on from DICE!
Connect the iPod to your vehicle's factory entertainment system and hear what an
iPod should sound like. CD quality sound* and controls from your radio, steering
wheel or the iPod. DICE keeps your iPod charged and ready to go. Radios
supporting CD-text will also display text from your iPod, allowing you to view song
title and artist name right on your radio's display.** Please note that FM-RDS text
display does not guarantee CD-text support!
* Sound quality depends on the quality of the music on the iPod.
** CD Text may not be available on all text capable radios. Check compatibility guide for complete details.
Getting Started.
Is Your iPod Up To Date?
Before you start, please check your iPod firmware version. For a complete list of
supported iPod firmware versions, please visit
.
http://support.diceelectronics.com
Connection Diagram.
2
2
4
4
5
5
Important!
Dip Switch Configuration.
To take full advantage of our quick music browsing system, you must have your music
organized in playlists on your iPod before using your DICE iPod Integration Kit.
3
3
Car Configuration Switch.
The features of this switch are currently inactive.
The dip switches located on the DICE module are used to configure how the iPod will
interface and function with the radio.
ON
1 2
ON
1 2
Switch in OFF
position
Switch in ON
position
"iPod Config.
Switch"
"Car Config.
Switch"
ON/OFF Switch Positions
Selected Mode
1
2
Default
OFF
Dip Switch #
Position
OFF
iPod Configuration Switch.
iPod
DICE Module
Dock Cable
Vehicle Specific
Interface Cable
Car Radio/Trunk CD
Changer connector
For detailed installation instructions, please visit
. Here,
http://support.diceelectronics.com
you will find the latest information and instructions regarding the installation of your DICE
Electronics iPod Integration Kit.
8-pin
Din
12-pin
molex
NOTE: - Verify proper alignment of plugs before inserting into the receptacles!
- External CD/DVD changer or SAT module MUST be disconnected!
SAT radio/
MP3 player/
DVD player
AUX
jack
Supported iPods.
iPod
Limitations
3G
4G
Photo
Video
nano
mini
Must have FW version 2.3 Does not support Albums and Chapters. FF/RW does not work from radio.
Must have FW version 3.1.1
Must have FW version 1.2.1
Must have FW version 1.1.1
Must have FW version 1.1.1
Must have FW version 1.4.1
Optional DSP package
may be required for
some BMW vehicles
CAUTION: There may be more than one 3-pin plug if the vehicle is cellular phone ready; see supplement!
Charging.
The DICE iPod integration kit automatically charges your iPods battery.
General operation of a GM radio with navigation
If display is already in TEXT mode.
PRESET 5
PRESET 1-6
PRESET 1
PRESET 2
PRESET 3
PRESET 4
PRESET 6
PRESET 5

SEEK TRACK
Track
changing
function
Playlist
changing
function
Album changing
function within
selected playlist
Chapter
changing
function for
audio books
Audio
sources
Firmware
version
number
DICE iPod
BAND
until
STEREO
SEL:IPOD
CH 12
DICE GM
Select
TITLE :
ARTIST :
SEL:IPOD
STEREO
SEL:AUX1
CH 12
DICE GM
Select
TITLE :
ARTIST :
SEL:AUX1
Easy access - GM radio with navigation
Press the BAND button to access the DICE interface and its features. Pressing
this button repeatedly will cycle through sources. When the DICE interface is
active, use PRESET and then select iPod audio source by pressing SEEK
TRACK.
5
rev. IGM032207
Vehicle with navigation
Vehicle without navigation
Selected Mode
1
2
with NAV
OFF
Dip Switch #
Position
OFF
Selected Mode
1
2
without NAV
OFF
Dip Switch #
Position
ON
Selected Mode
1
2
Dip Switch #
Position
OR
without NAV
ON
OFF
DICE iPod
BAND
until
NAV
RPT
NAV
BAND
Config
SEEK
XM1
XM
Info
XM
Options
10:45
STEREO
SPACIOUS
ARTIST * ALBUM
CH 12
DICE GM
Select
TITLE :
ARTIST :
ARTIST * ALBUM
SONG TITLE
PRESET 1
PRESET 2
PRESET 3
PRESET 4
PRESET 5
PRESET 6
Press
SEEK
TRACK to
perform
the action
within the
selected
function.
Press the arrows twice
to engage RW or FFW.
Or press the arrows
once and then press
select to engage RW
or FFW.
Source
selector
PRESET 1
PRESET 2
PRESET 3
PRESET 4
or
or
or
SEEK
Turn to
change
TRACK.
Make sure that the XM info T/O and the Category Seek are OFF.
If the module is inoperative after your visit to the GM dealership for service, cycle the
ignition 5 times to reinitialize the module. 6
6
Auxiliary Input.
