a
b
l
e P
r
o
c
e
s
s
o
r P
M
C C
a
r
r
i
e
r
The Motorola PrPMC Carrier
board provides a exible off-the-
shelf method for deploying and
developing PMC processor
products. Five complete PMC
sites are included: one master
(Monarch) and four standard
(non-Monarch). With 64-bit
PCI support, this carrier board
provides a high-performance
platform for demanding applica-
tions such as storage. Multiple
PMC sites provide con gurable
I/O, supporting a variety of
industrial automation interfaces.
The PrPMC Carrier is perfect for
printing or storage applications
where rapid time-to-market is
critical. Medical and telecom
applications will bene t from
rapid upgrades to the processor
and I/O.
The front panel supports the
three PMCs and connectors
for the Monarch sites serial
debug and optional Ethernet
ports, as well as the two
Ethernet ports on the carrier
board. Connectors for an
ATX-compatible power supply
and optional IPMC761 I/O
module are also provided.
KEY FEATURES
Five PMC sites one 33 MHz
capable Monarch processor
PMC; four standard 33 MHz
PMCs
32/64-bit support
Dual 10/100 Ethernet
Monarch support including
PCI clock, arbitration, etc.
Approximately 10" by 12" ATX-like
form factor
PrPMC System, 1U enclosure
(optional)
Embedded Linux (optional) P R O C E S S O R P M C M O N A R C H I N T E R FA C E
PMC site: Single-wide
Address/Data: 64-bit addressing; 32/64-bit data
PCI Bus Clock: 33 MHz
Signaling: 3.3V or 5.0V selectable
Power: +3.3V, +5V
Size: 74 mm x 149 mm (single-wide)
I/O from Processor PMC: Front panel


P14: Serial debug, Ethernet, Flash, JTAG/COP
Related Standard: Compatible with VITA32 processor


PMC standard (for more information, refer to
www.vita.com)
I E E E P 1 3 8 6 . 1 I N T E R FA C E
Address/Data: 64-bit addressing; 32/64-bit data
PCI Bus Clock: All sites are 33 MHz
Signaling: 3.3V or 5.0V selectable
Power: +3.3V, +5V
Size: 74 mm x 149 mm (single-wide)


149 mm x 149 mm (double-wide, one site)
D U A L E T H E R N E T

Controller: Dual Intel
®
82559ER
Interface Speed: 10/100Mb/s
PCI Local bus DMA: Yes
Connector: Routed to front panel via an RJ-45
OPTIONAL IPMC SUPPORT

IPMC761-001: Rear I/O PMC module, Ultra-wide SCSI

S P E C I F I C AT I O N S
2
PRPMCCARRIER
PMC I/O
PMC I/O
Ethernet
Ethernet
Ethernet
Ethernet
PrPMC-A
Flash, Serial,
& Ethenet
PMC
#1
PMC
#2
IPMC
#3
PMC
#4
32/64-bit, 33 MHz PCI
32/64-bit, 33 MHz PCI
BUS #2
BUS #1
PMC I/O
PrPMC I/O
PrPMC I/O
PrPMC I/O
Tranparent
Bridge
The PrPMC Carrier supports one master (Monarch) and four target (non-Monarch) PMC sites. All sites support 32/64-bit
PCI cards. Processor PMC I/O is supported on the Monarch site including a Flash interface and sockets, serial debug and
an optional Ethernet port. The SCSI I/O connector is compatible with the optional IPMC761 module.
D E TA I L S I / O C O N N E C T O R S U M M A RY
PMC site 1: Monarch with Pn1, Pn2, Pn3, Pn4;


Flash sockets for optional debugger
PMC site 2: Pn1, Pn2, Pn3, Pn4 (to 64-pin header for I/O);


also front panel I/O
PMC site 3: Pn1, Pn2, Pn3, also front panel I/O
PMC site 4: Pn1, Pn2, Pn3, Pn4 & J45 (for IPMC761 I/O);


also front panel I/O
PMC site 5: Pn1, Pn2, Pn3
Power: 20-pin ATX connector, 2-pin on-off switch
Front, COM1 & LAN1: Two RJ-45 Monarch site 1, Pn4 I/O
Front, LAN2 & LAN3: Two RJ-45 Ethernet interfaces
to
on-board
82559ER
Rear, SCSI: 68-pin miniature sub-D to optional


