ue>current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Untitled Globtek Inc.
186 Veterans Drive, Northvale, NJ 07647
Tel: (201) 784 1000
Fax: (201) 784 0111
Email: sales@globtek.com
Web:
www.globtek.com
Index
IP68 Sealed Buccaneer
®
Connectors
3
IEC Connectors
EN60 320 Connectors
4
Polysnap
®
Connectors
Power Inlet Modules
5
IEC Cord Sets and Distribution Units
6
General Purpose Connectors
7
Mains Filters
8
Fuseholders
including Fuses
9
Indicators
including Vandal Resistant
10
Switches
including Vandal Resistant types
11 Globtek Inc.
186 Veterans Drive, Northvale, NJ 07647
Tel: (201) 784 1000
Fax: (201) 784 0111
Email: sales@globtek.com
Web:
www.globtek.com
A full range of IP68 rated environmentally sealed
circular connectors designed to provide secure and
safe connections in harsh or hostile conditions. The
range consists of Mini, Standard and the heavy
duty, high current 900 Series.
With a wide choice of alternatives from 2 to 25
poles, BNC connections and screw, solder or crimp
terminations, the Buccaneer series provide the
answer to many design problems.
Screw terminations ensure simple field connection,
whilst crimp terminations fulfil the requirement for fast
and effective volume connections. Each range has flex
cable connectors together with in-line flex cable and
panel mounting options. The Buccaneer
®
series find
numerous applications either in external environments
or where protection against the ingress of moisture is
needed.
Buccaneer
®
Connectors
Contact Carrier Inserts
For solder or crimp contacts
3 or 8 pin or socket
Fits all body styles
Contacts supplied separately
3-10 Amp, 150-380V a.c.
BNC inserts
50 or 75 ohms
Fits all standard connector versions
Additional Bulkhead Adaptor
For use with PX0941 to give a 45º
or 90º angle
Flex Cable Connector
Mates with all other styles
2, 3, 4, 5 & 7 pole
Plug or Socket
32A, 600 V
7-13mm cable acceptance
Flex Mounting Connector
Mates with all other styles
Poles 2, 3, 4, 6, 7, 9, 25 or BNC
Plug or Socket
1-10 Amp, 50-250V a.c./d.c.
3-9mm cable acceptance
Flex Cable Connector
Mates with Flex In-Line or Panel
Mounting versions
Suitable for Pin or Socket inserts
Cable acceptance 3.5-9mm
(Standard 5-7mm)
Flex Cable Connector
Mates with all other styles
2, 3, 4, 5 & 7 pole
Plug or Socket
32A, 600V
14-22mm cable acceptance
Strain relief clamp
In-Line Flex Mounting Connector
Mates with Flex Mounting
Connector
Poles 2, 3, 4, 6, 7, 9, 25 or BNC
Plug or Socket
1-10 Amp, 50-250V a.c./d.c.
3-9mm cable acceptance
In-Line Flex Cable Connector
Mates with PX0800
Suitable for Pin or Socket inserts
Cable acceptance 3.5-9mm
(Standard 5-7mm)
In-Line Flex Cable Connector
Mates with PX0911 & PXA911
2, 3, 4, 5 & 7 pole
Plug or Socket
32A, 600V
7-13mm cable acceptance
Chassis Mounting Connector
Mates with Flex Cable Connector
Poles 2, 3, 4, 6, 7, 9, 25 or BNC
Plug or Socket
1-10 Amp, 50-250V a.c./d.c.
Chassis Mounting
Mates with PX0800
Suitable for Pin or Socket inserts
In-Line Flex Cable Connector
Mates with PX0911 & PXA911
2, 3, 4, 5 & 7 pole
Plug or Socket
32A, 600V
14-22mm cable acceptance
Strain relief clamp
Bulkhead Surface Mounting
Connector
Mates with Flex Cable Connector
Poles 2, 3, 4, 6, 7, 9, 25 or BNC
Plug or Socket
1-10 Amp, 50-250V a.c./d.c.
Chassis Mounting
Mates with PX0800
Right angle cable entry
Suitable for Pin or Socket inserts
Chassis Mount Connector
Anti-rotation key
Mates with PX0911 & PXA911
Plug or Socket
32A, 600V
3-7mm panel thickness
Low Profile Flange Mounting
Connector
Mates with Flex Cable Connector
Poles 2, 3, 4, 6, 7, 9, 25 or BNC
Plug or Socket
1-10 Amp, 50-250V a.c./d.c.
Chassis Mounting Connector
Mates with PX0800
PX0804 without sealing cap
retaining clip, PX0805 with sealing
cap retaining clip
Suitable for Pin or Socket inserts
Flange Mount Connector
Anti-rotation key
Mates with PX0911 & PXA911
Plug or Socket
32A, 600V
M6 screw thread
Contacts for 25 way inserts
Crimp or Solder pins and sockets
1A, 50V
Supplied in packs of 10
Screw Terminal Inserts
2, 3, 4 and 6 Poles
Fits all body styles
Leading earth pin on 3, 4 and
6 pole inserts
3-10 Amp, 150-380V a.c.
