width=100% bgcolor=ccccff> « back to results for ""
Below is a cache of http://www.jedec.org/download/search/jep120a.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
JEDEC STANDARD JEDEC
STANDARD
Index of Terms and Abbreviations
Defined in JEDEC Publications
JEP120-A
(Revision of JEP120)
MAY 2000
JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE
JEDEC standards and publications contain material that has been prepared, reviewed, and
approved through the JEDEC Board of Directors level and subsequently reviewed and approved
by the EIA General Counsel.
JEDEC standards and publications are designed to serve the public interest through eliminating
misunderstandings between manufacturers and purchasers, facilitating interchangeability and
improvement of products, and assisting the purchaser in selecting and obtaining with minimum
delay the proper product for use by those other than JEDEC members, whether the standard is to
be used either domestically or internationally.
JEDEC standards and publications are adopted without regard to whether or not their adoption
may involve patents or articles, materials, or processes. By such action JEDEC does not assume
any liability to any patent owner, nor does it assume any obligation whatever to parties adopting
the JEDEC standards or publications.
The information included in JEDEC standards and publications represents a sound approach to
product specification and application, principally from the solid state device manufacturer
viewpoint. Within the JEDEC organization there are procedures whereby an JEDEC standard or
publication may be further processed and ultimately become an ANSI/EIA standard.
No claims to be in conformance with this standard may be made unless all requirements stated in
the standard are met.
Inquiries, comments, and suggestions relative to the content of this JEDEC standard or
publication should be addressed to JEDEC Solid State Technology Association, 2500 Wilson
Boulevard, Arlington, VA 22201-3834, (703)907-7560/7559 or www.jedec.org
Published by
JEDEC Solid State Technology Association 2000
2500 Wilson Boulevard
Arlington, VA 22201-3834
This document may be downloaded free of charge, however EIA retains the
copyright on this material. By downloading this file the individual agrees not to
charge for or resell the resulting material.
PRICE: Please refer to the current
Catalog of JEDEC Engineering Standards and Publications or call Global Engineering
Documents, USA and Canada (1-800-854-7179), International (303-397-7956)
Printed in the U.S.A.
All rights reserved PLEASE!
DONT VIOLATE
THE
LAW!
This document is copyrighted by the Electronic Industries Alliance and may not be
reproduced without permission.
Organizations may obtain permission to reproduce a limited number of copies
through entering into a license agreement. For information, contact:
JEDEC Solid State Technology Association
2500 Wilson Boulevard
Arlington, Virginia 22201-3834
or call (703) 907-7559 JEDEC Publication No. 120-A
-i-
I
NDEX OF
T
ERMS AND
A
BBREVIATIONS
D
EFINED IN
JEDEC P
UBLICATIONS
(Formulated under the cognizance of JC-10 Committee on Terms, Definitions, and Symbols.
The concept for this publication was approved under Council Ballot JCB-94-53.)
1 Purpose
This publication provides an index of terms that are defined in certain JEDEC publications. It is
intended to promote the uniform use of these terms and their definitions while reducing the
proliferation of new definitions for old terms.
This publication should be used in conjunction with the latest issues of JEDEC Publication No.
104, Reference Guide to Letter Symbols for Semiconductor Devices , and ANSI/IEEE Std 100,
Dictionary of Electrical and Electronics Terms.
2 How to use
For ease of use, terms are arranged in strict alphabetical order without regard to spaces or
hyphenation; numerals are treated as if they were spelled out. Usually, terms are shown as they
appear in the source document. An exception has been made for transistor and thyristor terms
from JESD77. There, many terms are located by symbol rather than alphabetically and the same
basic concept appears repeated with different adjectives. To reduce redundancy in this index,
many terms taken from JESD77 are shown with the following adjectives removed:
ac, collector- base, collector- emitter, common-base, common-collector, common-drain,
common-emitter, common-source, dc, emitter- base, large-signal, open-circuit, short-circuit,
small-signal, static, etc.
After each term, the JEDEC publication and clause (section) or subclause (subsection) is shown
where the definition, and, in many cases, the abbreviation or symbol for the term may be found.
Titles of all referenced documents are given in the back of this publication. When more than one
reference is cited for a term, users are cautioned to use the proper referenced document for the
definition to be applied for any specific device.
Note that definitions contained in an informative annex (appendix) are not a formal part of a
standard but are included for information only. JEDEC Publication No. 120-A
-ii- JEDEC Publication No. 120-A
Page 1
Term
Document
Clause
A
A...................................................................................................................... see acceleration factor
A...................................................................................................................... see address inputs
A or a............................................................................................................... see anode terminal
abbreviation .................................................................................................... JESD77-B ......................... 1.1
abbreviation .................................................................................................... JESD99-A ......................... 2.1.1
absolute accuracy error .................................................................................. JESD99-A ......................... 2.5.2.4
absolute maximum rating ................................................................................ JESD77-B ......................... 2.1
ABTxxx series ................................................................................................. JESD54............................. 2
acceleration factor (A) ..................................................................................... JEP122 ............................. 3
acceptance inspection .................................................................................... JESD16-A ......................... 5.1
acceptance procedure .................................................................................... EIA-554............................. 3.2
accept number (c) ........................................................................................... JESD16-A ......................... 5.2
access time ..................................................................................................... JESD100-B ....................... 2.2
ac controller .................................................................................................... JESD14............................. 3.1
accumulation layer .......................................................................................... see layer, accumulation
accumulator..................................................................................................... JESD100-B ....................... 1
accuracy.......................................................................................................... EIA-557-A ......................... A
accuracy.......................................................................................................... JEP132 ............................. B
accuracy, long-term......................................................................................... see instability, long-term
ac terminal....................................................................................................... JESD14............................. 5.1
ac test ............................................................................................................. JESD12-1B ....................... 3
ac test ............................................................................................................. JESD99-A ......................... 1.2
activation energy ............................................................................................. JEP122 ............................. 3
active circuit element ...................................................................................... see circuit element, active
active component (of a hybrid integrated circuit) ............................................ see component, active (of a )
active desiccant ...