hive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
Marco PG internal
C
A
L
L
1
-
8
0
0
-
B
L
A
S
T
-
I
T
2 0 0 6 PA R T S G U I D E
Effective: April 1st, 2006
A
B
R
A
S
I
V
E
S
B
L
A
S
T
I
N
G

P
A
I
N
T
I
N
G
see page 54
see page 56
see page 64
see page 66
see page 68
Exclusive
MB30
DISTRIBUTOR
Bullard
®
MB30
*
Respirator
Exclusively Distributed by Marco!
The MB30 is a light duty, supplied air respirator providing excellent respiratory
protection in general purpose applications such as: painting, glass etching,
monument blasting, automotive and aircraft body repair, architectural, furniture
and ornamental paint removal.
*See page 9 for more MB30 information.
MB30 Respirator w/F30B Constant Flow
for use with High Pressure -
see page 9 2
0
0
6

P
A
R
T
S
G
U
I
D
E
W
W
W
.
M
A
R
C
O
U
S
A
.
C
O
M
i
Terms and Conditions
Marco will fulfill orders solely upon the terms set forth below. These terms and conditions shall supersede any provisions, terms and
conditions contained on any purchase order, confirmation or other writing Buyer may give or receive which are hereby deemed refected, and
the rights of the parties shall be governed exclusively by the provisions, terms and conditions hereof. Marco makes no representations or
warranties concerning products ordered except such as are expressly contained herein, and these terms may not be changed or modified
orally.
1. Changes in Price, Terms. While we strive to provide advance notification, all policies, products, product designs, prices and vendor
representations are subject to change without notice. For current pricing and delivery arrangements, please call your account manager.
2. Terms of Payment. With approved Credit, terms are: Cash net 30 days from the date of shipment. Payments not made when due shall
bear interest at the rate of eighteen percent (18%) per annum, compounded monthly, or the rate permitted by law, whichever is greater.
Except as provided herein or upon the express written authorization of Marco, payment due hereunder shall not be subject to any reduction
or offset of any kind. Shipment shall be by Marcos regular method of shipment, unless special arrangements are made by Buyer. Unless
otherwise stated in this catalogue, all prices are F.O.B. origin. Identification of the goods to the contract shall occur as each shipment is
placed in the hands of the carrier. Orders are subject to a $5.75 handling charge. Contact your account manager regarding freight paid
order eligibility.
3. Delays. Delivery shall be subject to, and contingent upon, strikes, labor difficulties, riot, civil unrest, war, fire, delay or defaults of
common carriers, failure or curtailment in Marcos usual sources of supply, governmental decrees or orders, or, without limiting the
generality of the foregoing, any other delays beyond Marcos reasonable control, and Marco shall not be liable for any loss or damage
arising therefrom, even if Marco has been informed of the possibility of such damages.
4. Warranties. Marco warrants that the products it manufactures will be free from defects in material and workmanship for a period of
one (1) year from the date of shipment to the Buyer. Goods other than those manufactured by Marco will be subject to the original
equipment manufacturers warranty in effect at the time of shipment.
5. Claims of Damage/Warranty Service. Buyer must report non-conforming merchandise or shortages to Marco within three (3) days of
Buyers discovery thereof, by written notice setting forth the specific respects in which the products fail to meet the applicable warranty.
Upon receipt of such notice, Marco will, at its option, either modify or correct the non-conformity, replace the product with a conforming
product, or refund the amount paid for the non-conforming product, any one of which will entirely satisfy Marcos obligations under any
warranty which Marco makes. The foregoing shall constitute Buyers sole and exclusive remedy for breach of any warranty made by Marco.
This remedy shall not be deemed to have failed of its essential purpose so long as Marco is willing to repair the product, replace it, or
refund the purchase price, provided that the product is under warranty.
6. Disclaimer of Warranties.
MARCO MAKES NO WARRANTIES WITH RESPECT TO ANY GOODS DELIVERED TO BUYER EXCEPT AS SET FORTH
ABOVE. MARCO MAKES NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO ANY
OF THE GOODS, AND MARCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES AGAINST INFRINGEMENT. MARCOS WARRANTIES SHALL
NOT APPLY TO ANY DAMAGE OR NON-CONFORMITY RESULTING FROM THE NEGLIGENT OR IMPROPER ASSEMBLY OR USE OF ANY GOODS BY
THE BUYER OR ITS EMPLOYEES OR AGENTS, OR FROM ALTERATION OR ATTEMPTED REPAIR BY ANY PERSON OTHER THAN AN AUTHORIZED
AGENT OF MARCO OR THE ORIGINAL EQUIPMENT MANUFACTURER. ALL USED, REPAIRED, MODIFIED OR ALTERED ITEMS ARE PURCHASED
AS-IS AND WITH ALL FAULTS.
7. Limitation of Liability. In no event shall Marco be liable for any incidental or consequential damages, including loss of income or profit,
even if Marco has been informed of the possibility of such damages.
8. Returns And Credit. Goods must be thoroughly examined prior to accepting delivery. Concealed damage must be reported to the
carrier within thirty-six (36) hours of delivery. Do not discard any packaging material and report non-conforming merchandise or shortages
to Marco within three (3) days of receipt of shipment. Marco will not accept returns without written authorization. All returns require a
Customer Authorization Return (CAR) Number and are subject to a twenty percent (20%) restocking charge. Goods returned (except
pursuant to warranty) must be new and in saleable condition. Costs incurred to repair goods returned in unsaleable condition (except for
warranty service) will be deducted before any credit is issued. All returns except those pursuant to warranty must be shipped freight
prepaid. (The twenty percent (20%) restocking charge applicable to returns made outside of warranty will be waived if: 1) the product is
returned within one full year from the date of purchase; 2) an offsetting order of equal or greater value has been placed; 3) the product
is returned in its unopened, original packaging, and the product is not obsolete, custom produced or otherwise nonsaleable.) 2
0
0
6