PX0950 & PX0941 shown mated at
90º angle
Sealing caps to maintain IP68
rating of unmated connectors
PX0734 fits Flex Mounting
Connector
PX0733 fits all other styles
BNC Inserts
50 or 75 ohms
Fits all mini body styles
Sealing caps to maintain IP68
rating of unmated connectors
PX0811 fits Flex Mounting
Connector, PX0810 fits all other
body styles
Sealed In-Line Cable Joiner
6A, 250V a.c.
3-9mm cable acceptance
Available in black or orange
Sealing caps to maintain IP68
rating of unmated connectors
PX0960 used for PX0911 &
PXA911
PX0970 used for all other styles
PX0911/xx/xx
PXA911/xx/xx
PX0921/xx/xx
PXA921/xx/xx
PX0931/xx/xx
PX0941/xx/xx
PX0950
PX0950 & PX0941
PX0960, PX0970
Flex Mounting
Flex Mounting
In-Line Connector
Chassis Mounting
Bulkhead/Surface Mounting
Low Profile Flange Mounting
25 way inserts (assembled)
BNC Inserts
PX0733, PX0734
PX0777
PX0800
PX0801
PX0802
PX0803
PX0804 & PX0805
Screw Terminal Inserts
Contact Carriers
BNC Inserts
Sealing Caps Globtek Inc.
186 Veterans Drive, Northvale, NJ 07647
Tel: (201) 784 1000
Fax: (201) 784 0111
Email: sales@globtek.com
Web:
www.globtek.com
IEC Connectors
PC Snap Fit to Panel Outlet
Panel Sizes 1, 1.5, 2.0 or 3.0mm
PC Spills
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Snap Fit to Panel Outlet
Panel Sizes 1, 1.5, 2.0 or 3.0mm
2.8 or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Flange Mount Outlet
2.8mm or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Flange Panel Mount Inlet
Figure of Eight
2.8mm Solder Tabs
2.5A, 250V a.c.
Snap Fit to Panel Inlet
Figure of Eight
Fits Panel sizes 1, 1.5 or 2mm
2.8mm Solder Tabs
2.5A, 250V a.c.
Snap Fit to Panel Inlet
Fits Panel Sizes 1, 1.5, 2.0 or
3.0mm
2.8, 4.8, 6.3mm Tabs or Screw
Terminals
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Vertical Flange Mount Inlet
2.8, 4.8, 6.3mm Tabs or Screw
Terminals
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
PC Flange Rear Mount Inlet
With or Without Rear Cover
PC Spills
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Flange Mount Inlet
Two Pin Class II (No Earth Pin)
2.8, 4.8, 6.3mm Tabs or Screw
Terminals
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Flange Mount Fused Inlet
Single Fuse 5 x 20mm
Spare Fuse Facility
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
Snap Fit to Panel Fused Inlet
Single Fuse 5 x 20mm
Spare Fuse Facility
Panel Sizes 1, 1.5, 2.0 or 3.0mm
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
Flange Mount Fused Inlet
Single Fuse 5 x 20mm
Spare Fuse Facility
Two Pin Class II (No Earth Pin)
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
Flange Mount Fused Inlet
Twin Fused 5 x 20mm
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
Straight Female Connector
Cable Mounting
Rewirable
Screw Terminals
10A, 250V a.c.
Side Entry Female Connector
Cable Mounting
Rewirable
Screw Terminals
10A, 250V a.c.
Angled Female Connector
Cable Mounting
Rewirable
Screw Terminals
10A, 250V a.c.
Straight Female Connector
Cable Mounting
Hot Condition
Mates with PX0590 and PX0595
Screw Terminals
10A, 250V a.c.
Flange Mount Inlet
Hot Condition
2.8 or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Snap Fit to Panel Two Way Outlet
Panel Size 1.5mm
2.8mm Solder Tabs
10A, 250V a.c.
Snap Fit to Panel Four Way Outlet
Panel Size 1.5mm
2.8mm Solder Tabs
10A, 250V a.c.
Flange Mount Outlet
Shuttered
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Rectangular Flange Mount Outlet
Shuttered
2.8, 4.8 or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Flange Mount Outlet
Two Pin Class II (No Earth Pin)
2.8 or 6.3mm Tabs
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
Side Entry Male Connector
Cable Mounting
Rewirable
Screw Terminals
10A, 250V a.c.
Straight Male Connector
Cable Mounting
Rewirable
Screw Terminals
10A, 250V a.c.
Angled Male Connector
Cable Mounting
Four Position Cable Entry
Rewirable
Screw Terminals
10A, 250V a.c.
PX0784/28
PX0785/28
PX0575/10/28
PX0579/28
PX0580/63
PX0580/PC
PX0690/28
PF0001/28
PF0011/10/28
PF0006/28
PF0030/28
PX0587
PX0587/SE
PX0588
PX0597
PX0590/28
PX0714/2/15/28
PX07144/15/28
PX0675/28
PX0695/10/28
PX0695/10/PC
PX0793/28
PX0793/1/Termination
PX0705/28
PX0685
PX0686
PX0686/SE
Flange Mount Inlet
2.8, 4.8, 6.3mm Tabs or Screw
Terminals
10A, 250V a.c.
(15A, 250V a.c. UL & CSA)
A comprehensive range of internationally
approved, mains rated inlets, outlets and
connectors conforming to IEC and EN60320
specifications. The combinations of mounting styles
and terminations include: flange fixing, snap to
panel and PCB mounting versions together with