IPMC761 in site 4
Rear, RISC watch: 16-pin header to optional IPMC761
in
site
4
Rear, Misc., CN15: Header for power LED, reset,
CPU
abort
P O W E R R E Q U I R E M E N T S
( C A R R I E R B O A R D O N LY )
+5V 5%: TBD
+12V 10%: TBD
12V 10%: TBD
Note: +12V/12V is only supplied to the PMC slot
BOARD SIZE (ATX SPECIFICATION)

Width: 304.8 mm (12.0 in.)
Length: 243.84 mm (9.6 in.)
Height: 20.3 mm (0.8 in.), with standard height PMCs
installed
E N V I R O N M E N TA L

Operating
Storage/Transit
Temperature:
0°C to +55°C
40°C to +70°C

forced air cooling
Humidity (NC):
5% to 85%
5% to 85%
Vibration:
1 G RMS,
6 G RMS,

202000 Hz
202000 Hz
random
random
E L E C T R O M A G N E T I C C O M PAT I B I L I T Y ( E M C )
Intended for use in systems meeting the following
regulations:
U.S.: FCC Part 15, Subpart B, Class A (non-residential)
Canada: ICES-003, Class A (non-residential)
This product was tested in a representative system to the
following standards, results pending:
CE Mark per European EMC Directive 89/336/EEC with
Amendments; Emissions: EN55022 Class A; Immunity:
EN55024
S A F E T Y
All printed wiring boards (PWBs) are manufactured
with a ammability rating of 94V-0 by UL recognized
manufacturers.
S P E C I F I C AT I O N S
PRPMCCARRIER 3 www.motorola.com/computing
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Of ce. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S.
and other countries. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006.
PRPMCCARRIER-D3 06/06
S O L U T I O N S E RV I C E S
Motorola provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle.
Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal
services enable product longevity and technology refresh.

And solution extras include enhanced warranty and repairs.
Sales Of ces
Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720
Tel Aviv, Israel +972 3 568 4385


Paris, France +33 1 69 35 25 88


Shanghai, China +86 215292 5693


Munich, Germany +49 89 608 14-0


Tokyo, Japan +81 3 5424 3101
Loughborough, UK +44 1509 634300


Hong Kong, China +852 2966 3209
This document identi es products, their speci cations, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to
sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on
which Motorola may sell products. A prospective buyer should exercise its own independent judgment to con rm the suitability of the products for particular applications.
Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design.
Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or
other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorolas licensee, licensees transferees, and licensees
customers and users. Availability of some of the products and services described herein may be restricted in some locations.
O R D E R I N G I N F O R M AT I O N
Part Number
Description
PRPMC-CARR-0001
Fully con gured product with a Monarch PrPMC800-1249 PMC module and
four non-Monarch PMC sites, 64MB ECC memory, 1MB Flash and Ethernet
PRPMC-CARR-0002
Fully con gured product with a Monarch PrPMC800-1259 PMC module and four
non-Monarch PMC sites, 128MB ECC memory, 1MB Flash and Ethernet
PRPMC-CARR-0003
Fully con gured product with a Monarch PrPMC800-1269 PMC module and four
non-Monarch PMC sites, 256MB ECC memory, 1MB Flash and Ethernet
Related Products
IPMC761-001
Ultra-wide SCSI with compatible connector on PrPMC Carrier
MPMC301-001
Entry-level VGA graphicsrecommended for Linux
PRPMC-SYS-0002
1U ATX-like processor PMC System with four PMC I/O sites
Documentation
PRPMCCRA/IH
PrPMC Carrier Installation Guide
Documentation is available for on-line viewing and ordering at http://www.motorola.com/computer/literature.
RoHS Status
This product is being redesigned for RoHS
compliance. The part number for the 5/6 RoHS
compliant product is PrPMC-CARR5E.