3ZIVZMI[
Display for radio - FM
BEST station display / memory location number
Abbreviation for stereo - reception
Set station
Abbreviation for active scan search
Display for radio - AM
Memory location number
Set station
Abbreviation for active scan search
Display for CD operation
Current track
Abbreviation for random play
Abbreviation for active scan function
1
2
3
4
1
2
3
4
1
2
3
1
2
3
1
2
3
1
2
3 
3. General operation
 +IRIVEP STIVEXMSR
 7[MXGLMRK SR SJJ
Volume control press on/off button.
With the ignition key.
If the unit was switched off via the ignition, the
unit will switch on, when the ignition is switched
on again. After switching off the ignition, the unit
can be prevented from switching off by pressing
the volume control within 3 seconds.
Note
When the ignition is switched off, the unit can be
switched on by pressing the volume control button,
but it will switch off automatically after 1 hour.
 %HNYWXMRK XLI ZSPYQI
Turn volume control to right / left. The current
volume level appears briefly on the display.
 7SYRH WIXXMRKW
The following functions can be called up:
B A S S ,
T R E B (Treble) and B A L (Balance volume
distribution left/right).
Bass and treble settings (values from -9 to +9) for
the AM/FM wavebands and CD mode are stored
separately. The setting for balance is stored
commonly for all modes (values from -9 to +9).
After 6 seconds without any action, or by pressing
3, 4, 5, 6 or 7, the current setting
can be quit. The new setting is stored.
Bass (BASS)
Press
2 repeatedly until B A S S appears.
Set the desired bass level by turning the right rotary
control/push button.
If the right rotary control/push button is pressed,
the treble level adjustment is accessed.
Treble (TREB)
Press
2 repeatedly until T R E B appears.
Set the desired treble level by turning the right
rotary control/push button.
If the right rotary control/push button is pressed,
the balance adjustment is accessed.
Balance Volume distribution left/right (BAL)
Press
2 repeatedly until B A L appears.
Set the desired balance by turning the right rotary
control/push button.
If the right rotary control/push button is pressed,
the bass adjustment is accessed. 3. General operation

Linear adjustment (LINEAR)
The tone values for the set signal source
(e.g. radio/FM) are set to 0 (mean value) -
L I N E A R .
Press and hold button
2 for more than
4 seconds.
All tone values for signal sources radio and CD are
set to 0 (mean value) -

A L L L I N E A R .
Press and hold button
2 for more than
8 seconds.
Switching mute function on/off (MUTE)
With the mute function, the sound is muted in all
modes and wavebands.
To activate the mute function, press
7.
The mute function is cancelled by pressing
7
again or by turning the volume control. 
4. Radio operation
 6EHMS STIVEXMSR
 *1 STIVEXMSR
4.1.1. Switching on FM modes
The following modes can be set: F M 1 (FM memory level 1) F M 2 (FM memory level 2) B E S T F M (function Best Station) F M A S (FM autostore function)
Press
6 repeatedly until the desired FM mode is
selected.
When changing between the various FM modes, the
last selected station remains set.
Station search FM (FM1, FM2)
The radio searches in descending/ascending order
of frequency.
To activate station search, turn the right rotary
control/push button to the left/right.
Note
The station search can also be started at
F M A S .
Scan search FM (SC)
An automatic station search can be started. The
first run is performed on an insensitive plane, all
further runs on a sensitive plane. Receivable
stations can be heard for 8 seconds.
Press the right rotary control/push button, and the
abbreviation SC is displayed.
Press the right rotary control/push button if you
wish to keep the received program.
Note
Scan search begins at the currently set frequency.
Once the scan begins, it will continue until either a
station or program is retained or until another mode
is selected.
Manual frequency tuning FM (MAN)
To activate manual tuning, press
9.
Set the desired frequency by turning the right rotary
control/push button. The tuning steps for FM and
BEST FM are in 200 kHz increments.
On the left side of the display,
M A N indicates that
manual tuning is active.
To exit the manual tuning feature, press
9 again. 4. Radio operation

Requesting/storing FM stations
Storing: 10 frequencies or programs can be
stored on
F M 1 and on F M 2 .
Press a multifunction button for 3 seconds in order
to store the desired transmitter. A signal tone con-
firms the selection.
Request: Press multifunction button
-
.
The stored station is called up.
4.1.2. BEST FM (Best Station) function
The BEST FM function is a memory that automati-
cally stores stations in order of their signal quality
(reception quality).
This memory is constantly updated.
To call up function BEST FM press
6 repeatedly
until the display shows
B E S T F M .
Once the BEST FM function is activated, the best
station is always displayed to the left of the general
display. Press the right rotary control/push button
in order to select this station.
Transmitters with a better or worse reception
quality can be selected by turning the right rotary
control/push button