napshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
general specifications ?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Keyboard : Mini DIN (PS/2) connector. Console
supports PC compatible keyboards
Video Output : 15 Pin D type SVGA connector for
monitor with 1024 x 768 non interlaced display
60Hz refresh rate.
Desk Lamp : 1 XLR3 fixed socket. Lamp
dimmable under processor control.
SMPTE (Where fitted) : XLR3 fixed plug input and
output. Output 0dBm, Input 0 dBm +/- 10 dBm.
47KOhm input impedance, max 50V RMS
Remote Triggering : 8 Pin DIN connector providing
6 remote switches (common ground)
Dimensions : 800mm(W) x 305mm(D) x 85mm(H)
Weight : 9.6Kg
Operating Manual
Power Supply
Desk Cover
OS Disk
Illusion 500 (230v) : 00-342-01
SMPTE/MIDI/DMX IN Upgrade Kit : 00-364-01
PS/2 Mouse : 00-345-00
PS/2 Keyboard : 00-346-00
15" SVGA Monitor (230v) : 00-372-00
Gooseneck Light : 00-293-00
Illusion 500 Flight Case : 00-350-00
Monitor Flight Case : 00-374-00
Illusion 500 Package (230v) : 00-394-00
MIDI Connectors (Where fitted) : 2 x 5 pin 180
DIN (IN & Thru)
(consisting of : 1 x Illusion 500, 1 x monitor, 1 x keyboard,
1 x mouse)
supplied accessories
Ordering Information
Certified
general specifications
description
main features
specifications
For too long the creativity of lighting professionals
has been stifled by the limitations of lighting
control. The Illusion® has been designed to
challenge this status quo. Using leading edge
technology, exceptional graphics and user
definable modes of operation, the Illusion®
performs as a fast, effective lighting tool.
®
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
512 Control Channels
Dimmer, Scroller & LTP Control
Go Button Playback
Remote Triggering
400 Cues
108 Submasters
High Resolution Graphics
SMPTE/MIDI/DMX IN Option
Unique Cueline
Interface
Control Channels : 512
Submaster Faders : 12
Submaster Pages : 9
Memory Master Faders : 1
Manual Playbacks : 2
Auxiliary Controls : 4
Available Memories : 400
Channel Groups : 20
Macros : 10
Power Supply : In-line switched mode power
supply with CEE22 mains inlet. Connection
to console via XLR4.
Supply Voltage : 100 - 250 VAC
DMX Output : DMX 512 via Twin XLR 5 fixed
socket. Data output to USITT DMX-512 1990
Protocol. Data on channels 1-512 Overvoltage
protected with data indicators.
Audio Input : ¼ Stereo Jack >10Kohms,
100mV to 10V
Data Storage : 3.5" Floppy disk drive.
PC compatible, formatted to 1.44 Mb
Printer Port : PC compatible parallel port,
25 pin D type female connector
Mouse : Mini DIN (PS/2) connector
Zero 88 Lighting Ltd, Usk House, Lakeside Close, Llantarnam Park, Cwmbran, NP44 3HD, UK.
Tel : +44 (0) 1633 838088
Fax : +44 (0) 1633 867880
Email : enquiries@zero88.com
web : www.zero88.com
© Zero 88 Lighting Ltd. December 2002 (EU). Issue 1
E&OE. Zero 88 reserves the right to make changes to equipment and prices without prior notice. Certified
engineering specifications
electronics
operation
The lighting control console shall provide 512 channels
of lighting control. Any channel may be assigned to
dimmer, scroller or attribute control and may be patched
to any channel within the 512 channel DMX output
range.
The console shall have a high resolution graphical
user interface for all functions. The console shall be
controllable via it's own front panel or via an external
keyboard and mouse. Keyboard and mouse
connectors shall be mini DIN (PS/2) type.
The console shall have an internal real time clock and
an optional SMPTE and MIDI inputs for cue triggering.
The console shall have a connector allowing 6 external
switch connections to be made, these switches shall
be assignable to a selection of desk functions.
The console shall have 12 submaster faders which
may be assigned to 9 different pages. Full indication
of current page number shall be shown both on the
front panel and on the monitor.
The console shall have 12 submaster flash buttons
which may be assigned to 'flash', 'solo' or 'go' modes
of operations. These buttons shall be located below
the associated submaster fader.
The console shall have 4 direct access auxiliary control
buttons which may be patched to any DMX channel and
may have fade times and levels associated with them.
The console shall have a single memory master level
control and a manual override control for fade times.
The console shall have 'Go', 'Pause' and 'Go Previous'
buttons for memory stack control.
Channel inputs shall be made via a keypad, input
syntax shall be industry standard with a minimum of
'thru', 'and' and 'except' functions.
The console shall have a Grand Master fader to control
the overall output of all HTP channels. The console
shall have a blackout button to set all HTP channel
levels to zero instantly.
The console shall have the facility to record lighting
states and lighting sequences, the console shall record
fade times associated with these states.
The console shall have rear-mounted connectors for
the control outputs. The console shall be tested both
at assembly and at finished product stages and be soak
tested for a minimum of 12 hours.
The console shall utilise high resolution, colour
graphical user interfaces for programming and editing.
The console shall use a graphical representation of the
stored memories and provide facility for live and blind
programming of any stored state.
The console shall have a 'super user' mode containing
advanced functions.
The console shall have a selectable recovery option in
the event of a power failure.
The console shall undergo self-diagnostic checks during
start-up on both hardware and software and shall report
any faults to the operator.
The console shall provide the facility for future updates
of the operating system.
The console shall operate from a single phase supply.
Supply voltage for European variants shall be 100 - 250
VAC at 45-65Hz.
The console power supply shall be a universal switched
mode supply requiring no changes to internal links for
operation within the specified voltage ranges.
The lighting control console shall be designed to be free-
standing.The console shall be 800mm wide, 305mm deep
and 85mm in height. The console shall weigh no more than
9.6Kg.
All operator controls and displays shall be provided on the
top operating surface of the console.
The operating environment for the console shall be from
+5°C to +40°C.
electrical
mechanical
The chassis and removable base, for access to internal
electronics, shall be constructed of 1.2mm zinc-plated steel.
The control surface shall be constructed of 1.6mm zinc-
plated steel. The sides of the desk shall be injection
moulded ABS.
All metal surfaces shall be properly treated and finished in
specialist powder coat and the front panel details shall be
screen printed.
Zero 88 Lighting Ltd, Usk House, Lakeside Close, Llantarnam Park, Cwmbran, NP44 3HD, UK.
Tel : +44 (0) 1633 838088
Fax : +44 (0) 1633 867880
Email : enquiries@zero88.com
web : www.zero88.com
© Zero 88 Lighting Ltd. December 2002 (EU). Issue 1
E&OE. Zero 88 reserves the right to make changes to equipment and prices without prior notice.
800 mm