steel disc with 1/2 screw welded to it, permitting about 1 of vertical
movement. It is the same diameter as the table leg and finished the same,
so when the Plate Leveler is screwed all the way in or just slightly adjusted
as in the photo here, the viewers eyes tends to see leg and leveler as one;
psychologically, one merges both. Try it. The Plate Leveler adds an elegant
tough to any table leg.
Casters
Casters add a different finishing touch to legs, now that
such a variety of industrial and design casters are available.
We can use your casters or ours. Here are two concepts.
Dont they look great, each in its own distinct way?
Ingram/Larimore Sabots
Designed by: Robert Ingram, Jack Larimore
- Philadelphia, PA
A whole new dimension to finishing a leg. Now, one can continue a
line used elsewhere in the table or in the room design. Or, one can
use sabots as a statement to emphasize the leg or draw a viewers
eye lower in the overall perspective.
Available in a variety of woods. Sabot come in two heights and
shapes shown here, unfinished. Four week delivery
Note: No vertical adjustment
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
Furniture Legs
Leg
shorter taLLer
Diameter ht x Wdth ht x Wdth
3
1 x 4-1/8 2 x 4-7/8
4
1 x 5-1/8 2 x 5-7/8
6
1 x 7-1/8 2 x 7-7/8
Width
Leg
Diameter
Leg
Diameter
Leg
Diameter
Width
Width
Donut
BeLL
Cone
Sabot dimensions
1
2
3
tL27W 27
4 10 sq.



6
12 sq.
tL28W 28 - 1/2
4 10 sq.



6
12 sq.
tL34W 34 - 1/2
4
10 sq.



6
12 sq.
Furniture Legs
178
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
tLw Series
Designed by Peter Stathis
- San Francisco, CA
Peters been noodling on how to best incorporate wire
management into our line of table legs for quite some time now.
He has triumphantly come up with several viable solutions to
handle the wires. One leg incorporates a 1 1/2 hole in the top
plate of the leg. The plugs and cords can go through your desktop
via one of our fine grommets placed directly above the center of
the leg. The wires will go through the leg to the bottom and exit
via a mousehole. Good-bye wires, good-bye problems. Hello, fine
solution.
Or, the wires can enter this leg from a 1 1/2 diameter hole at the
top of the tube, then drop down to the mousehole exit.
Comes 4 or 6 diameter by 27, 28 1/2 high and 34 1/2 or any
other height available. Plate leveler available. Call for pricing.
Finishes: Polished Chrome (26), Satin Chrome (26D), Matte Black
(90), Custom.
tLRUL Series, Rubber Leg
Thats right a Rubber Leg! This contemporary design steel leg has a taut seamless
rubber cover instead of a plated or painted finish. The look is elegant. The texture is,
well, rubbery. The overall effect is amazing.
When you want something different, try the Rubber Leg: its the ultimate contemporary
expression.
One size only, 27 tall by 3 1/4 diameter.
Finish: Black only (90). Furniture Legs
179
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
tLWh27
tLWh34
tLwH - whitley Leg
Designed by: Chip whitley
- Alexander City, AL
An exciting and provocative design of welded steel plates giving an
illusion of curves; perfect for ultra-contemporary tables, or perhaps
even 50s designs? As Mr. Whitley explains:
The design of the leg is somewhat a contradiction of form. Flat
planes combine to give a sense of a solid curving leg. Visual interest
is increased by the negative space between the plates, which provide
strength and define the form.
Available now in 34 1/2 (TLWH34)
and 27 1/8 (TLWH27) heights.
Finishes: Matte Black (90)
or Crystalite Chrome (26C).
Custom finishes available. Furniture Legs
180
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
tLRAL Series, Roma Leg
We call this beauty the Roma Leg because its fine design and unique action reminds us of the best
furniture components from Italy.
The neat concept about this 3 1/4 diameter leg is that it easily adjusts as much as 6 vertically, from 27
to 33. Just rotate the barrel, move the leg up or down to the right height, and twist the barrel closed.
Though the leg adjusts higher, weve found it is far more stable with less height adjustment. A great leg
for lightweight use.
Thats a lot of adjustment in one good lookin leg. Best of all, it can solve several height problems you
may encounter in one job. You may need 27 on the office desk, 29 on the dining table, and 33 on the
wheelchair accessible table. Roma Leg does them all!
Takes five seconds to change height. Its that easy. Change height as often as you want, effortlessly.
Available in smooth or serrated tube.
Smooth tube finishes: Polished Chrome (26),
Matte Black (90), Satin Chrome (26D), Unfinished (U), Custom.
Serrated tube finishes: Satin Aluminum (94),
Matte Black (90).
Smooth
Serrated
6-1/4"DIA.
3-1/4"DIA.
12"
26"
1-5/8"
3/4"
1/2"
TLRAL Furniture Legs
181
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
Add a surprising splash of color to the extaordinary
design of the Fields Leg for a dramatic effect
tLF Series, the original Fields Leg
Designed by: Robert Fields - walnut Creek, CA
Unlike other table legs that are formed from rolled steel, the beauty of Mr. Fields design is it is brake-formed from
a flat piece of 10 gauge steel. The delightful scalloped pattern is cut, then the metal is bent to a 90 degree angle.
Simple and stylish.
Both inside and outside of the leg is finished, and the Fields leg can be mounted in any direction. Thats just one
more aspect of its beautiful design.
Another part of the design are the four holes through which you can put your own finishing touches. We provide
Polished Chrome cap nuts as shown.
Made to order, 6-8 weeks to make. Adjustable glide standard.
tLm Series, milano Leg
Introduced in 1990, the Milano Series leg is some 20% cheaper than
our regular table leg. No wonder it became an instant hit!
It is made of 18 gauge steel, 3 1/8 diameter and 27 tall with a
7 1/4 top plate that gently radiuses into the leg. Looks great from any
angle. The pleasantly rounded leveler seats flush with the diameter
of the leg and unscrews for 1 height adjustment. All top plates and
levelers are black ABS plastic, contrasting or complementing the leg.
Compare with our regular round legs and youll agree - these are
Great Lookin Legs at really great prices.
Finishes: Polished Chrome (26), Satin Chrome (26D), Matte Black
(90), Unfinished (U), Custom. Furniture Legs
182
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
oval Leg
The Oval, a softer slimline
design that looks great with
contemporary furniture.
Oval is 2 9/16 X 4 oval by 27
tall: other sizes also available.
Made to order, 6 weeks delivery.
Finishes: Polished Chrome (26),
Satin Chrome (26D), Matte Black
(90), Unfinished (U), Custom.
Square Leg
The Square has a commanding presence with gentley
radiused edges and is seamless. Available in 3, 4 and 6
by 27 tall; other sizes also available. Made to order, 6 week
delivery.
Finishes: Polished Chrome (26), Satin Chrome (26D), Matte
Black (90), Unfinished (U), Custom.
Contrast Leg
Designed by: Peter Stathis
- San Francisco, CA
Dichotomous elements of smaller
square tube into larger round one,
finished differently for contrast. Three
allen screws for adjusting. Each
is custom made. Allow 6 -8 weeks
delivery.
Size to your needs: 25 to 33 high,
round tube can be 3, 4 or 6. Furniture Legs
183
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
Satin
Polished
Cross section
tLFAeX
Designed by: Robert Fields
- walnut Creek, CA

