font face=arial size=-1 color=blue>
« back to results for ""
Below is a cache of http://www.frco.com/home/library/articles/controlengr/controlengr0801_aes.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Advanced Technology Exceeds Expectation
January 2008
Covering control, instrumentation, and automation systems worldwide
Vol. 55 No. 1
The new production line
at Advanced Elastomer
Systems plant in Can-
tonment, FL, is now a
model of best practices
for the company.
David DeBari
Advanced Elastomer
Systems
Commissioning time reduced by three weeks, HMI greatly improved, and
operators say new production line runs best.
Advanced
Technology

Exceeds
Expectations
Editors note: This account is a first-person expe-
rience, written by the engineer who was personally
involved in the plant improvements, hence the occa-
sional personal references.
U
sing smart field instrumentation and
bus-oriented plant architecture contrib-
uted to the timely startup of a new ther-
moplastic elastomer (TPE) production
line for Advanced Elastomer Systems,
L.P. (AES), in Cantonment, FL. AES, an ExxonMobil
Chemical affiliated company, had set corporate
objectives for the new line that included improved
equipment reliability, reduced maintenance costs,
and easier operation with maximum output.
Despite falling behind on the project schedule
due to two very active hurricane seasons, plus the
resource and people drain in the aftermath of hurri-
cane Katrina, we recovered some lost time through
wiring efficiencies and fast startup. The original
plan estimated a four-week instrumentation com-
missioning period, but that was reduced to just
eight days.
AES added the new production line as part of
an expansion designed to maintain its position as a
leading supplier of TPEs with approximately 30%
of the worldwide market. Global demand for these
elastomers is expected to grow at about 6.4% annu-
ally through 2007, according to a 2003 study by the
Freedonia Group, Inc.
Advanced control technologies were specified
to take advantage of the diagnostic
capabilities of intelligent field instru-
mentation as well as installation
efficiencies of bus architecture. For
example, F
OUNDATION
Fieldbus net-
works, AS-interface for discrete I/O,
and Ethernet/IP were implemented
using Emersons PlantWeb digital
plant architecture. For the most part,
the fieldbus network eliminated the
jumble of wiring and large junction
boxes of traditional distributed con-
trol systems. As a result, control sys-
tem wiring costs on this project were
reduced by approximately 15%.
We realized additional benefits
during the commissioning, startup,
and operational phases. As previously Posted from Control Engineering, January 2008. Copyright © Reed Business Information, a division of Reed Elsevier, Inc. All rights reserved.
Page layout as originally published in Control Engineering has been modified.

#1-23248396 Managed by The YGS Group, 717.399.1900. For more information visit www.theYGSgroup.com/reprints.
INSIDE

PROCESS
indicated, the time required to install and com-
mission some 300 smart devices was shortened
by approximately three weeks, partly because the
instruments arrived from the vendor already config-
ured and network-ready, so very little troubleshoot-
ing of individual devices was necessary as they
were ready to plug in and test.
Advantages of asset management
Using an asset management application to com-
municate with field instruments for commissioning
saved us a significant amount of time. Formerly, a
multi-craft team would have to locate each device in
the field, check wiring, and communicate by radio
with the control room to verify each control loop.
Using Emersons AMS technology, however, a single
technician was able to communicate directly with
each instrument from the control room, confirm that
devices functionality with an observer in the field,
and move on to another device without anyone hav-
ing to open instrument covers or an I/O cabinet. As
a result, a smaller group of AES technicians was able
to complete loop checkout in record time.
The fieldbus system worked well from the very
beginning. There have been no calibration issues, a
fact which in itself exceeded our expectations. Opera-
tors attribute this in large part to the versatility of the
asset management application.
The same software now monitors these devices
for maintenance purposes. If the condition of a
device or associated equipment falls below certain
predetermined limits, a status alert lets line opera-
tors know there may be a problem and a technician
can investigate further online without ever going
out to look at the device. Frequently, our personnel
can determine directly from the interface whether
a device is reporting correctly and, if not, what is
causing the problem. The ability to view device sta-
tus and diagnostics is what sets this technology apart
from traditional, process-of-elimination troubleshoot-
ing procedures. It provides actionable information
that simplifies device maintenance, equipment avail-
ability is greater, production is more reliable, and
output is maximized. This has helped us to achieve
some of the stated objectives for the new line.
Those objectives are further supported by the
new digital plant automation system, which is
designed to complement and work with the smart
field devices on the bus networks to control the pro-
duction process. It uses automated control design
that is a generation beyond the legacy distributed
control systems that operate the existing TPE pro-
duction lines in this plant. Not wanting to copy
existing operating procedures (and thus perpetuate
known deficiencies of those systems), our people
worked hard to understand the new technology
and learn how best to apply it to the requirements.
When it came down to specifics like the order of
events, temperature and flow parameters, as well as
control monitor graphics, we relied on the experi-
ence of the operators who would run the system.
Operators love new HMI
The DeltaV automation system features functional-
ity that is frequently described as awesome. The
operator interface is the most informative and the
easiest to use of any in this plant. Since plant opera-
tors may be assigned to any of the production lines
in the plant, they must be trained and capable of
working with both systems. Some operators were
resistant to the change because they felt the new
system would be more complicated and more dif-
ficult to operate, but they found the opposite was
true. After moving from one line to another, most of
our operators agree that this new system is the best
and have become true believers.
We began the commissioning process early in
June 2006, and the line first produced test mate-
rial in July. After completing an extensive internal
certification process, material for shipment and
sale was available in early October. Due to startup-
related process equipment issues during this time,
we needed more onsite support from the control
system vendor than originally anticipated. Emerson
exceeded our expectations, providing very capable
assistance.
Things have operated smoothly since startup, with
only three incidents requiring instrument trouble-
shooting. The diagnostics capability of AMS device
manager shortened that process, because it enabled
our maintenance staff to pinpoint each of the prob-
lems quickly. One field device failed very early, and
in the other two cases, wire terminations had loos-
ened. In each case, the problems were easily identi-
fied and corrected without affecting production. Our
maintenance technicians are very impressed with
this technology, although the reliable equipment on
the new production line has not given them much
cause to use it.
AES believes this unconventional architecture
is the way of the future. The diagnostic capabili-
ties and ease of working with the control system,
coupled with excellent field instrumentation, have
attracted many positive responses at this plant. If
Advanced Elastomer Systems builds another new
TPE production facility, these technologies repre-
sent the best practices that we will likely imple-
ment.
ce
David DeBari, is senior process engineer for
Advanced Elastomer Systems. Reach him at david.
debari@santoprene.com.
For more information, visit:
www.as-interface.net
www.emersonprocess.com
www.fieldbus.org
www.odva.org
www.santoprene.com