d>
71000 71004 71005 Performer Import EFI Nitrous Systems EDELBROCK NITROUS SYSTEMS
PERFORMER SPORT COMPACT EFI NITROUS SYSTEM

For Part Numbers 71000, 71004, & 71005
INSTALLATION AND OPERATION INSTRUCTIONS

Edelbrock Corporation
2700 California Street
Torrance, California 90503
Tech Line (800) 416-8628
Tech Fax (310) 972-2730
E-Mail: edelbrock@edelbrock.com

Rev. 5/01 Thank You.
for purchasing an Edelbrock Nitrous Oxide Injection System.

Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested,
on the market today. With the use of nitrous oxide come some important safety considerations. This
manual has been written to help you during the installation and use of your Edelbrock Nitrous System.
Please read it completely before you install and use your system. Please pay close attention to the
safety information at the beginning of each section. The information contained there specifically pertains
to each of the components and installation methodologies within the section.

Please take the time to read and understand the following.

By installing your Edelbrock Nitrous System, you indicate you have read this document and you agree
with the terms stated below:

It is the responsibility of the purchaser to follow all installation instruction guidelines and safety
procedures supplied with the Edelbrock Nitrous Systems. It is also the responsibility of the purchaser to
determine the compatibility of the product with the vehicle or the device on which the purchaser intends
to install it.

Edelbrock Corporation assumes no responsibility for damages occurring from misuse, abuse, improper
installation, improper operation, lack of responsible care, or all previously-stated reasons resulting from
incompatibility with other manufacturers products and/or systems.

Edelbrock Corporation neither recommends nor condones the use of products manufactured or sold by
Edelbrock Corporation for use on vehicles, which may be driven on public roads or highways, and
assumes no responsibility for damages incurred by such use.

Edelbrock Corporation assumes no responsibility for damages incurred by the use of products
manufactured or sold by Edelbrock Corporation on vehicles used for competition or racing.

Edelbrock General Warranty

It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products
obtainable. Edelbrock warrants each new product, except Performer Series Carburetors, Race Division
Parts, Tubular Exhaust Systems, RPM Series Mufflers, Cat-Back Systems and Performer IAS Shock
Absorbers which are warranted separately, to be free from defects in both workmanship and material for
a period of one (1) year from the date of purchase, provided that the product is properly installed,
subjected to normal use and service and that the product is not modified or changed in any way,
negligence by customer or installer or used for racing or competition purposes.

Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503.
Customers who believe they have a defective product should either return it to the dealer from which it
was purchased or ship it directly to Edelbrock along with proof of purchase and a complete description
of the problem. The product must be returned freight pre-paid. If a thorough inspection of the product
by the factory indicates defects in workmanship or material, our sole obligation shall be to repair or
replace the product. Warranty covers only the product itself and not the cost of installation or removal.

Edelbrock Corporation shall not be liable for any and all consequential damages occasioned by
the breach of any written or implied warranty pertaining to this sale in excess of the purchase
price of the product sold.

If you have any questions regarding a product or installation, please contact our Technical
Department, toll free at 1-800-416-8628 from 7:00am to 5:00pm PST, Monday through Friday.

Thank you again for choosing Edelbrock Nitrous Systems.
PERFORMER SPORT COMPACT EFI SERIES NITROUS SYSTEM
Table of Contents

Page #

a. Before You Install Your Edelbrock Nitrous System ......................................2

b. What is Nitrous Oxide? ..............................................................................3

c. Safety Tips for Working with Nitrous Oxide .................................................3

1.0 Introduction to the Edelbrock Nitrous Systems Kit
1.1 General Information ..................................................................................4
1.2 Jet Map Information ..................................................................................5
1.3 Engine Operation Considerations ..............................................................5
1.4 Performer Sport Compact EFI Series Nitrous System Bill of Materials .........6


2.0 Performer EFI Series Nitrous System Installation
2.1 Nitrous Bottle Mounting .............................................................................7
2.2 Nitrous Bottle Mounting Instructions ...........................................................8
2.3 Nitrous Bottle Orientation ..........................................................................8
2.4 Nitrous Bottle Installation ...........................................................................9
2.5 Nitrous Feed Line Mounting .....................................................................10
2.6 Solenoid Mounting ..................................................................................10
2.7 Nitrous Spray Nozzle Installation .............................................................11
2.8 EFI Vacuum Tee Installation ..................................................................12
2.9 Fuel Pressure Safety Switch Installation ...................................................12

3.0 Electrical System Installation


3.1 Electrical Components Bill of Materials (BOM) ..........................................13

3.2 Nomenclature Descriptions ......................................................................13

3.3 Electrical System Wiring Diagram ............................................................14

3.4 Electrical System Installation Procedures .................................................15

3.5 Relay and Fuse Holder Installation ...........................................................15

3.6 Arming Switch and Installation .................................................................16

3.7 Microswitch Installation and Wiring ...................................................... 16-17

3.8 Final Electrical Installation Recommendations ...........................................17

4.0 Before You Run Your Edelbrock Nitrous System

4.1 Fuel System Check .................................................................................18
4.2 Nitrous System Check .............................................................................18

5.0 Troubleshooting and Routine Maintenance ..................................
19-21

EDELBROCK NITROUS SYSTEMS

Page 1
Before You Install Your Edelbrock
Nitrous System


Please read this Installation manual fully before installing this system.


You will need to have available the following tools:

Hand Tools Socket set including ratchets and extensions Screwdrivers Pliers Bench vise Wire crimping pliers, wire strippers Floor jack Vehicle jack stands Safety glasses

Power Tools Power drill Drill bits (1/4, 1/2 and 3/8)

You should understand the following skills: Power tool safety procedures Undercar safety procedures Proper measuring techniques Proper electrical assembly techniques Basic engine operation and tuning


'