color=black> Below is a cache of http://www.jenningstech.com/pdf/cont/rp151b.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Three Phase Vacuum Contactors RP151B Jennings Technology Company • 970 Mc Laughlin Avenue, San Jose CA 95122 • Tel: (408) 292-4025 • Fax: (408) 286-1789 • Web: http://www.jenningstech.com
©Jennings Technology Company. All rights reserved.
Three Phase Vacuum Contactors
RP151B
MODEL RP151B
A small, lightweight 3 phase, normally open, 200 amp
vacuum contactor for use in equipment which requires a
high speed interrupt time. It is useful as an overload
interrupter to 2000 amps RMS interrupting capacity.
Special erosion resistant contacts offer long life without
adjustment or contact maintenance at rated current of
200 amps. Typical test results indicate a minimum
electrical load life of 250,000 operations.
NOTE: Hardened version available.
GENERAL SPECIFICATIONS
Rated Voltage 50/60/400 Hz
600 Volts RMS
Rated Continuous Current
200 A RMS
Maximum Interrupting Capability
Current
2000 A RMS
Interrupt
<2 cycles
Auxiliary
DPDT
Contacts
115/230 VAC/8A
Weight
15 lbs
ACTUATOR SPECIFICATIONS
Pull-in
Hold
Actuator
Current
Current
Model No.
Voltage
(Amps)
(Amps)
RP151134541X44R20
26.5 VIDC
4.0
0.40
RP151B4541X46R20
100 VDC
1.5
0.05
RP151B4541X47R20
115 VACR
1.5
0.05
50/60/400 Hz