olor=blue>
www.stagecraftindustries.com FeAtures

Portland, or:
503-286-1600

Seattle, Wa:
206-763-8800
www.stagecraftindustries.com
FeAtures
A 3PH disconnect designed specifically for
entertainment industry applications
NEMA 4 enclosure standard for either indoor
or outdoor use
100% equipment rated, continuous duty, electronic
trip circuit breaker; breaker features microprocessor
for adjustable trip release
Spring loaded safety guards protect each
connection point
Equipped for OHSA Lockout/Tagout
Industry standard cam type or Posi-lok
®
receptacles
Copper buss bars throughout unit
Available with either conventional or isolated ground
First make, last break warning prominently displayed
Safety interlock prevents internal access while
receptacles are energized.
Double neutral receptacles for non-linear loads
in entertainment lighting.
AppliCAtions
Auditoriums, Performing Arts Centers, Studios
Theaters, Conference Centers, Ballrooms
Exhibition Halls, Arenas, Casinos, Churches
Codes
UL and cUL Listed and Labeled
Meets NEC requirements outlined in:
Article 384Switchboards and Panelboards
Article 520Theaters, Audience Areas of Motion Picture
and Television Studios, and similar locations
Article 530Motion Picture and Television Studios
and similar locations
ApproVAl
Job name ___________________________________________________
Job number _________________________________________________
Location ___________________________________________________
Date ______________________________________________________
Approved by ________________________________________________
options
Cabinet lock to secure access
Pigtail tie-in sets
Amp meter
model #
desCription
600-400-C
400A, (6) Cam output receptacles
600-400-C/BW
400A, (6) Cam receptacles, (6) lugs for bare wire connection
600-400-P
400A, (1) Cooper Crouse-Hinds
®
Posi-lok Panel with
(6) receptacles
The enclosures for all standard products are 24" W x 36" H x 9" D
Approximate shipping weight 175 lbs
400A CompAny switCh - entertAinment industry power pAnel
series 600 - 120/208VaC, Four Wire + Ground
Stagecraft Industries, Inc.
t e C h n i C A l d A t A s h e e t
Series
600-400a
|
4.6.06 www.stagecraftindustries.com
Portland, or:
503-286-1600 |
Seattle, Wa:
206-763-8800
speCiFiCAtions
1. The Company Switch shall be a specialized power distribution panel
for the connection of portable electrical equipment in theaters,
auditoriums and other entertainment venues.
2. The Company Switch must satisfy the requirements of NFPA 70
(National Electric Code) Article 384Switchboards and Panel-
boards, and Article 520Theaters and Studios. Output panel
connectors must specifically comply with Article 520-53(k) for
Single-Pole Separable Connectors and Article 300-20(b), Induced
Currents in Metal Enclosures. The entire assembly must be UL
listed and labeled.
3. The Company Switch shall be a 24" W x 36" H x 9" D, NEMA 4,
wall mounted enclosure constructed of 14 gauge steel finished
with a black epoxy coating.
4. The main breaker shall be a UL listed, 100% equipment rated,
continuous-duty circuit breaker utilizing a microprocessor-based
over-current protective trip system. It shall have a CSA/UL short-
circuit interrupting rating of 65kA at 240VAC. Breakers with AIC
ratings of up to 200kA shall be available as an option.
5. All connections from the main breaker and the input lugs to the
outlet receptacles shall be made with copper buss bar. The
grounding connection shall be made to the main cabinet frame.
Cabinets can be factory wired to provide an isolated ground.
Service input to the cabinet shall be 120/208 VAC, three phase,
4 wire + ground. Wire size for contractor connections shall be
single runs of 250 MCM to 500 MCM for each line connection
and single runs of #6 to 500 MCM for each neutral and ground
connection. Double lugs for parallel feeds of #3/0 to 250 MCM
wire for each line connection shall be available if requested at
time of order.
6. Phase indicator lamps shall be mounted in a clearly visible location
on the front panel of the enclosure. A safety interlock mechanism
shall prevent the door to the enclosure from being opened if the
breaker is on. An additional locking mechanism shall allow a
padlock or lockout tag to secure the breaker in the OFF position.
An optional keyed lock shall be available in place of the latch
securing the enclosure door.
7. The NEC mandated warning advising the proper sequence for
connecting and disconnecting single pole separable connectors
shall be permanently printed on the front of the enclosure.
8. The Company Switch shall be Hi-Pot tested at 1250VAC for
no less than 10 seconds.
9. Provide non-ferrous output panel at the bottom of the enclosure
with one of the following options:
-C (6) Panel Mount Receptacles (Cam-lok E1016 or equal) with
snap-back covers.
-C/BW (6) Panel Mount Receptacles (Cam-lok E1016 or equal)
with snap-back covers and (6) internal lugs for bare-wire cable
connections with individual strain relief fittings for each load cable.
-P (1) Posi-lok Output Panel (Posi-lok E0400) sequential
interlock receptacle panel with (6) color-coded receptacles
10. Provide a quantity of __ Model #600-400-x Company Switches as
manufactured by Stagecraft Industries, Inc. or approved equal.
Posi-lok and Cam-lok are registered trademarks of Cooper Crouse-Hinds.
C (6) Panel Mount Receptacles (Cam-lok E1016 or equal) with
snap-back covers.
C/BW (6) Panel Mount Receptacles (Cam-lok E1016 or equal) with
snap-back covers and (6) internal lugs for bare-wire cable connections
with individual strain relief fittings for each load cable.
P (1) Posi-lok Output Panel (Posi-lok E0400) sequential interlock
receptacle panel with (6) color-coded receptacles
model #
desCription
600-400-C
400A, (6) Cam output receptacles
600-400-C/BW
400A, (6) Cam receptacles, (6) lugs for bare wire connection
600-400-P
400A, (1) Cooper Crouse-Hinds Posi-lok Panel with (6)
receptacles
Stagecraft Industries, Inc.
t e C h n i C A l d A t A s h e e t
Series
600-400a
|
4.6.06
400A CompAny switCh - entertAinment industry power pAnel
series 600 - 120/208VaC, Four Wire + Ground