670
studentservices@sb-reb.com
Locomotive Electrical
B K G P 3 8 E
EMD Locomotive Service Manual (GP38 with Static Excitation)
This book not available separately
G P 1 F C
EMD GP38 Static Excitation Loco. Maint.Elec
$ 3 0 9 . 2 5
Item Code
Full Course Title
P r i c e
Item Code
R e q u i red Tex t b o o k
G P. 1
Static ex c i t a t i o n
G P. 2
Excitation system
G P. 3
Transition control system
G P. 4
Dynamic braking system
G P. 5
Inspection and replacement of contact tips
G P. 6
Electrical equipment
G P. 7
Reference voltage checks
G P. 8
Testing and setting performances control panel PCP-8411758
G P. 9
Wheel slip control system testing and setting
G P. 1 0
Transition control system testing and setting
G P. 1 1
Dynamic braking system testing and setting
G P. 1 2
Load test and horsepower standardization
G P. 1 3
General rev i ew
Item Code
Lesson Description
Course Objective: Learn the description of the electrical transmission
and the power control system used on the GP38 locomotive for static
control of main generator excitation. Testing, servicing, troubleshooting
and maintenance are included.
Who this is for: Electric locomotive maintenance personnel, appren-
tices or others responsible for the repair of static excitation locomo-
tives.
EMD-GP38 Static Excitation
Locomotive Maintenance-Electrical
Enrolled students may take individual lessons.
Please contact student services for individual lesson and textbook pricing. www.
Railway
Educational
Bureau
.com
109
Locomotive Electrical
L S 1 F C
EMD SD45 Locomotive MaintenanceElectrical
$ 3 4 4 . 7 5
Item Code
Full Course Title (Includes Tex t b o o k )
P r i c e
B K S D 4 5 E
SD45 Locomotive Service Manual
Item Code
R e q u i red Tex t b o o k
L S . 1
Reactor theory, magnetic amplifiers, transductor reactors
L S . 2
Electrical transmission, traction alternator commutation
L S . 3
Excitation system, sensor, feedback system
L S . 4
Power control equipment, rate control panel
L S . 5
Diesel locomotive, electrical equipment, transition control
L S . 6
I DAC wheel slip control system
L S . 7
S w i t c h g e a r, contact tips, inspection and replacement
L S . 8
Electrical equipment, generators, electrical cabinets
L S . 9
Power control system, testing and setting, troubl e s h o o t i n g
L S . 1 0
Control pane, relays, sw i t c h g e a r
L S . 1 1
Wheel slip control, testing and setting
L S . 1 2
Transition control, testing and setting
L S . 1 3
Dynamic brake testing, setting
L S . 1 4
Load testing
Course Objective: The student will gain knowledge of on-the-loco-
motive maintenance and become familiar with locomotive components
and systems. Also, learn to use the service data pages for reference to
applicable maintenance instructions, replacement part numbers, compo-
nent manufacturers technical literature, applicable tool and testing
apparatus numbers and specific system values for operation or testing
Who this is for: Electrical maintenance personnel, apprentices.
EMD-SD45 Locomotive Maintenance-Electrical
Enrolled students may take individual lessons.
Please contact student services for individual lesson and textbook pricing.
Item Code
Lesson Description 110
800-228-9670
studentservices@sb-reb.com
Locomotive Electrical
B K S D 5 0 B K
SD50 Locomotive Service Manual
NOTE: Students must contact EMD for the textbook
Item Code
Full Course T i t l e
P r i c e
Item Code
R e q u i red Tex t b o o k
S D. 5 0
Engine starting, fuel oil system
S D. 5 1
Lubricating oil system, cooling system
S D. 5 2
Central air system, compressed air system
S D. 5 3
Electrical equipment
S D. 5 4
Electrical equipment
S D. 5 5
Electrical control equipment, Super series wheel creep control system
S D. 5 6
Motor E/N generator module EN, current maximizer module CM, generator
feedback module FG
S D. 5 7
Motor feedback module FM, wheel slip correction system, starting wheel slip
module SQ, sanding module 8A
S D. 5 8
Load control system section 8C introduction, load control module LC, motor
temperature simulator module MS
S D. 5 9
Sensor module SE and SCR assembly, barometric compensation module BC,
generator transition control module T R
S D. 6 0 A
Excitation limit module EL, dynamic brake system, dynamic brake reg u l a t o r
module DR
S D. 6 1 A
Dynamic brake protection module DP, dynamic brake extended range module
DE, load test and horsepower standardization, high potential test for
l o c o m o t ives in serv i c e
Item Code
Lesson Description
Course Objective: Gain a general familiarity with EMD locomotive
systems and equipment and study the electrical and mechanical mainte-
nance that can be performed on the locomotive. Use the service data
pages provided as references along with the metric conversion table as
needed.
Who this is for: Maintenance personnel, foremen or others responsible
for the maintenance of the EMD SD50 Locomotive.
