Gyro Compass System
rings.
The new Standard 22 combines proven technology and long mainte-
nance periods with most advanced features. A secure investment in
your ship for a long time.
Features
Products
Approved Technology
The Gyro Compass Standard 22 has been type approved in accordance
to the International Maritime Organisation (IMO) standards. In addi-
tion the Standard 22 has been approved to the High-Speed Craft Code
and as a rate-of-turn sensor according to IMO. A second Standard 22
can therefore replace a required rate-of-turn gyro.
Besides the main function as a heading sensor, the STD 22 Gyro
Compass System offers many features that provide additional value
and make the day-to-day work easier. The Gyro Compass Standard 22
comes with automatic speed / latitude error correction. Values for
speed and latitude are provided by sensors or entered manually via the
operator unit.
When using Quick Settling mode, the heading information is pro-
vided within just one hour after switching on.
The integrated course monitor compares the heading information
from up to four different compasses. An alarm is given, if an user-
dened threshold is exceeded.
In case of a gyro compass system alarm, the system switches auto-
matically to another compass as dened by the user. The central alarm
reset function allows a remote acknowledgment of audible alarms
meaning that an audible alarm of the Standard 22 can be muted direct-
ly at the operator unit or remotely via a central alarm panel.
The Standard 22 Gyro Compass is a modular system that was designed
to meet the individual requirements of our customers. The system
consists of the gyro compass, an operator unit and a distribution unit.
Up to three gyro compasses can be connected to a system. A magnetic
compass, the Standard 21 GPS Compass and an external rate-of-turn
gyro can be integrated as additional sensors.
Raytheon Marine also offers a fully redundant Gyro Compass System
that complies to DNV NAUT-AW and NAUT-OC. This system consists
of 2 gyro compasses, 2 operator units, 2 distribution units and one
change-over unit. No single failure in this system will cause loss of
heading information to the connected equipment.
High accuracy of 0.1 degrees
Quick Settling reduces the settling time to 1 hour
Manual and automatic speed / latitude error correction
Compass monitor and selector with automatic
switch-over (configurable)
Central alarm reset
Integration of magnetic compass, Standard 21 GPS Compass and
external rate-of-turn gyro
Short installation time and long maintenance periods
IMO approved as a rate-of-turn gyro
IMO approved for standard and High-Speed Crafts
Modular product range to meet individual requirements from a
single gyro compass to the fully redundant gyro compass system
Integrates seamlessly into your system environment due to a
multitude of interfaces and formats
Self aligning steering repeater with source indication
Self aligning bearing repeater with source indication
Digital repeater
Multi display
Different casings for IP44 and IP 56
Course and rudder angle printer
Course transducers for retrofit solutions
Benets
Distribution unit
Operator unit
Steering repeater
compass
Gyro compass
STD 22
Gyro 2
Gyro 1
STD 21 GPS
Processor unit
Distribution unit
Operator units
Redundant CAN-bus
Accessories
All rights reserved Printed in Germany
RM 801.90 e / L&S 0506
Subject to alteration due to technical
developments without notice.
Raytheon Marine GmbH
High Seas Products
D-24100 Kiel, Germany
Tel +49(0)4 31-30 19-0
Fax +49(0)4 31-30 19-291
Email sales@raykiel.com
www.raytheon-marine.de
Technical Data
Accuracy
Settle point error: 0.1x secLat., RMS
Static error: 0.1x secLat., RMS
Dynamic error: 0.4x secLat., RMS
(periodic roll and pitch+horizontal acceleration)
secLat.=1/cosLatitude
Supply voltage
24 V DC (12 36 V DC)
Power consumption
60 W to 120 W (start-up) sensor unit
36 W distribution unit
2.5 W operator unit
7 W per analogue repeater
General data
Permissible ambient temperature
Operation: 10 C to +55 C
Storage:
25 C to +70 C
without supporting liquid
Settling time: 1 h ( < 3) with
Quick settling
Rate of follow-up: admissible rate-of-turn of
the ship is unlimited
Permissible roll
and pitch angle: 45
Signal outputs
- 12x RS 422 individually configurable
as course bus
or NMEA 0183
- 3x step, 6 steps/degree, 35 V DC
common + or ,
total power
< 15 W
- 1x RS 232C for course printer
- Rate-of-Turn 10 V DC
RoT 30, 100, 300
Alarms
Built-in alarms: power failure, gyro failure
system failure
Alarm outputs: potential-free relay contacts
Central alarm reset
In accordance with
IMO A.424(XI), A694(17), A.526(13), A.821(19)
EN/IEC 60945, EN/ISO 8728, EN/IEC 61162
Weight
Master compass: 17.5 kg
Distribution unit: 5 kg
Operator unit: 1.5 kg
Type of enclosure acc. to IEC/EN 60529
Gyro compass: IP 23
Operator unit: IP 23 / IP 56 Front sided
Distribution unit: IP 22
Distribution unit
Operator unit
Steering repeater compass
Gyro compass STD 22