s start as soon as power is
applied.
5. Circuit should be open
6. After about 35 seconds continuity
should be made. Do not disconnect
power or stop timing
7. After white/brown circuit is made
attach test lead to white/black
wire.
8. Circuit should be open.
9. After about 90 seconds continuity
should be made.
10. Move test lead to white/brown
wire and remove power for five
seconds and reapply. Circuit
should reset.
A time delay is faulty if:

Wht/brn circuit does not close

Wht/brn is closed all the time

Wht/blk circuit closes too early

Wht/blk circuit does not close