EMD SD50 Locomotive Maintenance-Electrical
S D 5 0 F C
EMD SD50 Locomotive MaintenanceMechanical
$ 2 6 4 . 0 0 www.
Railway
Educational
Bureau
.com
111
Locomotive Electrical
Enrolled students may take individual lessons.
Please contact student services for individual lesson pricing.
S D 6 0 M F C
SD60M Locomotive Service Manual
$ 2 6 4 . 0 0
Item Code
Full Course Title
P r i c e
B K S D 6 0 B K
SD60M Locomotive Service Manual
NOTE: Students must contact EMD for the textbook
Item Code
R e q u i red Tex t b o o k
S D. 6 0 M
Fo r ward and general locomotive information, engine start i n g
S D. 6 1 M
Fuel oil system
S D. 6 2 M
Lubricating oil system
S D. 6 3 M
Cooling system
S D. 6 4 M
Central air system
S D. 6 5 M
Compressed air system
S D. 6 6 M
Electrical equipment
S D. 6 7 M
Electrical equipment
S D. 6 8 M
Electrical equipment
S D. 6 9 M
Electrical control system
S D. 7 0 M
Electrical control system
S D. 7 1 M
Load test and horsepower calculating, high potential test for locomotive
s e rvice, metric conversion, logic system troubl e s h o o t i n g
Course Objective: Gain an overview of EMD locomotive systems and
equipment as well as specific electrical and mechanical procedures
which can be performed on board the locomotive. Also, get an intro-
duction to the computer control system and representative circuitry. Use
service data references and metric conversion tables as needed.
Who this is for: Qualified service personnel.
SD60M Locomotive Service
Item Code
Lesson Description 112
800-228-9670
studentservices@sb-reb.com
Locomotive Electrical
D S . 1
I n t r o d u c t i o n
D S . 2
Diagnostic display panel (Level 1)
D S . 3
Diagnostic display panel (Level 2)
D S . 4
Engine support systems
D S . 5
L o c o m o t ive electrical systems operation and locomotive engine
overspeed system
D S . 6
Nose, operator, dynamic braking, engine and radiator cab equipment
D S . 7
L o c o m o t ive alternator bl owe r, removal and installation, locomotive
equipment bl ower 1, air compressor removal and installation
D S . 8
Victaulic couplings, radiator removal and installation of locomotive
radiator fa n
D S . 9
26L air brake system, air supply system and air compressors
Course Objective: The student will study the principles of mainte-
nance on General Electric 1987 Series-8 Locomotives and learn about
any special tools required to properly maintain GE locomotives. Be
aware of warnings, cautions, or hazards and additional clarifications
when performing maintenance.
Who this is for: Maintenance personnel, foremen, inspectors or anyone
responsible for the maintenance of GE DASH 8 Locomotives.
GE Dash 8 Locomotives-Mechanical and Electrical
Item Code
Lesson Description
C o u rse continued on facing page www.
Railway
Educational
Bureau
.com
113
Locomotive Electrical
D S 1 F C
GE Dash 8 LocomotivesMechanical and Electrical
$ 3 5 2 . 0 0
Item Code
Full Course Title
P r i c e
BKDS BK
GE Dash 8 Locomotive Service Manual
NOTE: Students must contact GE for the textbook
Item Code
R e q u i red Tex t b o o k
D S . 1 0
Tru c k s
D S . 1 1
Traction motors, running maintenance, traction motor installation
and remova l
D S . 1 2
5GMG186 and 5GMG187 alternators, load and insulation testing
D S . 1 3
Control and power dev i c e s
D S . 1 4
Description of electrical equipment, power cable termination and connection
D S . 1 5
Diesel engine checks and adjustments
D S . 1 6
Diesel engine replacements
Item Code
Lesson Description
Enrolled students may take individual lessons.
Please contact student services for individual lesson and textbook pricing.
GE Dash 8 Locomotives Mechanical and Electrical continued 114
800-228-9670
studentservices@sb-reb.com
Locomotive Electrical
G . 1
General information, engine start i n g
G . 2
Fuel oil system, lubrication oil system
G . 3
Cooling system
G . 4
Central air system
G . 5
Compressed air system
G . 6
Compressed air system
G . 7
Electrical equipment: AR15 generator, voltage suppression, D14 altern a t o r,
traction motors, fans, pumps
G . 8
Electrical equipment: locomotive control stand, assembly, dynamic brake
throttle and reverser handles, air gauges, panel lights
G . 9
Electrical equipment: engine panel lights, gauges and what they mean,
switches, circuit breaker panel
Objective: Provide, from a servicing standpoint, a general familiarity
with EMD locomotive systems and equipment, instructions for electri-
cal and mechanical maintenance that can be performed on the locomo-
tive. Use service data pages as reference and metric conversion table.
Who this is for: Mechanical maintenance personnel, foremen or others
responsible for servicing and maintaining the GP50 Locomotive.
GP50 LocomotiveMechanical
and Electrical Maintenance
Item Code
Lesson Description
C o u rse continued on