olspan=2>
« back to results for ""
Below is a cache of http://www.picltd.com/PDF/05Products.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
PIPELINE INSPECTION COMPANY, LTD. PIPELINE INSPECTION COMPANY, LTD.
COMPLIANT Pipeline Inspection Company, Ltd. offers three new "SPY
®
" Model Holiday Detectors that
combine the field proven cases, probes and electrode configuration with latest technology in
leading-edge circuitry that is simplified and more efficient.
Infinite Voltage Settings
allows you to set the voltage exactly to the level you desire
for the coating you are inspecting without removing the battery. Not 6 settings, not 20
... any setting you desire over the complete range of each detector model. Whatever the
pipe size, 2 inches through 60 inches, whatever the coating - somastic, tar, asphalt, extrud-
ed coats and tapes or thin film epoxy coatings - you have at your control the exact volt-
age setting required.
Automatically Regulated Voltage
keeps your voltage constant! Over a range of 2in.
through 60in. pipe the detector output voltage automatically adjusts under the working
load to the voltage levels you set. Now you can forget compensations for pipesize,
coating variations, or moisture on the pipe - the detectors automatically make
these adjustments.
Interchangeable batteries
easily slip into position with a snap that announces
positive contact, and a secure lock in position. Two batteries and a universal
charger are part of the package. For continuous service, one battery is kept
charging while the other powers the unit. Infinitely Adjustable Voltage Output Voltage Automatically Regulated Rugged Ergonomic Design Easy Installation Battery Horn and Light for Holiday Indication
Portable Holiday Detectors
Pipeline
Industrial
Accurate, Reliable Inspection
of Any Coating, Onshore
or Offshore
COMPLIANT
Models
780 785 790
Model 780
1,000 to 5,000 volts (thin film)
Model 785
1,000 to 15,000 volts
Model 790
5,000 to 35,000 volts Faster and Easier
, Wet Sponge detectors are compact and light
weight with no bulky battery packs allowing for non-destructive
inspection of paints, epoxy paints and coatings.
The Model 670
is light weight and easy to handle. The elec-
trode wand assembly is easily inserted into the unit and
secured. Inspect more area faster. A revolutionary roller sponge
electrode is an optional accessory for the Model 670. With
this roller sponge electrode, coating inspections move along
faster and with less operator fatigue.
The Model 673
Wet Sponge Holiday Detector for Plant or
Stationary Operations is highly sensitive and accurate. An
uniform coating of only one mil of paint or other non-conductive
material over a metal surface is sufficient to repel a small current
flow. If a pin-hole holiday is encountered, moisture from the
sponge will seep into the hole and create a free path for elec-
trical flow, activating the signal horn.
Models
670 673
Wet Sponge Holiday Detectors
Portable Wet Sponge Holiday Detector are
compact and lightweight. Operate on a sin-
gle 9-volt alkaline battery.
Non-Destructive Inspection
of Paints and Coatings. Sensitive and Accurate Inspect More Area Saves Time and Effort Rugged, Durable Construction Uses One Standard 9-Volt Battery
Model 673 - For Plant or
Stationary Operations Regulated Output Voltage Internal Light & Signal Horn 80K - 100K Test Buttons (2) 120 Volt A.C. Power Sources
for remote Signal or Control
Model 670
Model 673 For Heavy-Duty or Continuous Operation in Coating Plants and Yards
Models
115