P
A
R
T
S
G
U
I
D
E
ii
C
A
L
L
1
-
8
0
0
-
B
L
A
S
T
-
I
T
Credit & Collection Agreement
Unpaid balances are subject to 1.5% per month charge. Legal, travel, lodging and all other expenses, related to collecting unpaid balances,
will be added to amount owed.
Operator Safety
Do not use, rent or sell items shown in this parts guide until you have read all applicable instructions, warnings and Operator Manuals. The
complete operational understanding, of all items in this parts guide is the sole responsibility of the purchaser. Failure to comply may expose
persons to sever injury or death.
WARNING: Silicosis Warning
Breathing dust from silica sand causes silicosis, a fatal lung disease. Breathing dust during blasting operations may also cause asbestosis
and/or other serious or fatal diseases. A NIOSH approved, well-maintained supplied-air abrasive blasting must be used by anyone blasting,
anyone handling or anyone using the abrasive and anyone in the area of the dust. Harmful dust containing toxic material from abrasive or
surface being blasted (asbestos, lead paint, heavy metal paint and other toxins) can remain suspended in the air for long periods of time after
blasting has ceased. Follow all applicable OSHA standards.
Indemnification Agreement
Buyer agrees, to the fullest extent permitted by the law, to fully indemnify, hold harmless, and defend Seller, its parent, subsidiary, and
affiliated corporations, its owners, officers, directors, employees, agents, representatives and insurers (collectively, Indemnities) from and
against any and all claims, demands, suits, damages, judgments of sums of money, losses and expenses, including but not limited to
attorneys fees and costs (collectively referred to herein as Claims), arising out of or resulting from any bodily injury, sickness, disease or
death, or injury to or destruction of tangible property, arising out of or resulting from the use, sale or distribution of any and all products
purchased from Seller by Buyer herein, regardless of whether or not such claim arises in whole or in part out of Sellers alleged fault, including
but not limited to Sellers negligence, strict liability, products liability, breach of warranty or any other act or omission. Buyer expressly waives
any and all immunity from suit by Seller, its parent, subsidiary, and affiliated corporations, and its owners, officers, directors, employees,
agents, representatives and insurers, by operation of any workers compensation or similar statute.
Your purchase of any products from Marco
signifies your unqualified consent to and agreement with the foregoing indemnities. 6.0 cu/ft Blast Machine
F E A T U R E S A N D C O M P O N E N T S
Fill Opening
4 fill port for easy loading of abrasive
Large Foot Print
increase stability and
contact with work surface
Regulator
Metering Valve
clean out port allows
operator to dislodge
obstructions or
clogged abrasive
Muffler Design
easier to clean out & repair
Outlet Valve