llpadding=0 cellspacing=0 width=100%>
Yahoo! is not affiliated with the authors of this page or responsible for its content.
Access Dual Roller FlexShade Submittal/Planning Sheet Copyright ©2007 Draper Inc. Form AccessDualRollerFlexShade_Sub07-R3 Printed in U.S.A.
Access Dual Roller FlexShade
Submittal/Planning Sheet
Select Headbox Delivery Options:


Headbox First, Shades/Screen Later


Complete Unit (including headbox and shades)


Brackets onlyNO HEADBOX
IM MeasureDraper makes
deductions for clearance within opening.
OM MeasureNo deduction made.
Width shown will be overall dimension.
How will this be installed?


Suspended Mount

Above (recessed) or below ceiling?



Above

Below


Ceiling Surface Mount



Outside Jamb
Inside Jamb


Wall Surface Mount



Outside Jamb
Inside Jamb
by
Brackets slide along case.
What are the measurements of the window opening (s)? Note: Please draw in dimensions for all windows to be covered
by this headbox. Dont forget to indicate location and dimensions of mullions. Attach drawings for additional headboxes.
PROJECT:
ARCHITECT:
CONTRACTOR:
SUPPLIER:
DATE:
REVISED:
Please make the appropriate selections under each numbered item.
Suspended Mount
Wall Surface Mount
Ceiling Surface Mount
110v-120v AC
Connection
Brackets Only (Clutch Shown) Indicate number and placement of shades on rear roller, and number and

placement of shades and/or Matt White screens on front roller (be sure to note

shade fabric styles and colors (see back page for viewing surface
speci cations; see Drapers Shade Fabric Reference Sheet for shade fabric
speci cations and colors) and screen materials and sizes (refer to chart at

right). Also indicate desired locations for couplers and junction boxes.

Nominal Image Overall

Diagonal Area
H
x
W Size
NTSC Video Format (3:4)

6'
42½" x 56½"
46½" x 59½"

7'
50" x 66½"
53½" x 69½"

100"
60" x 80"
64" x 83½"

10'
69" x 92"
73" x 96"

11'
78" x 104"
83" x 108"

150"
87" x 116"
92" x 120"

15'
105" x 140"
109" x 144"
HDTV Format (9:16)
92"
2

45" x 80"
49" x 83½"
106"
2

52" x 92"
56" x 96"

119"
58" x 104"
62" x 108"

133"
65" x 116"
69" x 120"

161"
79" x 140"
84" x 144"
WideScreen Format (1:1.85)

99"
47" x 87"
51" x 90"

108"
50" x 92"
54" x 96"

120"
56" x 104"
60" x 108"

132"
63" x 116"
67" x 120"

162"
76" x 140"
80" x 144"
AV Format Sizes
Size
H
x
W
50" x 50"
60" x 60"
70" x 70"
84" x 84"
72" x 96"
96" x 96"


Size
H
x
W
7' x 9'
9'
x
9'
8' x 10'
10' x 10'
9' x 12'
12' x 12'
Access Dual Roller Screen sizes
1
If you are specifying a Matt White projection screen as part of this unit,

please select from the following options:

Overall Screen Size (height x width):



Extra
Drop
(Total height cannot exceed 12'10' if unit is provided with LightBloc)


Select white or black



Length of extra drop:



Black Masking Borders (standard on NTSC Video format screens. These borders decrease


the image width of AV format screens through 70" x 70" by 3", and by 4" on larger AV format


screens; height is increased 1½" through 70" x 70", and 2" on larger.)
Select Headbox Accessories:


Junction Box



# of Junction Boxes required (must be located inside headbox, above motor)


End Caps


Ceiling Tile Flange (for recessed installationscheck all that apply)


Flange on Front of Headbox



Flange on Left End Cap



Flange on Right End Cap
Page 2 of 4
Access Dual Roller FlexShade by Draper
Please Note: Surfaces and fabrics can be placed anywhere in the headbox. Fabric or screen
can be no closer than
13
/
16
" to either end of the headbox.
1
Custom sizes also available.
2
These HDTV sizes include 12 black drop as
standard.
Optional ceiling tile flange
for recessed installations
Optional junction box
for electrical connection
Optional End covers
(dashed line)
Front
Rear
110v-120v AC
Connection
Optional J-Box
Red
White (Common)
Black
Green Ground)
Red
White (Common)
Black
Green Ground)
Motors
To Controls
SOMFY
SOMFY
SOMFY
SOMFY
Access Dual Roller FlexShade
J-Box-to-Motor Connections
J-Box
Screws for securing
plug to motor
Screws for securing
plug to motor
www.draperinc.com
(765) 987-7999 Access Dual Roller Wiring Diagram*
* This diagram is for standard switching for one roller
in the Access Dual Roller FlexShade. This diagram
will need to be followed for both rollers. For wiring
diagrams of optional controls, contact Draper, Inc.
Access Dual Roller Dimensions
Page 3 of 4
Access Dual Roller FlexShade by Draper
Slat Bar
Mesh Fabric Width
Slat Bar
Clear Opening
LightBloc Cloth Width
Unit Width
Overall Width
With Headbox = Cloth Width + 1¾"
Brackets Only = Cloth Width + 1
5
/
8
"
Ov
er
all Height
Height belo
w ceiling
9

