g=0 width=100%>
Yahoo! is not affiliated with the authors of this page or responsible for its content.
Retail Price list December, 2007
Retail Price list December, 2007
NOTE: ALL E-PANELS HAVE SWITCHED TO LEFT HAND HINGE AS THE STANDARD
E-Panel, OutBack version
ETL listed for the US and Canada

Model No.
Price Description


shipping Size and Weight
MNE125ST-L
$439
Gray steel with 125a/125 VDC inverter breaker 14 X 12 X 28 28 Lb.

MNE175ST-L
$479
Gray steel with 175a/125 VDC inverter breaker 14 X 12 X 28 29 Lb.
MNE250ST-L
$479
Gray steel with 250a/125 VDC inverter breaker 14 X 12 X 28 29 Lb.
MNE125AL-L $479
White Alum with 125a/125VDC inverter breaker 14 X 12 X 28 19 Lb.
MNE175AL-L $519
White Alum with 175a/125VDC inverter breaker 14 X 12 X 28 20 Lb.
MNE250AL-L $519
White Alum with 250a/125VDC inverter breaker 14 X 12 X 28 20 Lb.
*MNE175STS-L $549
Stretched Gray steel with 175a/125VDC breaker 18 X 11 X 28 39 Lb.
*MNE250STS-L $549 Stretched Gray steel with 250a/125VDC breaker 18 X 11 X 28 39 Lb.
* Preferred E-Panels
MNERIGHTdoorST $59 Gray Steel RH door with LH Chrg Cntrl Brkt for narrow OB chassis


MNERIGHTdoorAL $65 Wht Alum RH door with LH Chrg Cntrl Brkt for narrow OB chassis

Note:

For E-Panels built as Right hand units, add a -R to the end of the model number instead of the L.
Right Hand versions have the hinge on the right, circuit breakers on the right and charge control bracket on
the left
Note:
The Stretched version (
STS
) utilizes the Magnum sized chassis to provide 5 additional wiring room
and includes more wiring friendly AC&DC bus bars. Each bus bar has 14 set screw connection points, (no
ring terminals required)
Note:
To accommodate two panel mount breakers (such as our 80 amp) on the opposite side from the din
rail breakers, add APOLLO as a suffix to the part number. Example: MNE250STS-L-APOLLO

Top picture:
narrow OutBack gray steel shown as it comes with all the parts
Middle picture:
Stretched OutBack shown with the OutBack surge arrestor for grid tie applications
Bottom picture:
Stretched OutBack gray steel shown as it comes with all the parts
For further info, See E-Panels Explained at
www.midnitesolar.com

--------------------------------------------------------------------------------------------------------
E-Panel Lite, for use with SW, DR, RS etc. (Same size as OutBack narrow)

MNE125LT $419
Gray steel with 125a/125VDC inverter breaker 14 X 12 X 28 22 Lb.
MNE175LT $459 Gray steel with 175a/125VDC inverter breaker 14 X 12 X 28 22 Lb.
MNE250LT $459 Gray steel with 250a/125VDC inverter breaker 14 X 12 X 28 22 Lb.


MNE125ALT $459
White Alum with 125a/125VDC inverter breaker 14 X 12 X 28 15 Lb.
MNE175ALT $499 White Alum with 175a/125VDC inverter breaker 14 X 12 X 28 15 Lb.
MNE250ALT $499 White Alum with 250a/125VDC inverter breaker 14 X 12 X 28 15 Lb.

Note:
all Lites come with a LH door, inverter breaker, pre-wired AC input and bypass, 500 amp/50mV shunt, AC
terminal blocks, din rails, wall mounting brackets, instructions and lots of hardware.
ETL listed for the US and Canada

-------------------------------------------------------------------------------------------------------------
------------
E-Panel, Magnum version
ETL listed for the US and Canada

Model Number Price
Description



shipping Size and Weight
MNE175STM-L $549 Gray steel with 175a/125VDC inverter breaker 18 X 11 X 28 39 Lb.
MNE250STM-L $549 Gray steel with 250a breaker for MS4024/ MS2812 18 X 11 X 28 39 Lb.
MNErightdoorSTM $59 Gray Steel right hand hinge door with LH Chg Cntrl Brkt for wide chassis
As shown, the Magnum E-Panel comes with inverter breaker, 2/0 inverter cables, pre-wired AC input and
bypass, 500 amp 50mV shunt, AC terminal blocks, DC positive and DC negative bus bars, PV input bus bar, din rails,
Ground bus bar, DC wiring cover, top shield, remote display mounting bracket, wall mounting brackets,
charge controller bracket and lots of hardware and grommets.

