SECTIONAL BODY
s/catalog/ValvesSV.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive.
Yahoo! is not affiliated with the authors of this page or responsible for its content.
SECTIONAL BODY
ATV 18-07-1-01
V18
V
AL
VES
ATV 18-07-1-01
SECTIONAL BODY
STANDARD FEATURES
1-10 Sections Per Valve Bank
Differential Poppet Style Relief, Adjustable
Load Checks On Each Section
from 1500 to 3000 psi (Also available in Low Pressure
Hard Chrome Plated Spools
Version Adjustable from 500 to 1500 psi)
Compact Construction
Power Beyond Capability
Enhanced Metering Section Available in
Reversible Handle
both the High and Low Sections
Mid-Inlet and Lock Valve Section available
Flow Control Inlet
Directional Control Valves
SPECIFICATIONS
Parallel or Series Circuit Construction
Foot Mounting
Pressure Rating
Maximum Operating Temp.
..........................180癋
Maximum Operating Pressure ........ 3000 psi
Weight Per Section
Maximum Tank Pressure................... 500 psi
Inlet Section .................................... Approx 3.75 Ibs
Nominal Flow Rating
...........................1 GPM
Outlet Section ................................ Approx 3.75 Ibs.
Refer to Pressure Drop Curves.
Work Section (Standard) ............... Approx 5.50 Ibs.
Filtration:
For general purpose valves, fluid
Work Section (High) ...................... Approx 8.00 Ibs.
cleanliness should meet the ISO 4406 19/17/14
level. For extended life or for pilot operated valves,
the 18/16/13 fluid cleanliness level is recommended.
Model SV
PRINCE MANUFACTURING CORPORATION P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com E-MAIL: prince@princehyd.com PHONE (605) 235-1220 FAX (605) 235-1082
O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (605) 217-6300
V19
V
AL
VES
CATV 19-07-1-01
CATV 19-07-1-01
INLET SECTIONS
S V X X - X X X X
PORT SIZE
1. #8 SAE ORB (3/4-16 THD)
. #10 SAE ORB (7/8-14 THD)
VALVE ASSEMBLIES
The Model SV sectional body directional control valve can be ordered as separate sections or as a complete factory tested assembly. This will need
to be specified with each order. An assembly number will be assigned at the time of the order. This assembly number can then be used for future
orders.
ASSEMBLY MODEL NUMBER SVA-XXXX
XXXX = Sequence of Numbers. This number will be assigned to final valve to be assembled and tested at the factory. Each new order or quote will
be assigned a new assembly model number. Please use quotation sheet at the end of SV section.
RELIEF SETTING (in PSI)
RELIEF OPTION
1. No Relief Plug
4. Adj. Low Pressure 500-1500 PSI
5. Adj. High Pressure 1500-3000 PSI
6. Plastic Plug in relief cavity.
Use only when cartridge is to be in-
stalled at a later date.
All inlet sections have
top and side inlets.
OUTLET SECTION
S V E X X
PORT SIZE
1. #8 SAE ORB (3/4-16 THD)
. #10 SAE ORB (7/8-14 THD)
All outlet sections have
top and side outlets.
0
Often used with no relief. Review application
EXHAUST OPTION
1. Std. Open Center Outlet
w/Conversion Plug
. Power Beyond Outlet
w/#8 SAE Beyond Port
3. Closed Center Outlet
0
6 Open Center Outlet Pressure
Build-up
7. Power Beyond Pressure Build-up
#8 SAE Beyond Port
INLET SECTIONS
ALL HAVE BOTH TOP AND SIDE INLET PORTS
PART NO. RELIEF TYPE AND SETTING
PORT SIZE
SVI1
No Relief
#10 SAE ORB (7/8-1 THD)
SVI
Adjustable Low Pressure Relief Set at 1000 PSI
#10 SAE ORB (7/8-1 THD)
SVI1
Adjustable High Pressure Relief Set At 000 PSI
#8 SAE ORB (/-16 THD)
SVI
Adjustable High Pressure Relief Set at 000 PSI
#10 SAE ORB (7/8-1 THD)
WORk SECTIONS
ALL HAVE #8 SAE ORB (3/4-16 THD) PORTS, LOAD CHECk AND STANDARD LEVER HANDLE
PART NO.
SPOOL TYPE AND ACTION
SVW1AA1
-Way Single Acting w/ Spring Center
SVW1BA1
-Way Double Acting w/ Spring Center (Work Ports Blocked in Neutral)
SVW1BB1
-Way Double Acting w/ Position Detent (Work Ports Blocked in Neutral)
SVW1CA1
-Way Motor Spool w/ Spring Center (Work Ports Open to Tank in Neutral
SVW1CB1
-Way Motor Spool w/ Position Detent (Work Ports Open to Tank in Neutral)
SVW1DD1
-Way Position Float w/ Spring Center and Float Detent
SVL1CA1
-Way Spool w/ Spring Center (with Pilot Operated Checks on Both Work Ports)
SVM1ES1
-Way Meter Spool w/ Spring Center (Work Ports Blocked in Neutral)
PORT RELIEF WORk SECTIONS
ALL HAVE #8 SAE ORB (3/4-16 THD) PORTS, LOAD CHECk AND STANDARD LEVER
HANDLE. MODELS WITH RELIEF FACTORY SET AT 2000 PSI AT 3 GPM.