1
/
2
"
2

3
/
4
"
1

3
/
16
"
3
/
4
" optional ceiling flange
for recessed installations
6
3
/
4
"
3
13
/
16
"
Select Operators: (Front and back rollers will have the same type operator)


Electric Motor*


Clutch



Metal Bead Chain (standard)



Nylon Chain




Ivory




Grey




Black


Crank



Permanent Crank (Standard)



Detachable Crank
Do you want side and sill channels on rear shade?


Yes

No


If Yes, select Style:



LightBloc

"L" Angle (Select Sizecircle one: 1" x ¾" or 1" x 2¾")


If Yes, select mounting option:



Jamb

Surface

Select Finish:



Dark Bronze

Clear
Anodized
Black



Ivory

White


Rear shade without side/sill channels
Electric Motor Operator
Bead Chain Clutch
Crank Operator

Control Options:

110-120v Wall Switch for Single Unit Control

Low Voltage and/or Multiple Shade Control: Please see Draper's IntelliFlex Controls Reference Sheet to design a control solution for this product. The

form is available at www.draperinc.com, or by contacting Draper.
www.draperinc.com
(765) 987-7999
Internal Shade Wiring
White (Common)
Black
Red
Green (Ground)
Control
switch
Single gang box by others
Min. 4" x 2

1
/
8
" x 1

7
/
8
" deep
Red
Black
Black
To 110-120V Line
Dashed wiring by electrician
NOTE: Test shade operation. If shade direction
does not correspond with the switch orientation,
turn power back off and switch the red and black
wires from the motor to the switch.
7
1
/
8
"
4
1
/
2
"
4
1
/
2
"
1
1
/
4
"
3
7
/
16
"
1
1
/
2
" Access Dual Roller FlexShade System:
Two rollers within a single pocket style headbox. Headbox of extruded aluminum
alloy, painted white on bottom and front. With or without ceiling tile lip. Removable
bottom closure attaches without exposed fasteners. Available in stock lengths for
installation ahead of shades and screen. Grooves extruded along the top of box
allow brackets to be inserted to accommodate suspension style mounting. Boxes
may be pre-wired with factory installed junction boxes. Patent No. 6,421,175. Other
patents pending.
Method of Operation
NOTE: Both shades in headbox must have the same operator type.
Electric Operator: Drive unit inside roller, to be 3-wire, instantly reversible, lifetime
lubricated. Right or left hand motor location available. Push button style adjustable
limit switches, thermal overload protector, and electric brake. Operates on 110-
120V AC 1 ph. 60 hz. current. Draws 1.1 amps.
Bead Chain Clutch Operator: High carbon steel and molded berglass-reinforced
polyester thermopolymer (PBT). Bi-directional for mounting at either end of roller.
Control loop, of any length, is a stainless steel or plastic bead chain (stainless steel
standard). Plastic chain in ivory, grey, black. Never needs adjusting. Lower clutch
mounted opposite end of upper clutch.
Crank Operator: Gear box, of die cast aluminum and steel, has ratio of 3.0 to 1.
Bidirectional to mount at either end of roller. Never needs lubrication or adjustment.
Crank handle assembly, of anodized aluminum and chrome plated steel, up to 6' in
length, detachable or permanently mounted. Heavy-duty crank optional in lengths
to 10'. Optional 2-Piece crank handle available for shades 14' or more above oor.
Crank roller insert, of injection molded nylon and steel, is installed in the roller and
engages to gear box.
Page 4 of 4
Access Dual Roller FlexShade by Draper
Downloadable 3-part speci cations available at www.draperinc.com.
Hardware
Rollers (except spring rollers): Sizes 2" dia. x .080 wall, in steel or extruded
aluminum. Roller assembly easily removable.
Mounting Brackets: Steel stampings, which twist into grooves in the top of the
headbox and can then be slid into the proper locations. Patent No. 6,2532,109.
Roller Idler Assembly: Type 6/6 injected molded nylon and a zinc-plated cold
rolled steel pin. Sliding pin for easy installation and removal of the roller.
Coupler Assembly: Couplers: Type 6 nylon. Coupler pins: 1018 zinc plated steel.
Coupler bracket: 1018 zinc plated steel with center bronze bushing. Allows for one
motor or crank operator to drive up to two additional shade rollers. Overall width of
group not to exceed (30' motorized/20' manual). Coupler Assembly to t 2" or 3" dia.
rollers with adjacent rol