E-Panel, Magnum AE version 120/240VAC
ETL listed for the US and Canada


MNE175STM-L-240 $799 White steel for 120/240VAC in & out for MS4448-AE 18 x 11 x 28 42 Lb.
MNE250STM-L-240 $799 White steel for 120/240VAC in & out for MS4024-AE 18 x 11 x 28 42 Lb
The 120/240 E-Panels come with features above plus terminal bus bars for 120/240VAC input and output
Mini DC Disconnect Power Center with inverter breaker and din rail

MNDC125
$205
White alum with 125a/125VDC breaker 10 X 5 X 18 7 Lb.
MNDC175
$235
White alum chassis with 175a/125VDC breaker 10 X 5 X 18 7 Lb.
MNDC250
$235
White alum chassis with 250a/125VDC breaker 10 X 5 X 18 7 Lb.
Note:
Add Left to model for left hand breaker placement (DR inverters)
ETL listed for US and Canada



MNPV Combiners
ETL listed for the US and Canada up to 3/12 pitch

MNPV6 $109 Gray alum rainproof enclosure with insulating dead front, will accept six 150VDC breakers or 4
600VDC touch safe fuse holders. Includes 14 position PV negative bus bar, 14 position ground bus bar, 120 amp
Plus bus bar for breakers and 60 amp bus bar for fuses Boxed size: 9 x 14 x 4 weight: 4 Lbs.

MNPV3 $89 Gray alum rainproof enclosure without deadfront, will accept three 150VDC (MNEPV) breakers.
Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. 11 x 5 x 4 2lbs.


Baby Box enclosure for 1-4 MNEPV or MNEAC din rail breakers
General use enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution or?
Used all around the world. ¾ & 1 knockouts each end. Price $36.00 boxed: 3 x 3 x 7 2 Lbs.



Dual 50 amp 240VAC Transfer Switch in a small box
Non-listed due to small size. 8AWG max Price $109.00 3x3x7 box with 1 KO in each end 2 Lbs.


Options for E-Panels, MNDC, PV Combiners and Baby Box

MNEPV series din rail mount breakers
$13.00
150VDC din rail mount breaker

(13mm wide) <1 Lb.
Part number example: MNEPV15
Always in stock: 1,2,3,4,5,6,7,8,9,10,12,15,20,30,40,50,63 amps

MNEPV breakers are the same as CBI QY breakers available elsewhere except ours are 150VDC!

150VDC ETL listed in the US and Canada
MNDC-GFP $69 63 amp 150VDC DC ground fault protector (UL listed breaker assy) 3 Lb.

150VDC ETL listed in the US and Canada

MNEAC10, 15, 20 $15 15-60 amp 120VAC UL489A din rail mount (13mm wide) <1 Lb.

MNEAC30, 40, 50, 60 $15 15-60 amp 120VAC UL1077 din rail mount (13mm wide) <1 Lb.

Note: UL489A is the branch circuit rating, UL1077 is for supplementary protection

Not so standard breakers for field use, but are installed at the factory in MidNite products
(Protrusion through the panel is shorter than the black breakers)
MNEAC15QZD white 15 amp 277VAC UL1077 single pole $15.00
MNEAC30QZD white 30 amp 277VAC UL1077 single pole $15.00
MNEAC50QZD white 50 amp 277VAC UL1077 single pole $15.00
MNEAC30QZD2P white 30 amp 277VAC UL1077 double pole $30.00
MNEAC50QZD2P white 50 amp 277VAC UL1077 double pole $30.00
MNEAC30QZD3P white or black 30 amp 277VAC UL1077 triple pole $54 1.5 wide
MNEAC50QZD3P white or black 50 amp 277VAC UL1077 triple pole $54 1.5 wide

MNEDC80 $20 80 amp 125VDC Panel Mount. ¼ studs / ¾ wide <1 Lb.
This is the same as the OBDC panel mount breakers available elsewhere (comes with mounting screws)

MNEDC125 $54 125amp 125VDC ¼ studs / 1 wide panel mount 2 Lbs.
This is the same as OBDC panel mount breakers available elsewhere but with ¼ studs (comes with mounting screws)


MNEDC175 & MNEDC250 $109 125VDC 3/8 studs 1.5 wide panel mount 3 Lbs Same as OBDCs Apollo kit
Apollo kit 240


Apollo kit
(for T80 and higher amperage breakers)
: includes a left side bracket for all E-Panels, two 80 amp breakers and

mounting hardware. Works with all E-Panels except the MNE174STM-240. $69 2 Lbs.
Apollo kit 240 White side panel for 240 volt E-Panels and two 80 amp panel mount breakers with hardware $69 2 Lbs.



Terminal Bus Bars
MNTBR (Red) Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws
MNTBW (White) Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws
MNTBB (Black) Four 1/0 & eleven #6 useable wire slots. Comes with two sizes of 10-32 screws
Bus Bar 4.63 UL and CSA recognized, Made in USA. Insulators ETL recognized, Designed by MidNite Solar
and Made in China $17.00 <1Lb. Remove the plastic insulators for ground bus applications.

Ground Bus Bar (model# MNGBB)
3.45 long with Green screws! Two 1/0 & seven #6 wire slots.
Comes with mounting screws
$12.00 Made in USA, UL and CSA recognized < 1