PART NO. SPOOL TYPE AND ACTION
PORT RELIEFS
SVH1BA1AA
-Way Double Acting w/ Spring Center
Port Relief Plugged
SVH1BA1GG
-Way Double Acting w/ Spring Center
Adjustable 100-000 PSI
SVH1DD1AA
-Way Position Float w/ Spring Center and Float Detent
Port Relief Plugged
SVH1DD1BB
-Way Position Float w/ Spring Center and Float Detent
Shim Adjustable 100-000 PSI
SVR1ES1AA
-Way Meter Spool w/ Spring Center
Port Relief Plugged
SVR1ES1GG
-Way Meter Spool w/ Spring Center
Adjustable 100-000 PSI
SVS1GA1GG
-Way Double Acting Series w/ Spring Center
Adjustable 100-000 PSI
SVS1GA1AA
-Way Double Acting Series w/ Spring Center
Port Relief Plugged
OUTLET SECTIONS
ALL HAVE BOTH TOP AND SIDE OUTLET PORTS
PART NO.
EXHAUST OPTIONS
PORT SIZE
SVE11
Open Center Outlet w/ Conversion Plug
#8 SAE ORB (/-16 THD)
SVE1
Open Center Outlet w/ Conversion Plug
#10 SAE ORB (7/8-1 THD)
SVE
Power Beyond Outlet w/ #8 SAE Beyond Port
#10 SAE ORB (7/8-1 THD)
SVE
Closed Center Outlet
#10 SAE ORB (7/8-1 THD)
SVE6
Open Center Outlet Pressure Build-up Valve
#10 SAE ORB (7/8-1 THD)
SVE7
Power Beyond Pressure Build-up Valve
#10 SAE ORB (7/8-1 THD)
TIE ROD kITS
TIE ROD TORQUE
10in-lbs 6in-lbs
(1 1/ ft-lbs 1/)
ORDERING INFORMATION:
The following is a listing of valve sections available from stock on a standard basis.
STANDARD SECTIONS AVAILABLE:
SPECIAL INLET AND OUTLET SECTIONS AVAILABLE:
Sections other than standard models listed can be
made to order. Use order code Matrix below to generate a model number that meets your requirements. If you prefer, contact your Sales
Representative with your specific requirements and a model number will be assigned for you. This model number can be used for future
orders. A minimum order quantity will apply to special valves. Please consult Sales Representative.
PART NO.
66001001 1 Section*
6600100 Sections*
6600100 Sections*
6600100 Sections*
6600100 Sections*
*Number of Work Sections
PART NO.
66001006 6 Sections*
66001007 7 Sections*
66001008 8 Sections*
66001009 9 Sections*
66001010 10 Sections*
SEE PAGE 14 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
PRINCE MANUFACTURING CORPORATION P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com E-MAIL: prince@princehyd.com PHONE (605) 235-1220 FAX (605) 235-1082
O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (605) 217-6300
V0
V
AL
VES
CATV 0-07-1-01
CATV 0-07-1-01
HANDLE OPTION
1. Standard Lever Handle
. Less Handle Only
3. Less Complete Handle Assembly
4. Adjustable Handle
5. Tang Spool End Only
6. Clevis Spool End Only
7. Vertical Handle
8. Straight Handle
9. Blank for Optional Joystick Handle
11. Enclosed Handle
1. Extended Enclosed Handle
SPOOL ACTION
A-Spring Center (SVW & SVL only)
B-3 Position Detent
C-Friction Detent
D-Spring Center w/Float Detent (SVW only)
E-Light Spring Center
F- Position Detent Neutral and Out (No IN Position)
G- Position (Center and Spool Out) - Spring Loaded
to Spool Out (Pressure to B Port) Position
H- Position (Center and Spool ln)-Spring Loaded
to Spool In (Pressure to A Port) Position
J-S/C with MicroSwitch Bracket -Position (MicroSwitch not provided)
K-S/C with MicroSwitch Bracket 1-Position (MicroSwitch not provided)
(activates on spool out only)
M-Spring Center Detent In
N-Spring Center Detent Out
R-Spring Center Pneumatic Actuator
S-Spring Center (SVM & SVF)
PORT RELIEF B OPTION
A-Relief Cavity Plugged
B-Non-Adjustable Direct Acting Relief 1500-3000 PSI
C-Non-Adjustable Direct Acting Relief 500-1500 PSI
D-Anti-Cavitation Check
E-Adjustable Combination Port Relief/Anti-Cavitation Check
1000-500 PSI***
F-Non-Adjustable Combination Port Relief/Anti-Cavitation
Check 1000-500 PSI***
G-Adjustable Direct Acting Relief 1500-3000 PSI
H-Adjustable Direct Acting Relief 500-1500 PSI
PORT RELIEF A OPTION
A-Relief Cavity Plugged
B-Non-Adjustable Direct Acting Relief 1500-3000 PSI
C-Non-Adjustable Direct Acting Relief 500-1500 PSI
D-Anti-Cavitation Check
**E-Adjustable Combination Port Relief/Anti-Cavitation Check
1000-500 PSI***
F-Non-Adjustable Combination Port Relief/Anti-Cavitation
Check 1000-500 PSI***
**G-Adjustable Direct Acting Relief 1500-3000 PSI
**H-Adjustable Direct Acting Relief