This exciting leg design is all angles and subtle light reflections.
Extruded from aluminum and then polished or plated, it offers a
most unusual design that will make any contemporary table or
desk shine. If you want to make a statement, this is it!
Size is 3 square and 27 tall though we can make it any height
you want.
Note the channels act as wire management, and we offer an
optional press fit extrusion to conceal wiring.
Finish: Polished Aluminum (100) or Satin Anodized (94),
other finishes available.
wood
Genuinely Great Lookin Legs!. Made of Genuine
Wood Veneer, not some cheesy, paper-wrapped or
vinyl-wrapped replica.
Standard species are Maple, White and Red Oak,
Mahogany and Walnut. Most other species also
available. Comes in 5, 7 diameter by 27 tall, though
most other sizes can be accommodated.
6-8 weeks delivery. Furniture Legs
184
www.moCkett.Com 24/7 oRDeRIng 800-523-1269
tLkBP
Smooth textured rubber covered steel base has a black pebble
finish for a subtle effect. Base disc measures 22. Height range is
the same as TLKAP.
Finishes: Satin Aluminum (94)
or Matte Black (90). Both with Matte Black base.
tLkAP
An aluminum disc covers a steel
weighted base, is 20 in diameter
and finished to a high polish. With
this base the leg adjusts from
27 1/4 to 36 and locks in place
with allen screws. Table tops of up
to 42 diameter can be placed atop
this fine design.
Finishes: Satin Aluminum (94)
or Matte Black (90). Both with
Polished Aluminum base.
A heftier, good looking Kyros leg, popular because of its adjustability.
Features heavier duty round tube diameter of 4 13/16, massive adjustable
interior tube 3 3/8 square.
kyros Plus Pedestal Leg/Base tLk Series, kyros Leg
There is something very sensual about extruded
aluminum, an effect and feel one does not get from
cold rolled steel. Call it a softness, perhaps, that
aluminum has and steel does not. Plus, the Kyros
has serrations all around which add to it