121

125

135
In-Plant Holiday Detectors
COMPLIANT
Automatic
Manual
On Pipe Coating Machines
TYPICAL OPERATIONS
Overhead Trolley Wire Assembly
On Pipe In-Plant or In-Yard,
with Spring Electrode
On Metal or Plastic Films,
With Flat Brush Electrode
A
Building Wall or Pole
B
Insulators
C
Copper Trolley Wire
D
Klaxon Signal Horn
E
Spring Electrode Wand
F
Coated Pipe
G
Pipe Rack
H
Polarized Power Plug & Receptacle
I
HIGH VOLTAGE output cable to
insulated trolley wire
A
B
C
E
F
I
B
D
H
G
G Leading-Edge Electronic Circuitry Practically eliminates maintenance and downtime Operates on Standard 120 VAC No batteries required Output Voltage Automatically Regulated for 2 inch - 60 inch pipe sizes Continuous Digital Display of Output Voltage Easy-to-Read, large numbers in kilovolts for instant status checks Light and Horn Detection Signals Large, highly visible red light and an external loud horn to indicate holidays Permanent or Semi-Permanent Installation Extremely versatile for automatic or manual operation Outlet Plug for Remote 120 VAC Signal, Marking or Alarm Devices Internal Heater Prevents moisture build-up when the unit is not in use Positive Locking interconnector for High Voltage Electrode Cable technology in leading-edge circuitry that is simplified and more efficient.
Model 115
1,000 to 5,000 volts (thin film)
Model 121
1,000 to 15,000 volts
Model 125
5,000 to 25,000 volts
Model 135
10,000 to 35,000 volts The Model JM Jeepmeter provides the ultimate in accuracy and
versatility. It features a digital display of measured voltages.
The precision measurement displayed eliminates interpretation
errors and is perfect for every day tests.
This Jeepmeter measures both pulse and DC voltage output.
For pulse type holiday detectors, used to inspect shrink
sleeves, tapes, coal tars, etc., the JM will measure up to
40 kv. For DC holiday detectors, used to inspect thin film
epoxy coatings, the DC range of the JM measures up to 5kv.
When used with pulse type detectors, this Jeepmeter automati-
cally senses the polarity of the pulse. Solid state electronics
solve the stability and repeatability problems sometimes
experienced in the older models.
One Meter Does It All
The Pocket Jeepmeter is for high voltage
pulse output detectors. It has a range of
0-20 kv. Two standard 9-volt alkaline
batteries power the PJM.
The DC Pocket Jeepmeter measures the
output voltage of DC holiday detectors. It
has a range of 0-5 kv. This DCPJM requires
no batteries.
The output voltage of your holiday detector is subject to
influence by weather conditions, moisture on the pipe, improper
grounding and soil conditions. In order to assure absolute
highest accuracy and performance from your holiday detectors
(jeeps), Pipeline Inspection Company has developed three
special Jeepmeters for checking detector voltage output.
These Jeepmeters are designed to accurately measure the
output voltage of any detector.
Two Convenient, Economical Field Models
Three Voltage Meters to Test Holiday Detector Outputs
Models
JM PJM DCPJM
Jeep Meters
Model PJM
Pocket Jeepmeter
Model DCPJM
DC Pocket Jeepmeter
COMPLIANT Electronic Pig Tracking and Locating Systems
The Pig Tracker is an electronic pig locating system that will
locate your pigs wherever they go ~ through gathering lines,
mainline transmission lines, municipal gas, water and waste
water lines, refinery and other industrial piping.
Using strong low frequency signals, the Pig Tracker system
gives you a more reliable signal life. Depending on the model,
the Pig Trackers signal can be received for up to 500 hours.
It operates on standard batteries ~ readily available from retail
stores. No recharger is necessary.
The Pig Tracker system consists of a cylindrical transmitter
which travels with the pig, and a hand-held pick-up wand and
receiver that receive the signals and inform the operator of the
pigs location.
Model 1 System
is designed for 2 inch to 6 inch poly (foam) pigs.
Model 2 System
is designed for pipe sizes 2 to 6 inches. This
system includes the PT 107 Transmitter, specially designed
to fit poly (foam) and urethane pigs. The PT 107 transmitter
negotiates line sizes of 3 to 6 inches with 3R or greater
bends and 2 inch lines with 5R or greater bends. Not suited
for metal pigs.
Model 4 System
is designed for 6 inch to 12 inch pipes with 1R
or greater bends, using the PT275 Transmitter.
Model 12 System
is designed for 12 inch and larger pipe with
1R or greater bends. It incorporates the PT750 Transmitter. Keeps Pigs Located - Onshore or Offshore Rugged Ergonomic Design Uses Standard, Non-Rechargeable Batteries Will Negotiate Long Radius Bends Transmitter is Water-Tight and Can Withstand
High Pressure and Temperatures Signal Strength and Range Exceed Others Coded Signal Minimizes Operator Interpretation Error Smallest Transmitter
Models PT101 PT107 PT275 PT750
Models 1, 2, 4 & 12 PTR Systems
Electronic Pig Tracking Systems
Model PTR
Model PT750 with
regular mount
Model PT275 with
universal mount For Use With SPY
®
Pig Trackers Senses and Signals Passages of a Pig Tracker Equipped Pig Non-Intrusive, Mounts onto Pipe O.D. Portable or Permanent Mount Output to Recording, Indicating or Actuating
Eq