/font>
BALANCE OF SYSTEMS The new OutBack Power Systems PS2 is a compact power
system for one or two FX series inverter/chargers, up to
three MX 60 MPPT charge controllers, a Mate system con-
troller and all the associated AC and DC components of a
renewable energy power conversion system.
|
PS2DC Standard Features and Components
|
ETL listed indoor type powdercoated steel enclosure with
plenty of conduit knockouts
|
One OBDC circuit breaker: choice of 100, 175 or 250 amp
|
Knockouts for one additional inverter battery breaker and
eight 3/4 breakers
|
500 amp 50 mV DC current shunt standard
|
Battery negative/ground bus bar standard
|
Battery positive bus bar for DC loads and PV arrays
included standard
|
Mounting brackets for one OutBack MX 60 and an
OutBack Mate
|
Knockouts for battery conduit, MX 60 interconnect and
stacking another PS2DC
|
Mounting for a 120 mm
2
x 32 mm thick 12 V DC brushless
fan (powered by an FX inverter/charger)
|
For negative or positive ground systems
|
Knockouts on five surfaces to facilitate conduit and inverter
connections and additional
|
Grommets included for MX 60 and Mate wiring.
Technical data OutBack Power System PS2:
Model
PS2AC-50D
PS2DC-100
PS2DC-175
PS2DC-250
Standard Breaker
50 amp 120/240 V AC
100 amp DC breaker
175 amp DC breaker
250 amp DC breaker
bypass disconnect
Enclosure Size
18.5 H x 11.5 W x 9 D
18.5 H x 11.5 W x 9 D
18.5 H x 11.5 W x 9 D
18.5 H x 11.5 W x 9 D
Shipping Size
22 H x 15 W x 12 D
22 H x 15 W x 12 D
22 H x 15 W x 12 D
22 H x 15 W x 12 D
Shipping Weight
22 lbs (10 kg)
22 lbs (10 kg)
22 lbs (10 kg)
22 lbs (10 kg)
BALANCE
OF
SYSTEMS
Balance of systems | Technical data
OutBack Power System PS2
Available from:
For further information: www.conergy.us
Subject to technical changes
August 2005 © Conergy, Inc.
PS2-TD-USA-0508
|
PS2AC Standard Features and Components
|
ETL listed indoor type powdercoated steel enclosure
|
Dual 50 amp input/output bypass assembly
|
Dual 50 amp breaker for inverter AC input
|
One 20 amp AC breaker
|
One 15 amp AC outlet (mounts on side of cabinet) with
one 15 amp breaker
|
Ground terminal bus bar bonded to cabinet
|
One white insulated AC neutral terminal bus bar
|
Two black insulated bus bars for Hot AC IN and OUT Leg 1
|
Two red insulated bus bars for Hot AC IN and OUT Leg 2
|
Knockouts for 8 additional OutBack AC load breakers
|
Provisions for mounting an X-240 and 120 mm brushless fan
|
Knockouts on five surfaces to facilitate conduit and
inverter connections
PS2 4 to 7 kW Power System