=arial size=-1 color=black>

PP150AC & PP350AC OWNERS MANUAL
PP150AC &
PP350AC
HIGH SURGE POWER INVERTERS
THE WHISTLER GROUP
CORPORATE HEADQUARTERS
13016 N. Walton Blvd.
Bentonville, AR 72712
TEL (501) 273-6012 FX (501) 273-2927
www.whistlergroup.com
PRODUCT DEVELOPMENT CENTER
16 Elizabeth Drive
Chelmsford, MA 01824
TEL (978) 244-1400 FX (978) 244-1492
CUSTOMER RETURN CENTER
1201 N. Dixieland Rd.
Rogers, AR 72756
Consumer Relations Tel (800) 531-0004
Email: info@whistlergroup.com
P/N PP150/350MAN
©WHISTLER 2000 1
If you have questions concerning the
operation of this Whistler product
please call consumer relations:
1-800-531-0004
Hours:
Monday - Friday
8:00 am - 5:00 pm CT
Please keep the receipt in a safe
place. If the unit is returned without a
dated proof of purchase, an out of
w a rranty service charge applies.
Note: Your warranty period begins at
the time of purchase. The warranty is
validated only by your receipt.
Now is the time to record the serial
number of the unit in the space pro-
vided in the warranty section of the
manual.
INTRODUCTION
Dear Whistler Owner,
For many of us, a vehicle is more than just transportation. It
can be a mobile office, communications or entert a i n m e n t
c e n t e r, or simply an expression of our personality. Whistler
p roducts are designed to make the time you spend in your
vehicle more productive, more fullfilling, safer, or just simply
m o re fun. Our mission is to provide products that impro v e
your driving experience.
Whistler offers a complete line of DC to AC inverters
ranging in capacity from 150 Watts to 2500 Watts. These
inverters offer advanced technology, dependable operation
and will provide years of reliable service when used in accor-
dance with our operating instructions.
Your new Whistler Go AC power inverter allows you to ru n
most AC appliances right from your car, boat or RV. Theyre
g reat for weekend use and life on the road. Theyre also gre a t
for power outtages!
To fully acquaint yourself with the operation of the Whistler
PP150AC and PP350AC we recommend reading this entire
m a n u a l .
Sincerely,
THE WHISTLER GROUP WHISTLER FEATURES
A Word About WHISTLER GO AC Inverters.
WHISTLER inverters convert low voltage, direct current
(DC) to 110 volt alternating household current (AC). The
AC output is called modified sine wave. See Technical
Operating Principles section for more inform a t i o n .
Depending on the model and its rated capacity,
WHISTLER inverters draw power either from standard 12
volt automobile and marine batteries or from portable
high power 12 volt sources.
1.
AC Output Sockets
2.
On/Off Switch
3.
Power/Overload LED
4.
Power Cord
5.
Hardware Kit (PP350AC only)
3
Topic
Page
Features Summary......................................................................3
Important Information................................................................4
Inverter Basics.......................................................................5 - 7
Getting Started
Dont Push It
Operation............................................................................8 - 13
Making the Connection
Hard Wire Adapter Kit
Tips
Recharging Equipment
Changing the Fuse
Power Source
Additional & Safety Features...........................................14 - 15
Auto Shut Down
Thermal Cut Off
Low Battery Protection
Care & Maintenance.........................................................16 - 17
Technical Operating Principles........................................18 - 19
Operation Summary .........................................................20 - 21
Troubleshooting................................................................22 - 24
Specifications............................................................................25
Warranty Information........................................................26 - 28
TABLE OF CONTENTS
2
1
2
4
5
3 INVERTER BASICS
Getting Start e d
Power equipment and appliances which operate with motors
or tubes re q u i re an initial surge of power to get them up and
running. This power surge is re f e rred to as the "starting load"
or "peak load." (By comparison, electrical devices such as
s t a n d a rd light bulbs do not re q u i re a large starting load).
Once the equipment or appliance has been powered up, it
settles down to a slower pace and re q u i res far less electrical
power to operate. This lower power re q u i rement is re f e rre d
to as the "continuous load."
In order to ensure that the capacity of your WHISTLER invert-
er is sufficient to meet the re q u i red start up load, you must
first determine the power consumption of the equipment or
appliance you plan to operate.
Power consumption is rated either in wattage or in ampere s ,
and information re g a rding the re q u i red "watts" or "amps"
generally is stamped or printed on most appliances and
equipment. If this information is not indicated on the appli-
ance or equipment, check the owners manual. Contact the
appliance or equipment manufacturer to determine if
the device you are using (TVs, battery re-charger, com-
puter, etc.) is compatible with a modified sine wave.
If the power consumption is rated in amps, multiply the num-
ber of amps by 110 (AC voltage) to determine the compara-
ble wattage rating. As a general rule, you can determine the
re q u i red start up load by multiplying the wattage rating by 10.
For further information on the fundamental operating prin-
ciples of WHISTLER inverters and related technical data,
see "Technical Operating Principles"
5
IMPORTANT INFORMATION
Important Information About Your New WHISTLER
Inverter.
This manual will provide you with directions for the safe
and efficient operation of your WHISTLER GO AC 150
Watt or 350 Watt Inverter. Read the manual carefully
before using your new WHISTLER Inverter and keep the
manual on file for future reference.
Notes:
Your WHISTLER inverter is designed to operate from a 12
volt power source only. Never attempt to connect your
Whistler inverter to any other power source, including any
AC power source.

Do not attempt to connect the PP150AC Inverter
directly to the 12 volt power source other than using
the supplied adapter cord and plug or the optional
WHISTLER 12 volt hard wire adapter kit (Part Number
PP010DC). Do not attempt to modify the adapter cords, plugs or
any of the elements that comprise the PP350AC hard
wire adapter kit. 110 volts of current can be lethal. Improper use of
your WHISTLER inverter may result in pro p e rty
damage, personal injury or loss of life. Check with the appliance manufacturer for compati-
bility with modified sinewave inverters. Some
appliances may not work well or not at all. This is espe-
cially true for medical equipment. For more information
on compatibility issues, please visit our inverter FAQ page
at www.whistlergroup.com/faq-inverters.asp
4 INVERTER BASICS
Dont Push It.
Although your WHISTLER GO AC inverter has the capacity
to provide power output (excess current) equal to appro x i-
mately two times its rated wattage capacity for a very brief
period, it is designed to operate equipment and appliances
with start up load wattage ratings no higher than its own
maximum continuous wattage rating.
For example, the 150 model has a maximum continuous rat-
ing of 150 watts. Although this model has the capacity to
briefly provide up to 300 watts of power (that is, excess cur-
rent), it is designed to operate equipment and appliances
with start up load re q u i rements of 150 watts or less.
C o n s e q u e n t l y, if the start up load rating of your equipment
or appliance is the same or approximately the same as the
maximum continuous rating of the invert e r, the inverter will
attempt to start loads above the continuous rating for up to
10 seconds.
To determine whether your inverter will operate a part i c u l a r
piece of equipment or appliance, run a test. The inverter is
designed to shut down automatically in the event of a
power overload. Testing appliances and equipment with
s t a rt up load ratings comparable to your inverter wat