> Below is a cache of http://www.wiremold.com/shared_content/pdf/ed1391.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Vista Wireless Access Point Enclosure (VLWAP) Product Specifications
Wireless
Infrastructure Solutions Superior signal access. Vista Wireless Access Point com-
partment is located 72 inches above the floor to allow for
superior radio signal propagation. Reduced signal interference. Tempered glass panels (gray
tint) front and rear, conceal and protect the access points
antennae without compromising signal performance. Security. Front glass panel is hinged and lockable for
accessibility and security. Large capacity compartment. 17 1/2" high x 7 1/4" wide
x 2 1/2" deep interior provides space for most leading
manufacturers AP products. Multiple mounting options. User-configurable mounting
system, with supplied brackets and strap hardware,
supports a wide variety of mounting configurations. Convenient termination point. A Wiremold Open
System Communication bezel at the compartment top
provides a convenient network cabling termination point. On-board power supply. 20A duplex receptacle in
compartment base provides a 120V power supply
option for installed devices. j
Listed.
Vista
®
Wireless Access Point Enclosure (VLWAP)
for Open Space Applications
Features & Benefits
A
n open space solution is now available
for mounting wireless access point units
in Vista architectural columns. The Vista
Series provides a means for integrating the
access points necessary for wireless connectivity
into a buildings communications infrastructure.
Access points installed in a Vista column can be
located throughout an office space to provide
optimal WiFi signal coverage in a secure,
yet accessible, environment having built-in
connectivity and power options.
In addition to the new in-stock product, the
wireless access point enclosure is also available
as an option with many of the large frame
Vista column configurations to take advantage
of the full range of Vista aesthetic and
functional capabilities.
For more information on custom configurations,
consult the factory.
In-Stock Vista Architectural Column
with Wireless Access Point Enclosure
in a typical office installation.
Interior view shown with
wireless access point (sold
separately) installed.
ED1391 March 2005 For latest specs visit www.wiremold.com 2
Item
Description/Specifications
VLWAP
Vista Wireless Access Point Enclosure Vista solution for mounting wireless access points. Large
frame Vista with anodized round end channels and center panels. Furniture feed style access,
10'6" [3.2m] tall. Has tempered glass panels to conceal access point. Front panel is hinged and
lockable. Compartment measures 17 1/2" x 7 1/4" x 2 1/2" [445mm x 183mm x 64mm].
Wireless Access Point Enclosure
126"
[3200mm]
72"
[18.29mm]
18"
[457mm] 3
Item
Description/Specifications
Round End Channel
6000 Series, tempered aluminum.
Satin anodized finish or painted.
Channel snaps onto frame.
Item
Description/Specifications
Square End Channel
6000 Series, tempered aluminum.
Satin anodized finish or painted.
Channel snaps onto frame.
FRAME OPTIONS
Custom Configurations
FRAME OPTIONS
V F
L
Size:
Large = L
Prefix:
Frame = VF
End Channel:
Round = 66
Square
= 77
End Channel &
Panel Color:
Style:
Furniture
Feed:
= FF
For more system options,
contact your Wiremold
sales representative.
Design your own
Vista Architectural Column
online at
www.wiremold.com/vista
Continue on to the next page to design the Center Panel.
3 13/16"
[97mm]
2"
[51mm]
Device/Bezel
Color:
Light Gray
= GY
White
= WH
Ivory/Light
Almond
= IV
Black
= BK
No Device/
Bezels
= ZZ
Ortronics Series II or
TracJack Bezels
= RT
Pass & Seymour Activate
and Open System
Communications Bezels = CM
RT and CM options include one each
electrical device plate with spec grade
duplex receptacle(s), single 120V
circuit and communications plate
with bezel(s) installed.
Duplex receptacles are located at
27" [686mm] above the finish floor.
Communications modules are located
at 21" [533mm] above the finish floor.
Height accommodates maximum 10' [3m] ceiling, see page 7 for Extension Kit.
COLOR REFERENCE
CODE
White
= 3333
Black
= 9999
Ivory
= 5555
No Color Anodized Aluminum
= 2345
Warm White Steelcase 4700
= 3136
Moss Steelcase 4722
= 5169
Lt. Tone Herman Miller LT
= 2486
Mist Steelcase 4606
= 5895
GSA Lt. Blue GSA 25183
= 5911
Woodrose Steelcase 4601
= 6137
Slate Steelcase 4726
= 6142
Light Blue Shaw Walker A751
= 1988
Greytone Haworth G
= 2884
NOTE:
Send in a color chip. Most colors
can be matched.
3 13/16"
[97mm]
2"
[51mm]
For custom configurations, please select from the following options:
W
Wireless
Access
Point = W 4
Catalog No. / Item
Description / Specifications
VLRT*
Device Cover
Contains three mini
adapter bezels for
Ortronics Series II
or TracJack (shown).
VL3D
m
* Device
Cover Has three
cutouts for duplex receptacles.
Includes mounting brackets.
