,400 BpH MEYER ENERGY MISER
Tower Grain Dryers are Different By Design Proven, Fuel Efficient Technology
For Continuous Flow Grain Drying
For continuous flow grain drying, Brocks
MEYER ENERGY MISER Tower Grain Dryer
provides proven, fuel-efficient technology
you can count on for drying duties. This
Brock dryer offers capacities ranging from
1,000 to 2,400 bushels per hour with five
points of moisture removal.
Brocks line of tower dryers also provides
the advantage of being able to use height
as an option for adding drying capacity
without increasing the size of your dryers
ground footprint in your facility.
Multi-Mode Drying

All MEYER ENERGY MISER Tower Grain
Dryers utilize multi-mode drying. Producers
can choose: Full heat drying for maximum capacity
through the dryer. Pressure heat with suction cooling for
maximum efficiency and capacity
(saves up to 25% in fuel costs). Pressure heat with pressure cooling for
some crops like sunflowers and milo
where heat recycling is not desired.
These Brock dryers can handle: Standard grains. Sensitive grains. Volatile grains. Small grains (with the use of optional
.062-inch perforation galvanized
screens).
Few dryers can handle the wide variety of
grains like Brocks MEYER ENERGY MISER
Dryers without having to make time-
consuming physical modifications.
Features Include:
Wet Grain Garner Bin
Incoming grain is buffered for even
distribution to the drying columns.
Narrower Columns at the Top
Narrower width grain columns used at the
top of the dryer increase air flow on the
wettest grain to start the drying process
sooner.
Stainless Steel Screens
Wall screens are standard .094-inch perfora-
tion stainless steel outside and .078-inch
perforation galvanized steel inside. Optional
.078-inch perforation stainless steel outside
screens are available to confine particulates
for cleaner dryer operations. Optional
.062-inch perforation galvanized screens are
available for small grains.
Access Platforms
Access platforms with safety handrails
extend around the tower dryer.
Double-Inlet Centrifugal Fans
Industrial-grade, double-wide/double-inlet
(DWDI) centrifugal wheels quietly deliver
more air while using less horsepower. Fan
unit is accessible from ground level for easy
maintenance.
Full Flame-Wall Burner
Brocks stainless steel full flame-wall
burner provides a generous flame surface
and distributes heat evenly to the drying
air. This fuel-efficient burner provides uni-
form plenum temperatures to help maintain
top grain quality.
Unobstructed Grain Columns
Grain entering Brocks MEYER ENERGY
MISER Tower Dryer has an unobstructed
gravity flow to the bottom of the tower.
Fresh air along with electrical conduits and
gas piping enter at the bottom of the dryer
and not through the grain columns.
Steeping Section
A steeping section at the base of the heat
plenum allows the grain moisture and
temperature to equalize before cooling,
helping to minimize stress cracking in the
grain for improved kernel quality.
Grain Quality Option
A special patented MOISTURE EQUALIZER®
System is available for MEYER ENERGY
MISER Tower Dryers where producers are
striving for increased test weight and grain
quality.
Commercial Plumbing
Commercial grade gas train is standard.
Factory Pre-assembled
For U.S. and Canadian customers, Brocks
MEYER ENERGY MISER Tower Dryers are
factory pre-assembled and tested before
shipment to insure maximum quality,
reduced assembly time and trouble-free
operation.
Self-Cleaning Operation
Brocks unique, self-cleaning plenum floor
design allows particulate matter to recycle
back into the grain safely while also
reducing routine cleaning maintenance.
Gentle Grain Unloading System
Brocks innovative and gentle Circular Drag
Grain Unloading System (patented) evenly
meters grain from the grain columns and
gently delivers it to the unloading point at
the perimeter of the dryer. The speed of the
unloading system is automatically adjusted
to allow for moisture variations in the
incoming wet grain.
Advanced Dryer
Controller
Brocks advanced QUANTUM®
Dryer Controller comes
standard and is easy to use for
total dryer management. MEYER ENERGY MISER Tower Dryer Specif ications
Brock Grain Systems
A Division of CTB, Inc.
Milford, IN Kansas City, MO Frankfort, IN
Phone: 574.658.4191
Internet: www.graindryers.com
E-Mail: dryers@graindryers.com
BR-2060/0108
Dryer Model
1000S
1200S
1400S
1600S
1800S
2000S
2400S
Dryer
Diameter
Feet/Inches
11' 8"
11' 8"
11' 8"
11' 8"
11' 8"
11' 8"
11' 8"
Overall
Height
Feet/Inches
42' 10"
47' 10"
54' 1"
57' 10"
61' 7"
66' 7"
75' 4"
Grain
Column
Width
Inches
12 & 10
12 & 10
12 & 10
12 & 10
12 & 10
12 & 10
12 & 10
Double-Wide
Double-Inlet Blower
(Quantity horsepower)
2 - 30
2 - 30
2 - 30
2 - 40
2 - 40
2 - 50
2 - 50
Typical burner use at 60°
F./15.6° C. Suction Cool
(Million BTU / hr)
6.29
7.05
7.59
9.40
10.02
10.83
11.51
Unloading Motor
(Horsepower)
5
5
5
5
5
5
5
Dryer Model
1000S
1200S
1400S
1600S
1800S
2000S
2400S
Corn
Dry/Cool
20% to 15%
Bushels
per Hour
1,000
1,200
1,400
1,600
1,800
2,000
2,400
Corn
Dry/Cool
25% to 15%
Bushels
per Hour
600
720
840
960
1,080
1,200
1,440
Corn
Full Heat
20% to 15%**
Bushels
per Hour
1,670
1,860
2,070
2,380
2,520
2,730
3,030
Corn
Full Heat
25% to 15%**
Bushels
per Hour
990
1,110
1,230
1,410
1,500
1,620
1,820
*Drying capacities are the result of a combination of field tests and averages of customer-reported capacities. These capacities should be attainable in one pass with mature, unfrozen,
clean (maximum of 2% fines) grain when operating the dryer at the recommended drying temperature. Drying capacities will vary depending upon weather conditions, hybrid variety,
grain maturity, and cleanliness of the grain.
Grain Dryer Capacities*
**Final moisture in bin after steeping and cooling. Final moisture in bin can be affected by ambient conditions, steeping times and cooling rates.