rap> « back to results for ""
Below is a cache of http://www.geotechenv.com/ac_sipper.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Hydrocarbon Recovery Systems
Hydrocarbon Recovery Systems
Geotech AC Sipper
The Geotech AC Sipper is a Single-Phase, 110-220V AC, powered remediation system, designed for recovery applica-
tions where electrical power is available. The compact, easy to install features make this unit an industry favorite!
Unlike other AC powered pumping systems, which use a standard bladder pump operated by an air compressor,
the AC Sipper uses a unique vacuum/pressure canister pump to recover hydrocarbons through a floating
oleophilic/hydrophobic intake filter. When the pump canister is filled, the pump reverses, pressurizes the system and
pumps the recovered fluid to the surface and into a storage vessel.
The Geotech AC Sipper can effectively extract fluids from depths to 180 feet below ground surface and recover
viscous hydrocarbons such as 90 weight oil when a fixed intake is utilized.
Geotech Environmental Equipment, Inc.
2650 East 40th Avenue Denver, Colorado 80205
(303) 320-4764 (800) 833-7958 FAX (303) 322-7242
email: sales@geotechenv.com
website: www.geotechenv.com
AC Sipper.qxp 06/11/08
OPERATION
The Geotech AC Sipper recovers floating hydrocarbons
(LNAPL) from wells using a AC powered pump. The system
utilizes a density float skimmer with a 60 or 100 mesh screen,
or specific gravity float, depending on the application. The
skimmer floats just above the oil/water interface to collect and
remove hydrocarbons from the well into the optional above
ground storage tank.
The Geotech AC Sipper is also available for recovery of sink-
ing product (DNAPL) from wells when using a fixed intake.
CONFIGURATION
Control Panel with:
NEMA 4 Enclosure
Tankfull Shut-Off Switch (2 inch NPT bung-fitting)
Microprocessor Controller with alpha-numeric
vacuum fluorescent display
On/Off Switch
Pressure/Vacuum Pump
Pressure/Vacuum Gauge
Skimmer Assembly with:
2" or 4" Intake
Downwell Collection Canister
2" or 4" Slip Fit Well Cap
Air and Discharge Tubing, 100' of each
Options include:
55 Gallon Steel Product Drum
Dual Containment Product Tank
Additional Air and Discharge Tubing
Power Cable Lead
Screened Skimmer Assemblies
Wall Mount Kit
Pole Mount Kit
Control Panel
Canister and 2" & 4" Skimmers
Optional 2" Screened Skimmer Assembly
CALL GEOTECH TODAY (800) 833-7958
AC Sipper Maximum Recommended Vacuum Times
AC Sipper Time to Discharge (based on #2 Diesel)
GO TO WWW.GEOTECHENV.COM Hydrocarbon Recovery Systems
Geotech AC Sipper
CALL GEOTECH TODAY (800) 833-7958
Geotech Environmental Equipment, Inc.
2650 East 40th Avenue Denver, Colorado 80205
(303) 320-4764 (800) 833-7958 FAX (303) 322-7242
email: sales@geotechenv.com
website: www.geotechenv.com
SPECIFICATIONS
EXHAUST
TANKFULL
PROBE
DISCHARGE
HOSE
RECOVERY
TANK
WELL CAP
AIR
IN
WELL 2" OR LARGER
CANISTER
SKIMMER ATTACHMENT
INTAKE
EARTH
HYDROCARBONS
WATER
FUEL
TO AC
POWER SOURCE
CONTROL
PANEL
Applications
2" (5.8cm) or larger recovery wells
Recovery Rate
.2 gallons (.750 ml) per cycle
Max. Operating Depth
180 feet (54.86m)
Power Requirements
120V AC, 1 amp
(240V AC/.5 amp option available)
Max. Pressure
100 PSIG
Max. Vacuum
20" HgV @ MSL
Oil/Water Separation
Oleophilic/hydrophobic mesh screen
Controller
Size:
7" D x 17.4" L x 14" W
(18cm D x 44.2cm L x 35.6cm W)
Approximate Weight:
26.2 lbs
Rating:
NEMA 4
Down Well Collection Canister
Size:
23.5" L x 1.75" OD
Weight:
4.5 lbs.
Materials:
303 and 304 Stainless Steel,
flexible tubing PVC and Brass
Skimmer Assembly
2" Model
4" Model
Effective travel range:
12"
24"
Size:
35.5" L x 1.75" OD
35.5" L x 3.75" OD
Weight:
1.75 lbs.
2.25 lbs.
Operating Temperature: 32º to 100º F
Materials:
304 Stainless Steel, Polyethylene,
PVC, Polypropylene, Brass
Tubing Sizes:
Air:
.17" ID x .25" OD
(4.318mm ID x .35mm OD)
Discharge:
3/8" ID x 1/2" OD
(9.525mm ID x 12.7mm OD)