Catalog No. / Item
Description / Specifications
VLCM* Device
Cover
Contains three mini
adapter bezels for
Pass & Seymour
Activate inserts and
open communications.
VLFF*
Furniture Feed Plate
Includes two concentric 1"
and 3/4"[25mm and 19.1mm]
KOs, and two multiple
twistout mouse holes.
One furniture feed plate is
installed on the assembly
ADD-ON PLATES
* Refer to the list of colors on page 4 for the four-digit code number.
m
Add C prefix to catalog number to denote Canadian version Agency approved for sale in Canada.
d
DEVICE PLATE PART NUMBER
Plate Color:
Refer to color list
on page 4, enter
4-digit code
Base:
Enter Catalog
Number from
above choices
Bezel Color:
Light Gray
= GY
White
= WH
Ivory/
Light Almond
= IV
Black
= BK
No Device/
Bezel
= ZZ
(furniture feed option only)
ORT
P&S
OPEN
ORT
P&S
OPEN
6"
[152mm]
9 1/4"
[235mm]
6"
[152mm]
9 1/4"
[235mm]
6"
[152mm]
9 1/4"
[235mm]
6"
[152mm]
9 1/4"
[235mm]
For more system options,
contact your Wiremold
sales representative.
Design your own
Vista Architectural Column
online at
www.wiremold.com/vista
NOTE: Send in a color
chip. Most colors
can be matched.
Custom Configurations
(continued) 5
EXTENSION KIT OPTIONS
V E
Size:
Large = L
Prefix:
Frame = VE
Shape:
Round = 66
Square = 77
End Channel
Finish:
Height:
24" [610mm] = 24
60" [1.525m] = 60
Panel Finish:
COLOR REFERENCE
CODE
White
= 3333
Black
= 9999
Ivory
= 5555
No Color Anodized Aluminum = 2345
Warm White Steelcase 4700
= 3136
Moss Steelcase 4722
= 5169
Lt. Tone Herman Miller LT
= 2486
Mist Steelcase 4606
= 5895
GSA Lt. Blue GSA 25183
= 5911
Woodrose Steelcase 4601
= 6137
Slate Steelcase 4726
= 6142
Light Blue Shaw Walker A751 = 1988
Greytone Haworth G
= 2884
NOTE:
Send in a color
chip. Most colors
can be matched.
For more system options,
contact your Wiremold
sales representative.
Design your own
Vista Architectural Column
online at
www.wiremold.com/vista
Extension Kit
Accommodates ceiling
heights greater than
10' [3m] to 15' [4.5m].
Includes hardware for
attaching to main
section. Round or
square shapes
available. includes
a center panel.
Custom Configurations
(continued) 6
* Capacity range is calculated at 40% of raceway area as stated in a proposed revisions to the Commercial Building Standard for
Telecommunication Pathways & Spaces, EIA/TIA-569. Actual wire fill capacity may vary based on applications, cable types, and number,
as well as type of fittings. (Fittings may cause additional variances to the fill capacity.)
Capacity of
WIRE SIZE THHN/THWN
Compartment
6 AWG
8 AWG
10 AWG
12 AWG
14 AWG
One End Channel
Round or Square
7
9
16
26
35
Center (Large)
28
36
64
104
140
One Extension
Round or Square
4
6
10
16
22
Vista Wire Fill Capacity for Power
Overall Dimensions
ROUND
SQUARE
3 25/32"
[96mm]
13 3/8"
[340mm]
Large
3 25/32"
[96mm]
13 3/8"
[340mm]
Large
CABLE/WIRE
O.D.
ONE SQUARE
ONE ROUND
LARGE
SIZE
Inches
[mm]
END CHANNEL
END CHANNEL
CENTER
UNSHIELDED
Cat 3, 2-pair, 24 AWG
0.140
[3.6]
190
150
80
TWISTED PAIR
Cat 3, 3-pair, 24 AWG
0.150
[3.8]
165
131
68
Cat 3, 4-pair, 24 AWG
0.190
[4.8]
103
81
44
Cat 3, 25-pair, 24 AWG
0.410
[10.4]
22
17
8
Cat 5e, 4-pair, 24 AWG
0.220
[5.6]
77
61
32
Cat 6, 4-pair, 24 AWG
0.250
[6.3]
59
47
24
SHIELDED Type1 22
AWG
0.390
[9.9]
24
19
8
TWISTED PAIR
Type 2, 22 AWG
0.465
[11.8]
17
13
4
Type 3, 24 AWG
0.245
[6.2]
62
49
24
COAXIAL
RG58/U, 20 AWG
0.195
[5.0]
98
77
40
RG58/U, 22 AWG
0.242
[6.1]
63
50
24
RG6/U, 22 AWG
0.242
[6.1]
63
50
24
RG6/U, 18 AWG
0.270
[6.9]
51
40
20
TWINAXIAL
100 Ohm
0.330
[8.4]
34
27
12
FIBER OPTIC
0.180
[4.6]
103
81
44
Vista Series Wire Fill Capacity for Communication 7
Notes © Copyright 2005 The Wiremold Company All Rights Reserved
Wiremo