AUX Source Settings.
The auxiliary input has settings for gain, bass and treble in order to optimize sound.
Gain.
Should be adjusted if the input level from the auxiliary device is too low or to high.
If you hear distorted audio while playing the auxiliary device, you need to reduce (-) the
gain setting. If you notice the audio is too quiet while listening to an auxiliary device, the
gain setting should be increased (+). Default settings are "50" ("68" is default for gain)
and values may be adjusted between 01-99.
Bass, Mid and Treble.
Should be adjusted to personal preference.
Selected Mode
Next
Previous
PRESET 1
PRESET 2
PRESET 3
PRESET 4
gain +
bass +
mid +
treble +
gain -
bass -
mid -
treble -
Radio Buttons and Features

Important Disclaimer, please read!
Driving is dangerous and requires concentration. Do not allow the DICE iPod Integration Kit to
distract you from prevailing traffic conditions. If in doubt, only operate the unit when stationary
or ask a passenger to operate it for you.
Do not submerge or expose to water or other fluids. DICE components are NOT water resistant
and will be damaged by water. You must properly insulate its casing if your installation
environment may subject the unit to water, such as a convertible vehicle.
Keep away from children !
DICE components may contain small parts, can be broken or disassembled and components
may become loose from vibration and heat. Small components and packaging materials may be
a choking hazard when handled by children.
Unauthorized reproduction or reverse engineering is strictly prohibited ! Intellectual property
included is distributed under specific license agreement with respective vendor(s). No warranty,
explicit or implied, is stated and neither DICE Electronics, LLC., nor any of its distributors,
dealers or vendors shall be liable for damages. IN NO EVENT SHALL DICE ELECTRONICS'
LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.DICE
Electronics, LLC. is a trademark. All other products are registered and copyrighted by their
respective owners.
Warranty and Support.
DICE Electronics products carry a one year limited warranty that protects you from defects in
material and workmanship of products sold by DICE Electronics or its authorized agents,
distributors and dealers. We do not warrant any installation. If you experience any problems or
need help, please contact your DICE Electonics retailer.
Proof of purchase is required.
Warranty does not cover normal tear and wear, damages due to negligence, improper
installation or operation.
Making the Adjustments.
While listening to the auxiliary device, the
next/previous buttons will adjust gain, bass,
mid and treble. The DISC 1-4 modes select
what functionality your next/previous
buttons will have. See the matrix for the
complete list of what each mode does.
ie. When you select DISC 1, pressing the
next/previous button will adjust +/- gain settings. If
you select DISC 2, the next/previous button will
adjust +/- bass settings.
+
Disclaimer.
Selecting the AUX Source.
Selecting
5 and then pressing the next track or previous track buttons will toggle
PRESET
between the iPod and an auxiliary audio device. Auxiliary device support doesn't include
controls from the radio or charging. While DISC 5 is selected track 1 indicates that the
iPod is selected and track 2 indicates that the AUX source is selected.
8
8
9
9
10
10
11
11
General operation of a GM radio without navigation
AUX Source Connections.
These are examples of component cables that can be used to connect an AUX
device to the DICE module. These cables can be found at any stereo shop and are
not included in this kit.
OR
Tip (Left audio)
Ring (Right audio)
Sleeve (Ground)
Left RCA
Right RCA
1/8" Male Stereo
1/8" Male Stereo
To DICE Module
To auxiliary device
A Ground-Loop Isolator (not included) may be required when the auxiliary device is
charged/powered from the vehicle's 12V battery source. This additional part can be
found at Radio Shack (Cat.No. 270-054) and will eliminate unwanted noise caused
by ground loops.
R
Tip (Left audio)
Ring (Right audio)
Sleeve (Ground)
1/8" Male Stereo
To DICE Module
Ground-Loop
Isolator
To auxiliary device
Radio Shack (Cat.No. 270-054) or
equivalent recommended.
Both in XM1 and XM2 audio source you can access and control your iPod from the radio, the steering wheel or the iPod. However, the TEXT displayed on the navigation
screen will change in each source. In the non-navigation radios press the DISP button to change between TEXT field.
TEXT display functions in GM radios with and without navigation (XM1 and XM2)
NAV
RPT
NAV
BAND
Config
SEEK
XM1
XM
Info
XM
Options
10:45
STEREO
SPACIOUS
ARTIST * ALBUM
CH 12
DICE GM
Select
TITLE :
ARTIST :
ARTIST * ALBUM
SONG TITLE
PRESET 1
PRESET 2
PRESET 3
PRESET 4
PRESET 5
PRESET 6
NAV
RPT
NAV
BAND
Config
SEEK
XM2
XM
Info
XM
Options
10:45
STEREO
SPACIOUS
SONG TITLE
C